ETSI TS 102 916-2 V1.1.1 (2012-05)

Intelligent Transport Systems (ITS); Test specifications for the methods to ensure coexistence of Cooperative ITS G5 with RTTT DSRC; Part 2: Test Suite Structure and Test Purposes (TSS&TP)

DTS/ITS-0040023

General Information

• Status: Published
• Publication Date: 21-May-2012
• Technical Committee: ITS WG4 - Media and Medium related
• Current Stage: 12 - Completion
• Due Date: 30-May-2012
• Completion Date: 22-May-2012
• Mandate: M/453

Standards Content (Sample)

Technical Specification
Intelligent Transport Systems (ITS);
Test specifications for the methods to ensure coexistence
of Cooperative ITS G5 with RTTT DSRC;
Part 2: Test Suite Structure and Test Purposes (TSS&TP)

2 ETSI TS 102 916-2 V1.1.1 (2012-05)

Reference
DTS/ITS-0040023
Keywords
DSRC, ITS, radio, RTTT, TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2012.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI TS 102 916-2 V1.1.1 (2012-05)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Test configurations . 6
5 Test Suite Structure (TSS) . 7
5.1 Introduction . 7
5.1.1 TP naming convention . 7
5.1.2 Test strategy . 7
5.2 Test Purposes . 7
5.2.1 Calibration tests . 7
5.2.1.1 Reference measurement interference signal . 7
5.2.1.2 Reference measurement CEN DSRC tolling system . 8
5.2.1.3 BER reference measurement at the CEN DSRC tolling system with ITS interference . 9
5.2.2 Measurement 1: OBU sensitivity evaluation . 9
5.2.3 Measurement 2: Single interferer from front . 10
5.2.3.1 OBU Interference for different duty cycles, front position . 11
5.2.4 Measurement 3: Single ITS-G5A Station installed on rooftop . 11
5.2.4.1 OBU Interference power levels, ITS on rooftop . 12
History . 13

ETSI
4 ETSI TS 102 916-2 V1.1.1 (2012-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport System (ITS).
The present document is part 2 of a multi-part deliverable covering the test specifications for the methods to ensure
coexistence of cooperative ITS G5 with RTTT DSRC, as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS)";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP)";
Part 3: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)".
ETSI
5 ETSI TS 102 916-2 V1.1.1 (2012-05)
1 Scope
The present document provides the Test Suite Structure and Test Purposes (TSS&TP) for the test specifications for the
methods to ensure coexistence of cooperative ITS G5 with RTTT DSRC as specified in TS 102 792 [i.1] and
ES 202 663 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in
ISO/IEC 9646-7 [7] and ETS 300 406 [8].
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI ES 202 663: "Intelligent Transport Systems (ITS); European profile standard for the physical
and medium access control layer of Intelligent Transport Systems operating in the 5 GHz
frequency band".
[2] ETSI TS 102 916-1: "Intelligent Transport Systems (ITS); Test specifications for the methods to
ensure coexistence of Cooperative ITS G5 with RTTT DSRC; Part 1: Protocol Implementation
Conformance Statement (PICS)".
[3] CEN/EN 12253: "Road transport and traffic telematics - Dedicated Short Range Communication
(DSRC) - Physical layer using microwave at 5,8 GHz".
[4] CEN/EN 13372: "Road transport and traffic telematics - Dedicated Short Range Communication
(DSRC) - Profiles for RTTT applications".
[5] CEN/EN 15509: "Road transport and traffic telematics - Electronic fee collection - Interoperability
application profile DSRC".
[6] ISO/IEC 9646-1: "Information technology -- Open Systems Interconnection -- Conformance
testing methodology and framework -- Part 1: General concepts".
[7] ISO/IEC 9646-7: "Information technology -- Open Systems Interconnection -- Conformance
testing methodology and framework -- Part 7: Implementation Conformance Statements".
[8] ETSI ETS 300 406: "Methods for testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[9] ETSI TS 102 916-3: "Intelligent Transport Systems (ITS); Test specifications for the methods to
ensure coexistence of Cooperative ITS G5 with RTTT DSRC; Part 3: Abstract Test Suite (ATS)
and partial Protocol Implementation eXtra Information for Testing (PIXIT)".
ETSI
6 ETSI TS 102 916-2 V1.1.1 (2012-05)
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TS 102 792: "Intelligent Transport Systems (ITS); Mitigation techniques to avoid
interference between European CEN Dedicated Short Range Communication (RTTT DSRC)
equipment and Intelligent Transport Systems (ITS) operating in the 5 GHz frequency range".
[i.2] ETSI TR 102 960: "Intelligent Transport Systems (ITS); Mitigation techniques to avoid
interference between European CEN Dedicated Short Range Communication (RTTT DSRC)
equipment and Intelligent Transport Systems (ITS) operating in the 5 GHz frequency range;
Evaluation of mitigation methods and techniques ".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in TS 102 792 [i.1], ES 202 663 [1] and the
following apply:
Abstract Test Method (ATM): Refer to ISO/IEC 9646-1 [6].
Abstract Test Suite (ATS): Refer to ISO/IEC 9646-1 [6].
Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 [6].
Test Purpose (TP): Refer to ISO/IEC 9646-1 [6].
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in TS 102 792 [i.1], ES 202 663 [1] and the following
apply:
CEN Comité Européen de Normalisation
DSRC Dedicated Short Range Communication
ITS Intelligent Transport System
ITS-G5 Acronym for the 5,9 GHz vehicular adhoc network
OBU On Board Unit
RSU Road Side Unit
RX Receive
TP Test Purpose
TSS Test Suite Structure
TX Transmit
4 Test configurations
Test purposes of the present document address the mitigation techniques to avoid interference between European CEN
Dedicated Short Range Communication (RTTT DSRC) equipment and Intelligent Transport Systems (ITS) operating in
the 5 GHz frequency range. The test configurations defined in TR 102 960 [i.2] apply.
ETSI
7 ETSI TS 102 916-2 V1.1.1 (2012-05)
5 Test Suite Structure (TSS)
5.1 Introduction
Test Purposes have been written for mitigation techniques to avoid interference between European CEN Dedicated
Short Range Communication (RTTT DSRC) equipment and Intelligent Transport Systems (ITS) operating in the 5 GHz
frequency range as defined in TS 102 792 [i.1] and ES 202 663 [1]. All test purposes in the present document assess
mandatory functionality unless they have been marked with the keyword "OPTIONAL" at the beginning of the TP
summary.
The test purposes have been divided according to the functionalities into several groups:
• TP_CAL Calibration Measurements
• TP_COEX_OBU Co-existence Interference Tests OBU
5.1.1 TP naming convention
TPs are numbered, starting
...