Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Test Case Library (TCL); Part 9: Abstract Test Suite (ATS) for Network (NWK) layer - Fixed radio Termination (FT)

DE/RES-03026-9

Radijska oprema in sistemi (RES) – Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Skupni vmesnik (CI) – Knjižnica preskušalnih primerov (TCL) – 9. del: Abstraktni preskušalni niz (ATS) za omrežno plast (NWK) – Fiksna radijska zaključitev (FT)

General Information

Status
Published
Publication Date
28-Aug-1996
Technical Committee
Current Stage
12 - Completion
Due Date
06-Sep-1996
Completion Date
29-Aug-1996
Mandate

Buy Standard

Standard
ETS 300 497-9 E1:2003
English language
366 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QHRadio Equipment and Systems (RES); Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI) Test Case Library (TCL); Part 9: Abstract Test Suite (ATS) for Network (NWK) layer - Fixed radio Termination (FT)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETS 300 497-9 Edition 1SIST ETS 300 497-9 E1:2003en01-december-2003SIST ETS 300 497-9 E1:2003SLOVENSKI
STANDARD



SIST ETS 300 497-9 E1:2003



EUROPEANETS 300 497-9TELECOMMUNICATIONAugust 1996STANDARDSource: ETSI TC-RESReference: DE/RES-03026-9ICS:33.020, 33.060.50Key words:Abstract Test Suites, DECT, GAPRadio Equipment and Systems (RES);Digital Enhanced Cordless Telecommunications (DECT);Common Interface (CI) Test Case Library (TCL);Part 9: Abstract Test Suite (ATS) for Network (NWK) layer -Fixed radio Termination (FT)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 497-9 E1:2003



Page 2ETS 300 497-9: August 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 497-9 E1:2003



Page 3ETS 300 497-9: August 1996ContentsForeword.51Scope.72Normative references.73Definitions, symbols and abbreviations.103.1DECT definitions.103.2DECT abbreviations.103.3ISO 9646 definitions.113.4ISO 9646 abbreviations.114Abstract Test Method (ATM).124.1ATM.124.2DLC primitives.134.2.1S-SAP primitives.134.2.2B-SAP primitives.164.3TC execution sequence.165Untestable Test Purposes (TPs).175.1Control protocol.176ATS Conventions.176.1Naming conventions.176.1.1Declarations part.176.1.1.1Test suite type, ASP and PDU type definitions.186.1.1.2Test Suite Operations (TSO) definitions.186.1.1.3Test Suite Parameter (TSP) declarations.186.1.1.4Test Case Selection (TCS) expression definitions.186.1.1.5Test Suite Constant (TSC) declarations.186.1.1.6Test Suite Variable (TSV) declarations.186.1.1.7Test Case Variable (TCV) declarations.196.1.1.8Point of Control and Observation (PCO) declarations.196.1.1.9Timer declarations.196.1.1.10ASP type definitions.196.1.1.11PDU type definitions.196.1.1.12Alias definitions.206.1.2Constraints part.206.1.3Dynamic part.216.1.3.1Test Case (TC) identifier.216.1.3.2Test Step (TS) identifier.226.1.3.3Default identifier.226.1.3.4General aspects.226.1.3.5ATS abbreviations.226.2Implementation conventions.236.2.1Declaration part.236.2.2Constraint part.236.2.3Dynamic part.236.2.4Documentation.24Annex A (normative):Abstract test suite for NWK testing.25A.1The machine processable ATS (TTCN.MP).25A.2The graphical ATS (TTCN.GR).25SIST ETS 300 497-9 E1:2003



Page 4ETS 300 497-9: August 1996Annex B (normative):Partial PIXIT proforma.355B.1Identification summary.355B.2ATS summary.355B.3Test laboratory.355B.4Client identification.355B.5SUT.355B.6Protocol layer information.356B.6.1Protocol identification.356B.6.2IUT information.356Annex C (normative):Protocol Conformance Test Report (PCTR) Proforma for DECT NWK.361C.1Identification summary.361C.1.1Protocol conformance test report.361C.1.2IUT identification.361C.1.3Testing environment.361C.1.4Limits and reservation.361C.1.5Comments.362C.2IUT Conformance status.362C.3Static conformance summary.362C.4Dynamic conformance summary.362C.5Static conformance review report.362C.6Test campaign report.363C.7Observations.364Annex D (informative):Bibliography.365History.366SIST ETS 300 497-9 E1:2003



