Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D): Designers' guide; Part 7: TETRA High-Speed Data (HSD); TETRA Enhanced Data Service (TEDS)

RTR/TCCE-04185

General Information

Status
Published
Publication Date
02-Nov-2016
Technical Committee
Current Stage
12 - Completion
Due Date
01-Nov-2016
Completion Date
03-Nov-2016
Ref Project

Buy Standard

Standard
ETSI TR 102 300-7 V1.2.1 (2016-11) - Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D): Designers' guide; Part 7: TETRA High-Speed Data (HSD); TETRA Enhanced Data Service (TEDS)
English language
205 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TR 102 300-7 V1.2.1 (2016-11)






TECHNICAL REPORT
Terrestrial Trunked Radio (TETRA);
Voice plus Data (V+D): Designers' guide;
Part 7: TETRA High-Speed Data (HSD);
TETRA Enhanced Data Service (TEDS)

---------------------- Page: 1 ----------------------
2 ETSI TR 102 300-7 V1.2.1 (2016-11)



Reference
RTR/TCCE-04185
Keywords
data, service, TETRA

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TR 102 300-7 V1.2.1 (2016-11)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 9
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definitions and abbreviations . 12
3.1 Definitions . 12
3.2 Abbreviations . 18
4 TETRA layered architecture . 22
4.1 OSI reference model . 22
4.2 TETRA protocol stack . 23
4.2.1 Protocol architecture . 23
4.2.2 Inter-layer communication . 25
4.2.3 Testable boundaries . 25
4.2.4 Service access points . 25
5 Overview of TETRA High-Speed Data (HSD) . . 25
5.1 Introduction . 25
5.2 Physical layer and lower MAC layer enhancements . 27
5.3 Higher protocol layer enhancements . 28
5.4 Services and applications . 28
6 Physical layer and lower MAC . 29
6.1 Physical resources . 29
6.2 TDMA frame structure . 30
6.3 Slot structure . 31
6.3.1 Slot structure for phase modulation . 31
6.3.2 Slot structure for QAM . 32
6.4 Radio transmission burst structure . 33
6.4.1 Burst structure for phase modulation . 33
6.4.2 Burst structure for QAM . 35
6.4.3 Burst structure formats . 36
6.4.3.1 Phase modulated burst formats . 36
6.4.3.2 QAM modulated burst formats . 37
6.5 Channel structure . 38
6.5.0 General . 38
6.5.1 Logical channels in phase modulation . 38
6.5.1.0 Logical channel categories . 38
6.5.1.1 Control CHannel (CCH) . 39
6.5.1.2 Traffic CHannel (TCH) . 39
6.5.2 QAM channels . 40
6.5.3 Mapping of logical channels into physical channels . 41
6.5.3.1 Mapping in phase modulation . 41
6.5.3.2 Mapping in QAM . 41
6.6 Reference configuration . 42
6.6.1 Reference configuration for phase modulation . 42
6.6.2 Reference configuration for QAM . 43
6.7 Modulation . 43
6.7.1 Phase modulation . 43
6.7.2 QAM . 45
6.7.2.1 Modulation types . 45
6.7.2.2 Bit to symbol mapping . 45
6.7.2.3 Comparison of gross bit rates . 49
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TR 102 300-7 V1.2.1 (2016-11)
6.8 Error control (lower MAC) . 49
6.8.1 General . 49
6.8.2 Error control schemes for phase modulation . 51
6.8.3 Error control schemes for QAM channels . 52
6.8.3.0 General . 52
6.8.3.1 Slot Information CHannel - QAM/Uplink (SICH-Q/U). 53
6.8.3.2 Slot Information CHannel - QAM/Downlink (SICH-Q/D) . 53
6.8.3.3 Access Assignment CHannel - QAM (AACH-Q). 54
6.8.3.4 Signalling Channel - QAM/Half slot Uplink (SCH-Q/HU) . 54
6.8.3.5 Signalling CHannel - QAM/Uplink (SCH-Q/U) . 55
6.8.3.6 Signalling CHannel - QAM/Downlink (SCH-Q/D) and Broadcast Network CHannel - QAM
(BNCH-Q) . 55
6.8.3.7 Signalling CHannel - QAM/Random Access (SCH-Q/RA) . 55
6.8.3.8 Broadcast Synchronization CHannel - QAM (BSCH-Q) . 56
6.8.3.9 Signalling CHannel data set B - QAM (SCH-Q/B) . 56
6.8.4 Coding for phase modulation . 56
6.8.4.1 General . 56
6.8.4.2 16-state Rate-Compatible Punctured Convolutional (RCPC) codes . 56
6.8.4.3 Shortened (30,14) Reed-Muller block codes . 58
6.8.4.4 Cyclic Redundancy Check (CRC) block code . 58
6.8.5 Coding for QAM channels . 59
6.8.5.0 General . 59
6.8.5.1 8-state Parallel Concatenated Convolutional Code (PCCC) for QAM . 60
6.8.5.1.0 PCCC encoding . 60
6.8.5.1.1 Encoding by the upper 8-state RSC encoder of rate 1/2 . 60
6.8.5.1.2 Interleaving by the quadratic-congruence interleaver . 61
6.8.5.1.3 Encoding the interleaved bits by the lower 8 state RSC encoder of rate 1/2 . 62
