ETSI EN 301 428 V1.3.1 (2006-02)

Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive

REN/SES-00270

Satelitske zemeljske postaje in sistemi (SES) – Harmonizirani EN za satelitske terminale z zelo majhno antensko odprtino (VSAT) – oddajne, oddajno-sprejemne ali sprejemne satelitske zemeljske postaje, delujoče v frekvenčnih pasovih 11/12/14 GHz – ki zajema bistvene zahteve člena 3.2 direktive R&TTE

General Information

• Status: Published
• Publication Date: 23-Aug-2006
• Technical Committee: SES HARM - SES WG on R&TTE dir. 99/5/EC and and RED dir. 2014/53/EU
• Current Stage: 12 - Completion
• Due Date: 24-Feb-2006
• Completion Date: 13-Feb-2006
• Mandate: M/284
• Ref Project: SIST EN 301 428 V1.3.1:2006 - Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive

Relations

• Official Journal Project Relation: ETSI EN 301 428 V1.2.1 (2001-02) - Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive
• Effective Date: 01-Dec-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 428 V1.3.1:2006
01-junij-2006
6DWHOLWVNH]HPHOMVNHSRVWDMHLQVLVWHPL6(6±+DUPRQL]LUDQL(1]DVDWHOLWVNH
WHUPLQDOH]]HORPDMKQRDQWHQVNRRGSUWLQR96$7±RGGDMQHRGGDMQRVSUHMHPQH
KSDVRYLKDOLVSUHMHPQHVDWHOLWVNH]HPHOMVNHSRVWDMHGHOXMRþHYIUHNYHQþQL
*+]±NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(
Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture
Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations
operating in the 11/12/14 GHz frequency bands covering essential requirements under
article 3.2 of the R&TTE directive
Ta slovenski standard je istoveten z: EN 301 428 Version 1.3.1
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
SIST EN 301 428 V1.3.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 428 V1.3.1:2006

---------------------- Page: 2 ----------------------

SIST EN 301 428 V1.3.1:2006

ETSI EN 301 428 V1.3.1 (2006-02)
Candidate Harmonized European Standard (Telecommunications series)

Satellite Earth Stations and Systems (SES);
Harmonized EN for Very Small Aperture Terminal (VSAT);
Transmit-only, transmit/receive or receive-only satellite earth
stations operating in the 11/12/14 GHz frequency bands
covering essential requirements under
article 3.2 of the R&TTE directive

---------------------- Page: 3 ----------------------

SIST EN 301 428 V1.3.1:2006
 2 ETSI EN 301 428 V1.3.1 (2006-02)