Page 5ETS 300 497-9: August 1996ForewordThis European Telecommunication Standard (ETS) has been produced by the Radio Equipment andSystems (RES) Technical Committee of the European Telecommunications Standards Institute (ETSI).The DECT Test Specification multipart ETS comprises nine parts, as follows:Part 1:"Part 1: Test Suite Structure (TSS) and Test Purposes (TP) for Medium Access Control(MAC) layer".Part 2:"Part 2: Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Portable radioTermination (PT)".Part 3:"Part 3: Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Fixed radioTermination (FT)".Part 4:"Part 4: Test Suite Structure (TSS) and Test Purposes (TP) - Data Link Control (DLC) layer".Part 5:"Part 5: Abstract Test Suite (ATS) - Data Link Control (DLC) layer".Part 6:"Part 6: Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Portableradio Termination (PT)".Part 7:"Part 7: Abstract Test Suite (ATS) for Network (NWK) layer - Portable radio Termination(PT)".Part 8:"Part 8: Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Fixedradio Termination (FT)".Part 9:"Part 9: Abstract Test Suite (ATS) for Network (NWK) layer - Fixed radio Termination(FT)".Transposition datesDate of adoption of this ETS:16 August 1996Date of latest announcement of this ETS (doa):30 November 1996Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 May 1997Date of withdrawal of any conflicting National Standard (dow):31 May 1997SIST ETS 300 497-9 E1:2003



Page 6ETS 300 497-9: August 1996Blank pageSIST ETS 300 497-9 E1:2003



Page 7ETS 300 497-9: August 19961ScopeThis European Telecommunication Standard (ETS) contains the Abstract Test Suite (ATS) to test theNetwork (NWK) layer, Fixed radio Termination (FT).The objective of this test specification is to provide a basis for approval tests for DECT equipment giving ahigh probability of air interface inter-operability between different manufacturer's DECT equipment. Part 9of this test specification contains the Abstract Test Suite for testing of the NWK layer at the FT.The ISO standard for the methodology of conformance testing (ISO/IEC 9646) as well as the ETSI rulesfor conformance testing (protocol and profile conformance testing specifications, standardizationmethodology ETS 300 406) are used as basis for the test methodology.Test specifications for the
Physical Layer (PHL) are provided in other DECT standards.Annex B provides the partial PIXIT proforma.2Normative referencesThis ETS incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 175-1 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 1: Overview".[2]ETS 300 175-2 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 2: Physicallayer".[3]ETS 300 175-3 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 3: Mediumaccess control layer".[4]ETS 300 175-4 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 4: Data linkcontrol layer".[5]ETS 300 175-5 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 5: Networklayer".[6]ETS 300 175-6 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 6: Identitiesand addressing".[7]ETS 300 175-7 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 7: Securityfeatures".[8]ETS 300 175-8 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 8: Speechcoding and transmission".[9]ETS 300 175-9 (1992): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common interface; Part 9: Publicaccess profile".[10]ETS 300 444: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Generic Access Profile (GAP)".SIST ETS 300 497-9 E1:2003