6.8.5.1.4 Merging the systematic and parity bits for the PCCC encoder . 62
6.8.5.1.5 Puncturing scheme for the PCCC encoder . 62
6.8.5.1.6 Puncturing mask for the PCCC encoder with coding rate 2/3 . 63
6.8.5.1.7 Puncturing mask for the PCCC encoder with coding rate 1/2 . 63
6.8.5.2 (16,5) Reed-Muller (RM) code for QAM . 63
6.8.6 Interleaving for phase modulation . 63
6.8.7 Interleaving for QAM channels . 64
6.8.8 Scrambling . 65
6.8.8.1 General . 65
6.8.8.2 Scrambling method . 65
6.9 Synchronization and channel estimation . 66
6.9.1 Frequency and time synchronization . 66
6.9.1.1 Requirements . 66
6.9.1.1.1 BS requirements . 66
6.9.1.1.2 MS requirements . 66
6.9.1.2 Synchronization on a CA cell. 66
6.9.1.2.1 Initial synchronization via π/4-DQPSK plus π/8-D8PSK - CA . 66
6.9.1.2.2 Fine synchronization in QAM channels - CA . 67
6.9.1.3 Synchronization on a DA cell . 69
6.9.2 Channel estimation in QAM channels . 70
6.10 Power control . 71
6.11 Link adaptation in TETRA high speed channels . 71
7 Higher layer protocol. 72
7.1 Protocol architecture. 72
7.1.1 General packet data aspects . 72
7.1.2 Architecture of the TETRA protocol stack . 72
7.2 Multimedia Exchange layer . 74
7.2.1 General MEX features . 74
7.2.2 MEX routing services . 74
7.2.3 MEX precedence . 74
7.3 Subnetwork Dependent Convergence Protocol layer . 75
7.3.1 Outline of SNDCP . 75
7.3.2 Application-level QoS parameters . 78
7.3.3 QoS negotiation . 80
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TR 102 300-7 V1.2.1 (2016-11)
7.3.4 QoS filtering information for secondary PDP contexts . 80
7.3.5 Assignment of PDP contexts to layer 2 communication links . 81
7.3.6 Choice of layer 2 communication link parameters . 81
7.3.7 Selection of channel . 82
7.3.7.1 Initial PDCH access . 82
7.3.7.2 Changing PDCH requirements . 82
7.3.8 Header and data compression . 83
7.3.9 Data priority in SNDCP . 83
7.3.10 Reconnection following cell reselection . 83
7.4 Operation of the data link layer (layer 2) protocol . 84
7.4.1 Structure of the data link layer . 84
7.4.2 Control channel usage . 85
7.4.2.1 Common control channels and assigned channels . 85
7.4.2.1.1 General . 85
7.4.2.1.2 Common control channels . 85
7.4.2.1.3 Assigned channels . 86
7.4.2.1.4 Sharing channels between cells . 88
7.4.2.2 π/4-DQPSK channel . 88
7.4.2.3 D8PSK channel . 88
7.4.2.4 QAM channel . 89
7.4.2.5 Slot and TDMA frame arrangement on uplink and downlink . 89
7.4.2.6 Minimum mode for CA . 90
7.4.2.7 Discontinuous downlink transmissions - time-sharing mode . 90
7.4.2.8 Independent allocation of uplink and downlink . 91
7.4.3 Communication links provided by the LLC . 91
7.4.3.1 General . 91
7.4.3.2 Basic link . 92
7.4.3.3 Advanced link . 93
7.4.3.4 Advanced link usage . 94
7.4.3.4.1 Advanced link set-up . 94
7.4.3.4.2 Segment size for advanced link . 95
7.4.3.5 Layer 2 signalling . 96
7.4.4 Some MAC processes . 97
7.4.4.1 General . 97
7.4.4.2 Addressing . 98
7.4.4.2.1 General . 98
7.4.4.2.2 Layer 2 addressing . 99
7.4.4.3 Random access . 99
7.4.4.3.1 General . 99
7.4.4.3.2 Overview of random access channel on 25 kHz channel . 101
7.4.4.3.3 Overview of random access channel on 50 kHz, 100 kHz or 150 kHz QAM channel . 103
7.4.4.4 Reserved access . 104
7.4.4.4.1 Use of reserved access . 104
7.4.4.4.2 Basic slot granting . 104
7.4.4.4.3 Multiple slot granting . 104
7.4.4.5 Channel allocation . 105
7.4.4.6 Power control . 106
7.4.4.6.1 General . 106
7.4.4.6.2 Open loop power control . 106
7.4.4.6.3 Closed loop power control . 107
7.5 Link adaptation on D8PSK or QAM channel . 107
7.5.1 General . 107
7.5.2 Algorithm using predefined choice of bit rates . 108
7.5.3 Algorithm adapting with channel conditions . 109
7.6 Energy economy and napping . 111
7.6.0 Methods for reduced reception . 111
7.6.1 Energy economy, dual watch and part-time reception on common control channel . 111
7.6.1.1 Energy economy mode . 111
7.6.1.2 Dual watch mode . 112
7.6.1.3 Part-time reception on multi-slot MCCH-Q . 113
7.6.2 Napping on assigned channel. 113
7.7 Data priority . 114
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TR 102 300-7 V1.2.1 (2016-11)
7.8 Scheduled access .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.