Reference
REN/SES-00270
Keywords
regulation, satellite, VSAT
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2006.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 428 V1.3.1:2006
 3 ETSI EN 301 428 V1.3.1 (2006-02)
Contents
Intellectual Property Rights.7
Foreword.7
Introduction .8
1 Scope.11
2 References.12
3 Definitions and abbreviations.12
3.1 Definitions.12
3.2 Abbreviations.14
4 Technical requirements specifications.15
4.1 General.15
4.1.1 Environmental profile.15
4.1.2 Control and Monitoring Functions (CMF).15
4.1.3 Operational configurations.15
4.1.4 Transmit VSAT states and radio states.15
4.1.4.1 Definitions.15
4.1.4.2 Class A CMF.16
4.1.4.3 Class B CMF.16
4.1.4.4 Radio states.16
4.2 Conformance requirements.17
4.2.1 Off-axis spurious radiation .17
4.2.1.1 Justification.17
4.2.1.2 Specification.17
4.2.1.2.1 Transmit VSAT.17
4.2.1.2.2 Receive-only VSAT.18
4.2.1.3 Conformance tests.19
4.2.2 On-axis spurious radiation for transmit VSAT .19
4.2.2.1 Justification.19
4.2.2.2 Specification.19
4.2.2.2.1 Specification 1: "Carrier-on" radio state.19
4.2.2.2.2 Specification 2: "Carrier-off" and "Emissions disabled" radio states.19
4.2.2.3 Conformance tests.19
4.2.3 Off-axis e.i.r.p emission density within the band.19
4.2.3.1 Justification.20
4.2.3.2 Specification.20
4.2.3.3 Conformance tests.21
4.2.4 Carrier suppression.21
4.2.4.1 Justification.21
4.2.4.2 Specification.21
4.2.4.3 Conformance tests.21
4.2.5 Mechanical (antenna pointing) for transmit VSAT .22
4.2.5.1 Justification.22
4.2.5.2 Specification.22
4.2.5.3 Conformance tests.22
4.2.6 Class A Control and Monitoring Functions .22
4.2.6.1 Control and Monitoring Functions (CMF).22
4.2.6.1.1 General.22
4.2.6.1.2 CMF state transition diagram .22
4.2.6.1.3 Specification of states.24
4.2.6.2 Control Channels (CC).24
4.2.6.2.1 Justification.24
4.2.6.2.2 Specification.25
4.2.6.2.3 Conformance tests.25
4.2.6.3 Self monitoring functions.25
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 428 V1.3.1:2006
 4 ETSI EN 301 428 V1.3.1 (2006-02)
4.2.6.3.1 General.25
4.2.6.3.2 Processor monitoring.26
4.2.6.3.3 Transmit subsystem monitoring.26
4.2.6.3.4 VSAT transmission validation.26
4.2.6.4 Reception of commands from the CCMF .28
4.2.6.4.1 General.28
4.2.6.4.2 Disable message.28
4.2.6.4.3 Enable Message.28
4.2.6.5 Power-on/Reset.28
4.2.6.5.1 Justification.28
4.2.6.5.2 Specification.28
4.2.6.5.3 Conformance tests.29
4.2.7 Class B Control and Monitoring Functions .29
4.2.7.1 Processor monitoring.30
4.2.7.1.1 Justification.30
4.2.7.1.2 Specification.30
4.2.7.1.3 Conformance tests.30
4.2.7.2 Transmit subsystem monitoring.30
4.2.7.2.1 Justification.30
4.2.7.2.2 Specification.30
4.2.7.2.3 Conformance tests.30
4.2.7.3 Power-on/Reset.30
4.2.7.3.1 Justification.30
4.2.7.3.2 Specification.30
4.2.7.3.3 Conformance tests.31
4.2.7.4 Control Channel (CC) reception .31
4.2.7.4.1 Justification.31
4.2.7.4.2 Specification.31
4.2.7.4.3 Conformance tests.31
4.2.7.5 Network control commands .31
4.2.7.5.1 Justification.31
4.2.7.5.2 Specification.31
4.2.7.5.3 Conformance test.31
4.2.7.6 Initial burst transmission .32
4.2.7.6.1 Justification.32
4.2.7.6.2 Specification.32
4.2.7.6.3 Conformance tests.32
5 Testing for compliance with technical requirements.32
5.1 Environmental conditions for testing .32
5.2 Essential radio test suites.32
6 Test methods for the complete VSAT.32
6.1 General.32
6.2 Off-axis spurious radiation.33
6.2.1 Test method.33
6.2.1.0 Multi-carrier operation.34
6.2.1.1 Up to 1 000 MHz .34
6.2.1.1.1 Test site.34
6.2.1.1.2 Measuring receivers.34
6.2.1.1.3 Procedure.35
6.2.1.2 Above 1 000 MHz.35
6.2.1.2.1 Identification of the significant frequencies of spurious radiation .35
6.2.1.2.2 Measurement of radiated power levels of identified spurious radiation.36
6.2.1.2.3 Measurement of conducted spurious radiation at the antenna flange .37
6.3 On-axis spurious radiation for transmit VSAT.38
6.3.1 Test method.38
6.3.1.1 Test site.38
6.3.1.2 Method of measurement.38
6.3.1.2.1 General.38
6.3.1.2.2 Method of measurement at the antenna flange .38
6.3.1.2.3 Method of measurement with a test antenna .39
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 428 V1.3.1:2006
 5 ETSI EN 301 428 V1.3.1 (2006-02)
6.4 Off-axis e.i.r.p emission density within the band .40
6.4.1 Test method.40
6.4.1.1 General.40
6.4.1.2 Transmit output power density.40
6.4.1.2.1 General.40
6.4.1.2.2 Test site.40
6.4.1.2.3 Method of measurement.41
6.4.1.3 Antenna transmit gain.42
6.4.1.3.1 General.42
6.4.1.3.2 Test site.42
6.4.1.3.3 Method of measurement.42
6.4.1.4 Antenna transmit radiation patterns .43
6.4.1.4.1 General.43
6.4.1.4.2 Test site.43
6.4.1.4.3 Test arrangement.43
6.4.1.4.4 Co-polar radiation pattern-azimuth.43
6.4.1.4.5 Co-polar radiation pattern-elevation.44
6.4.1.4.6 Cross-polar radiation pattern-azimuth .45
6.4.1.4.7 Cross-polar radiation pattern-elevation .45
6.4.2 Computation of results.46
6.5 Carrier suppression.46
6.5.1 Test method.46
6.6 Antenna pointing for transmit VSAT .46
6.6.1 Test method.46
6.7 Class A Control and Monitoring Functions.47
6.7.1 General.47
6.7.2 Test arrangement.47
6.7.3 Control Channels (CC) .48
6.7.3.1 Test method.48
6.7.3.1.1 Test method for internal CC .48
6.7.3.1.2 Test method for external CC .49
6.7.4 Processor monitoring.49
6.7.4.1 Test method.49
6.7.5 Transmit subsystem monitoring.49
6.7.5.1 Test method.49
6.7.6 VSAT transmission validation.50
6.7.6.1 Test method for VSAT validation by the CCMF for VSAT using internal CC .50
6.7.6.2 Test method for VSAT validation by receiving station(s) for VSAT using internal CC.50
6.7.6.3 Test method for transmission validation for VSAT using external CC.50
6.7.7 Reception of commands from the CCMF .50
6.7.7.1 Test method.50
6.7.8 Power-on/Reset.50
6.7.8.1 Test method.50
6.8 Class B Control and Monitoring Functions.51
6.8.1 Test arrangement.51
6.8.2 Processor monitoring- Test method .52
6.8.3 Transmit subsystem monitoring-Test method.52
6.8.4 Power-on/Reset-Test method.53
6.8.5 Control Channel (CC) reception-Test method .53
6.8.6 Network Control commands-Test method.54
6.8.7 Initial burst transmission-Test method.56
7 Test methods for modified VSAT .56
7.1 General.56
7.2 Antenna subsystem replacement.57
Annex A (normative): The EN Requirements table (EN-RT).58
Annex B (informative): Pointing stability methodology .
...