Page 8ETS 300 497-9: August 1996[11]ETS 300 370: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications/Global System for Mobile communications(DECT/GSM) inter-working profile; Access and mapping (Protocol/proceduredescription for 3,1 kHz speech service)".[12]ETS 300 434: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT) and Integrated Services Digital Network(ISDN) inter-working for end system configuration".[13]ETS 300 331: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); DECT Authentication Module (DAM)".[14]CCITT Recommendation G.726 (1991): "40, 32, 24, 16 kbit/s adaptivedifferential pulse code modulation (ADPCM)".[15.20]Reserved values[21]ISO/IEC 9646-1 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 1:General concepts". (See also CCITT Recommendation X.290 (1991)).[22]ISO/IEC 9646-2 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 2:Abstract test suite specification". (See also CCITT Recommendation X.291(1991)).[23]ISO/IEC 9646-3 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 3:The tree and tabular combined notation". (See also CCITT RecommendationX.292 (1992)).[24]ISO/IEC 9646-4 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 4:Test realisation". (See also CCITT Recommendation X.292 (1992)).[25]ISO/IEC 9646-5 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 5:Requirements on test laboratories and clients for the conformance assessmentprocess". (See also CCITT Recommendation X.292 (1992)).[26]ISO/IEC 9646-6 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 6:Protocol profile test specification".[27]ISO/IEC 9646-7 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 7:Implementation conformance statement".[28]ISO 7498: "Information Processing Systems - Open Systems Interconnection -Basic Reference model".[29]ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocoland profile conformance testing specifications; Standardization methodology".[30]91/263/EEC: "Council Directive of 29 April 1991 on the approximation of thelaws of the Member states concerning telecommunications terminal equipment,including the mutual recognition of their conformity. (Terminal Directive)".[31.40]Reserved values[41]I-ETS 300 176: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Approval test specification".SIST ETS 300 497-9 E1:2003



Page 9ETS 300 497-9: August 1996[42]TBR 6: "Radio Equipment and Systems (RES); Digital European CordlessTelecommunications (DECT); General terminal attachment requirements".[43]TBR 10: "Radio Equipment and Systems (RES); Digital European CordlessTelecommunications (DECT); General terminal attachment requirements:Telephony applications".[44]TBR 11 (1992): "Radio Equipment and Systems (RES); Attachmentrequirements for terminal equipment for Digital European CordlessTelecommunications (DECT) Public Access Profile (PAP) applications".[45]ETS 300 323 (1994): "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Public Access Profile (PAP) testspecification".[46]ETS 300 476: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma".[47]ETS 300 497: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI) Test CaseLibrary (TCL)".[48]ETS 300 474: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Generic Access Profile (GAP); Profilerequirement list and profile specific Implementation Conformance Statement(ICS) proforma".[49]ETS 300 494: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Generic Access Profile (GAP); ProfileTest Specification (PTS)".[50]TBR 22: "Radio Equipment and Systems (RES); Attachment requirements forterminal equipment for Digital Enhanced Cordless Telecommunications (DECT)Generic Access Profile (GAP) applications".SIST ETS 300 497-9 E1:2003



Page 10ETS 300 497-9: August 19963Definitions, symbols and abbreviations3.1DECT definitionsFor the purposes of this ETS, the definitions given in ISO/IEC 9646-1 [21], ISO/IEC 9646-2 [22],ETS 300 175-1 [1], ETS 300 175-5 [5], ETS 300 175-6 [6] and ETS 300 175-7 [7] apply.3.2DECT abbreviationsFor the purposes of this ETS, the NWK layer abbreviations defined in ETS 300 175-5 [5] and the followingabbreviations apply:ACAuthentication CodeARAccess RightsAUAuthenticationCACapabilityCCCall ControlCCSMCall Control State MachineCICall InformationCHCipheringCRCall ReleaseCTSConformance Testing ServicesDECTDigital Enhanced Cordless TelecommunicationDLCData Link Control layerETSIEuropean Telecommunications Standards InstituteFTFixed radio terminationGAPGeneric Access ProfileICIncoming CallIDIdentificationIPUIInternational Portable User IdentityIPEIInternational Portable Equipment IdentityKAKey AllocationLCLink Control entityLEConnection oriented Link EstablishmentLLConnectionLess Link controlLOLocationLRConnection oriented Link ReleaseLSConnection oriented Link Suspend and resumeMACMedium Access Control layerMEManagement EntityMLConnectionless Message ServicesMMMobility ManagementMOConnection Oriented Message ServicesNWKNetwork layerOCOutgoing CallPAPPublic Access ProfilePARKPortable Access Rights KeyPMPacket ModePRParameter RetrievalPTPortable radio terminationRPNRadio Fixed Part NumberRSCall Related Supplementary ServicesSCService ChangeUAKUser Authentication KeySIST ETS 300 497-9 E1:2003



