ETSI EN 300 433-1 V1.1.3 (2000-12)

ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated citizen's band radio equipment; Part 1: Technical characteristics and methods of measurement

REN/ERM-RP02-055-1

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Storitev kopenskih mobilnih komunikacij – Radijska oprema za CB (Citizens Band) z amplitudno modulacijo in dvobočnim (DSB) oziroma enobočnim (SSB) prenosom – 1. del: Tehnične karakteristike in merilne metode

General Information

• Status: Published
• Publication Date: 14-Dec-2000
• Technical Committee: ERM RP02 - Land Mobile Radio A
• Current Stage: 12 - Completion
• Due Date: 28-Dec-2000
• Completion Date: 15-Dec-2000
• Ref Project: SIST EN 300 433-1 V1.1.3:2003 - ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated citizen's band radio equipment; Part 1: Technical characteristics and methods of measurement

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 433-1 V1.1.3:2003
01-december-2003
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50±
6WRULWHYNRSHQVNLKPRELOQLKNRPXQLNDFLM±5DGLMVNDRSUHPD]D&%&LWL]HQV%DQG
]DPSOLWXGQRPRGXODFLMRLQGYRERþQLP'6%R]LURPDHQRERþQLP66%SUHQRVRP
±GHO7HKQLþQHNDUDNWHULVWLNHLQPHULOQHPHWRGH
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service;
Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated citizen's
band radio equipment; Part 1: Technical characteristics and methods of measurement
Ta slovenski standard je istoveten z: EN 300 433-1 Version 1.1.3
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.01 Mobilni servisi na splošno Mobile services in general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 300 433-1 V1.1.3:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 433-1 V1.1.3:2003

---------------------- Page: 2 ----------------------

SIST EN 300 433-1 V1.1.3:2003
ETSI EN 300 433-1 V1.1.3 (2000-12)
European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Double Side Band (DSB) and/or Single Side Band (SSB)
amplitude modulated citizen's band radio equipment;
Part 1: Technical characteristics
and methods of measurement