Page 11ETS 300 497-9: August 19963.3ISO 9646 definitionsFor the purposes of this ETS, the following ISO 9646 definitions apply:Implementation Under Test (IUT)System Under Test (SUT)Abstract Test Suite (ATS)Point of Control and Observation (PCO)Protocol Implementation Conformance Statement (PICS)Protocol Implementation eXtra Information for Testing (PIXIT)Lower Tester (LT)Upper Tester (UT)3.4ISO 9646 abbreviationsFor the purposes of this ETS, the following ISO 9649 abbreviations apply:ATSAbstract Test SuiteASPAbstract Service PrimitiveBIInvalid BehaviourBOInOpportune BehaviourBVValid BehaviourCACapability testsETSEuropean Telecommunication StandardISOInternational Organisation for StandardisationIUTImplementation Under TestIWUInterWorking UnitLTLower TesterPDUProtocol Data UnitPHLPhysical LayerPICSProtocol Implementation Conformance StatementsPIXITProtocol Implementation eXtra Information for TestingSUTSystem Under TestTPTest PurposeTSOTest Suite OperationTSPTest Suite ParameterTSSTest Suite StructureTTCNTree and Tabular Combined NotationUTUpper TesterSIST ETS 300 497-9 E1:2003



Page 12ETS 300 497-9: August 19964Abstract Test Method (ATM)This clause describes the ATM, the Point of Control and Observation (PCO) used to test the NWK layer ofthe FT.4.1ATMTest SystemUpperLayersDECT PHL and radio communicationLTDECT MAC layerDECT MAC layerDECT DLC layerDECT DLC layerDECT DLC layerSUTDLC-PrimitivesDECT NWKIUTFixed TerminationNWK-PDUsDLC-PCO/DSAPFigure 1: Remote Single Layer Test Method Embedded variantLT1:a lower tester (LT1) is located in a remote DECT test system. It controls andobserves the behaviour of the IUT.DSAP:a unique DLC SAP is defined at the DECT interface and used to exchangeservice data of the NWK protocol.PCO:the PCO for Network Layer testing is located on the DSAP. All test events at thePCO are specified in terms of DLC ASPs and NWK PDUs.Upper layers/tester:no explicit upper tester (UT) exists in the test system. However, the SUT needsto carry out some UL functions to achieve some effects of test co-ordinationprocedures. Designing ATS, the capability of the IWU, such as PSTN, ISDN orGSM IWUs might be taken into account. An example of such controls could beto provoke restarting of the IUT through the Q interface.SIST ETS 300 497-9 E1:2003



Page 13ETS 300 497-9: August 19964.2DLC primitivesIn this subclause the DSAP primitives are defined according to ETS 300 175-4 [4], subclause 8.3.2 (S-SAP primitives) and ETS 300 175-4 [4], subclause 8.3.3 (B-SAP primitives).4.2.1S-SAP primitivesTable 1: DL_DATA_IND primitiveASP DeclarationASP NAMEDL_DATA_INDPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.3Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6message_unitPDUETS 300 175-4 [4], subclause 8.3.1Table 2: DL_DATA_REQ primitiveASP DeclarationASP NAMEDL_DATA_REQPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.3Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6message_unitPDUETS 300 175-4 [4], subclause 8.3.1Table 3: DL_ENCRYPT_CNF primitiveASP DeclarationASP NAMEDL_ENCRYPT_CNFPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.8Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6encription_statusCIPHER_STATUS(INTEGER(0,1))ETS 300 175-4 [4], subclause 8.3.1Table 4: DL_ENCRYPT_IND primitiveASP DeclarationASP NAMEDL_ENCRYPT_INDPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.8Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6connection_identitiesCONNECTION_IDENTITIES(OCTETSTRING)ETS 300 175-4 [4], subclause 8.3.1encription_statusCIPHER_STATUS(INTEGER(0,1)ETS 300 175-4 [4], subclause 8.3.1SIST ETS 300 497-9 E1:2003