---------------------- Page: 3 ----------------------

SIST EN 300 433-1 V1.1.3:2003
2 ETSI EN 300 433-1 V1.1.3 (2000-12)
Reference
REN/ERM-RP02-055-1
Keywords
CB,radio,testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 433-1 V1.1.3:2003
3 ETSI EN 300 433-1 V1.1.3 (2000-12)
Contents
Intellectual Property Rights .6
Foreword.6
Introduction.6
1 Scope.8
2 References.8
3 Definitions, abbreviations and symbols .9
3.1 Definitions . 9
3.2 Abbreviations. 9
3.3 Symbols . 9
4 General.10
4.1 Presentation of equipment for testing purposes. 10
4.2 Mechanical and electrical design. 10
4.2.1 General. 10
4.2.2 Controls. 10
4.2.3 Marking. 10
4.3 Interpretation of the measurement results. 10
5 Technical characteristics .11
5.1 Common characteristics. 11
5.1.1 Frequency band. 11
5.1.2 Carrier frequencies and channel numbers. 11
5.1.3 Channel spacing. 11
5.1.4 Multi-channel equipment. 11
5.1.5 Type of modulation. 11
5.1.6 Push-to-talk (ptt) and voice activated switch. 12
5.1.7 Combination with other equipment. 12
5.2 Transmitter parameter limits. 12
5.2.1 Frequency error. 12
5.2.2 Transmitter Radio Frequency (RF) power. 12
5.2.3 Adjacent channel power . 12
5.2.4 Spurious emissions of the transmitter. 13
5.2.5 Transient frequency behaviour of the transmitter . 14
5.2.6 Synthesizers. 14
5.3 Receiver parameter limits . 14
5.3.1 Maximum usable sensitivity. 14
5.3.2 Adjacent channel selectivity. 14
5.3.3 Intermodulation response rejection . 14
5.3.4 Spurious radiation. 15
5.3.5 Spurious response rejection . 15
6 Test conditions, power sources and ambient temperatures .15
6.1 Normal and extreme test conditions . 15
6.2 Test power source. 15
6.3 Normal test conditions. 16
6.3.1 Normal temperature and humidity . 16
6.3.2 Normal test power source. 16
6.3.2.1 Mains voltage and frequency . 16
6.3.2.2 Regulated lead-acid battery power sources on vehicles . 16
6.3.2.3 Other power sources . 16
6.4 Extreme test conditions. 16
6.4.1 Extreme temperatures. 16
6.4.2 Extreme test source voltages . 16
6.4.2.1 Mains voltage. 16
6.4.2.2 Regulated lead-acid battery power sources on vehicles . 16
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 433-1 V1.1.3:2003
4 ETSI EN 300 433-1 V1.1.3 (2000-12)
6.4.2.3 Power sources using other types of battery . 17
6.4.2.4 Other power sources . 17
6.5 Procedure for tests at extreme temperatures. 17
7 General conditions.17
7.1 Arrangements for test signals applied to the receiver input . 17
7.2 Receiver mute or squelch facility. 17
7.3 Receiver rated audio output power. 17
7.4 Transmitter rated RF power . 18
7.5 Normal test modulation . 18
7.5.1 DSB modulation . 18
7.5.2 SSB modulation. 18
7.6 Artificial antenna. 18
7.7 Test fixture. 19
7.8 Arrangement for test signals at the input of the transmitter . 19
7.9 Test site and general arrangements for radiated measurements. 19
8 Method of measurement for transmitter parameters.19
8.1 Frequency error. 19
8.1.1 Definition . 19
8.1.2 Method of measurement. 19
8.2 Transmitter RF power. 20
8.2.1 Definition . 20
8.2.2 Method of measurement (for equipment other than equipment with integral antenna only) . 20
8.2.3 Method of measurement for equipment with integral antenna. 20
8.3 Adjacent channel power . 21
8.3.1 Definition . 21
8.3.2 Method of measurement. 21
8.4 Spurious emissions. 22
8.4.1 Definition . 22
8.4.2 Method of measuring the power level in a specified load,((clause 8.4.1, a)). 22
8.4.3 Method of measuring the effective radiated power,((clause 8.4.1b)) . 22
8.4.4 Method of measuring the effective radiated power,((clause 8.4.1 c)). 23
8.5 Transient frequency behaviour of the transmitter. 23
8.5.1 Definitions. 23
8.5.2 Method of measurement. 24
9 Methods of measurement for receiver parameters.26
9.1 Maximum usable sensitivity . 26
9.1.1 Definition . 26
9.1.2 Method of measurement. 26
9.2 Adjacent channel selectivity . 26
9.2.1 Definition . 26
9.2.2 Method of measurement. 26
9.3 Inter-modulation response rejection . 27
9.3.1 Definition . 27
9.3.2 Method of measurement. 27
9.4 Spurious radiation . 27
9.4.1 Definition . 27
9.4.2 Method of measuring the power level in a specified load,((clause 9.4.1 a)). 28
9.4.3 Method of measuring the effective radiated power,((clause 9.4.1 b)) . 28
9.4.4 Method of measuring the effective radiated power,((clause 9.4.1 c)) . 29
9.5 Spurious response rejection . 29
9.5.1 Definition . 29
9.5.2 Method of measurement. 29
10 Measurement uncertainty.29
Annex A (normative): Radiated measurement .31
A.1 Test sites and general arrangements for measurements involving the use of radiated fields .31
A.1.1 Outdoor test site . 31
A.1.1.1 Test site for hand-portable stations . 31
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 433-1 V1.1.3:2003
5 ETSI EN 300 433-1 V1.1.3 (2000-12)
A.1.2 Test antenna. 32
A.1.3 Substitution antenna . 32
A.1.4 Optional additional indoor site. 33
A.2 Guidance on the use of radiation test sites .33
A.2.1 Measuring distance. 34
A.2.2 Test antenna. 34
A.2.3 Substitution antenna . 34
A.2.4 Artificial antenna. 34
A.2.5 Auxiliary cables . 34
A.3 Further optional alternative indoor test site using an anechoic chamber .34
A.3.1 Example of the construction of a shielded anechoic chamber. 35
A.3.2 Influence of parasitic reflections in anechoic chambers . 35
A.3.3 Calibration of the shielded anechoic chamber. 36
Annex B (normative): Specification for adjacent channel power measurement
arrangements .38
B.1 Power measuring receiver specification.38
B.1.1 IF filter. 38
B.1.2 Variable attenuator . 39
B.1.3 Rms value indicator. 39
B.1.4 Oscillator and amplifier . 39
History .40
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 433-1 V1.1.3:2003
6 ETSI EN 300 433-1 V1.1.3 (2000-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is the first part of a multi-part standard, the titles of which are:
Part 1: Technical characteristics and methods of measurement;
Part 2: Harmonized EN covering essential requirements under article 3.2 of R&TTE Directive.
Every EN prepared by ETSI is a voluntary standard. The present document contains text concerning the type approval
of equipment to which it relates. This text does not make the present document mandatory in its status as a standard.
However, the present document can be referenced, wholly or in part, for mandatory application by decisions of
regulatory bodies.
The national regulations on Citizens' Band (CB) equipment that permit the use of other types of modulation or power
levels will not necessarily be affected by the adoption of the present document.
National transposition dates
Date of latest announcement of this EN (doa): 31 March 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2001
Date of withdrawal of any conflicting National Standard (dow): 30 September 2001
Introduction
The present document is intended to specify the minimum performance and the methods of measurement of CB Double
Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated radio equipment as specified in the Scope.
Clause 5 provides the corresponding limits. These limits have been chosen to ensure an acceptable grade of service and
to minimize harmful interference to other equipment and services.
Administrative arrangements (e.g. for type approval, marking, antennas), and conditions for the use of CB DSB and/or
SSB amplitude modulated radios are to be determined by the national regulatory authorities.
The present document may be used by European notified accredited test laboratories for the assessment of the
performance of the equipment. In order to avoid any ambiguity in that assessment, the present document standard
contains instructions for the presentation of equipment for type testing purposes (clause 4), conditions (clauses 6 and 7)
and measurement methods (clauses 8 and 9).
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 433-1 V1.1.3:2003
7 ETSI EN 300 433-1 V1.1.3 (2000-12)
The present document was drafted on the assumption that:
a) the type test measurements would be performed only once in one of the accredited test laboratories, and then
accepted by the various authorities in order to obtain type approval;
b) if equipment available on the market is required to be checked it should be tested in accordance with the methods
specified in the present document.
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 433-1 V1.1.3:2003
8 ETSI EN 300 433-1 V1.1.3 (2000-12)
1 Scope
The present document applies to Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated
Citizen's Band (CB) radio equipment operating in the frequency band 26,960 MHz to 27,410 MHz with a channel
spacing of 10 kHz, and intended for analogue speech and/or data transmission.
The present document covers the minimum characteristics considered necessary in order to make the best use of the
available frequencies. It does not necessarily include all the characteristics that may be required by a user, nor does it
necessarily represent the optimum performance achievable.
The present document covers base stations, mobile stations and two categories of hand-portable stations.
The present document is complementary to ETS 300 135 [1] which concerns angle modulated CB radio equipment
(CEPT PR 27).
Any CB equipment covered by the present document that can also work with angle modulation is also required to meet
ETS 300 135 [1].
The present document is based upon existing national standards.
The present document applies to equipment with a socket for an external antenna and to equipment with an integral
antenna.
In the case of equipment that is intended for use with either an integral antenna or an external antenna, the equipment is
specified to be measured as equipment intended for use with an external antenna and specified to meet the appropriate
limits. In addition to this the following characteristics of the transmitter and receiver are specified to be measured as for
equipment for use with an integral antenna and the appropriate limits are defined:
- transmitter carrier power;
- spurious emissions of the transmitter;
- spurious radiation of the receiver.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] ETSI ETS 300 135 (1991): "Radio Equipment and Systems (RES); Angle-modulated Citizens
Band radio equipment (CEPT PR 27 Radio Equipment); Technical characteristics and methods of
measurement".
[2] CISPR Publication No 16-1 (1993): "Specification for radio disturbance and immunity measuring
apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus".
[3] CCITT Recommendation O.41 (1988): "Psophometer for use on telephone-type circuits".
[4] ETSI ETR 028 (1992): "Radio Equipment and Systems (RES); Uncertainties in the measurement
of mobile radio equipment characteristics".
[5] ETSI ETS 300 680-2: "Radio Equipment and Systems (RES); ElectroMagnetic Compatibility
(EMC) standard for Citizens Band (CB) radio and ancillary equipment (speech and/or non-
speech); Part 2: Double Side Band (DSB) and/or Single Side Band (SSB)".
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 433-1 V1.1.3:2003
9 ETSI EN 300 433-1 V1.1.3 (2000-12)
[6] Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member
States relating to electromagnetic compatibility.
3 Definitions, abbreviations and symbols
3.1 De
...