Page 14ETS 300 497-9: August 1996Table 5: DL_ENCRYPT_REQ primitiveASP DeclarationASP NAMEDL_ENCRYPT_REQPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.8Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6connection_identitiesCONNECTION_IDENTITIES(OCTETSTRING)ETS 300 175-4 [4], subclause 8.3.1encription_statusCIPHER_STATUS(INTEGER(0,1)ETS 300 175-4 [4], subclause 8.3.1Table 6: DL_ENC_KEY_REQ primitiveASP DeclarationASP NAMEDL_ENC_KEY_REQPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.7Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], 7.3.6connection_identitiesCONNECTION_IDENTITIES(OCTETSTRING)ETS 300 175-4 [4], 8.3.1encription_keyENCRYPTION_KEY(BITSTRING[64])ETS 300 175-4 [4], 8.3.1Table 7: DL_ESTABLISH_CNF primitiveASP DeclarationASP NAMEDL_ESTABLISH_CNFPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.1Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6Table 8: DL_ESTABLISH_IND primitiveASP DeclarationASP NAMEDL_ESTABLISH_INDPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.1Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6establish_modeESTABLISH_MODE(INTEGER(0,1,2)ETS 300 175-4 [4], subclause 8.3.1radio_fixed_part_numberRADIO_FIXED_PART_NUMBER(INTEGER)ETS 300 175-4 [4], subclause 8.3.1message_unitPDUETS 300 175-4 [4], subclause 8.3.1SIST ETS 300 497-9 E1:2003



Page 15ETS 300 497-9: August 1996Table 9: DL_ESTABLISH_REQ primitiveASP DeclarationASP NAMEDL_ESTABLISH_REQPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.1Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6establish_modeESTABLISH_MODE(INTEGER(0,1,2)ETS 300 175-4 [4], subclause 8.3.1radio_fixed_part_numberRADIO_FIXED_PART_NUMBER(INTEGER)ETS 300 175-4 [4], subclause 8.3.1message_unitPDUETS 300 175-4 [4], subclause 8.3.1Table 10: DL_ESTABLISH_RES primitiveASP DeclarationASP NAMEDL_ESTABLISH_RESPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.1Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6Table 11: DL_RELEASE_CNF primitiveASP DeclarationASP NAMEDL_RELEASE_CNFPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.2Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6release_modeRELEASE_MODE(INTEGER(0,1)ETS 300 175-4 [4], subclause 8.3.1Table 12: DL_RELEASE_IND primitiveASP DeclarationASP NAMEDL_RELEASE_INDPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.2Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6release_modeRELEASE_MODE(INTEGER(0,1)ETS 300 175-4 [4], subclause 8.3.1SIST ETS 300 497-9 E1:2003



Page 16ETS 300 497-9: August 1996Table 13: DL_RELEASE_REQ primitiveASP DeclarationASP NAMEDL_RELEASE_REQPCO TYPES-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.2.2Service control informationParameter nameTypeCommentsdata_link_endpoint_identifierDATA_LINK_ENDPOINT_IDENTIFIER(INTEGER)ETS 300 175-4 [4], subclause 7.3.6release_modeRELEASE_MODE(INTEGER(0,1)ETS 300 175-4 [4], subclause 8.3.14.2.2B-SAP primitivesTable 14: DL_BROADCAST_IND primitiveASP DeclarationASP NAMEDL_BROADCAST_INDPCO TYPEB-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.3.1Service control informationParameter nameTypeCommentscluster_address_listCLUSTER_ADDRESS_LIST(OCTETSTRING)ETS 300 175-4 [4], subclause 8.3.1message_unitPDUETS 300 175-4 [4], subclause 8.3.1extended_message_flagBIT_1(BITSTRING[1])ETS 300 175-4 [4], subclause 8.3.1error_flagBIT_1(BITSTRING[1])ETS 300 175-4 [4], subclause 8.3.1Table 15: DL_BROADCAST_REQ primitiveASP DeclarationASP NAMEDL_BROADCAST_REQPCO TYPEB-SAPCOMMENTSETS 300 175-4 [4], subclause 8.3.3.1Service control informationParameter nameTypeCommentscluster_address_listCLUSTER_ADDRESS_LIST(OCTETSTRING)ETS 300 175-4 [4], subclause 8.3.1message_unitPDUETS 300 175-4 [4], subclause 8.3.1extended_message_flagBIT_1(BITSTRING[1])ETS 300 175-4 [4], subclause 8.3.14.3TC execution sequenceThe test cases can be executed in any order, there are no restrictions on this matter.SIST ETS 300 497-9 E1:2003



Page 17ETS 300 497-9: August 19965Untestable Test Purpo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.