CISPR 16-4-2:2011/AMD2:2018
(Amendment)Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
Amendement 2 - Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 4-2: Incertitudes, statistiques et modélisation des limites - Incertitudes de mesure de l'instrumentation
General Information
Relations
Buy Standard
Standards Content (Sample)
CISPR 16-4-2 ®
Edition 2.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
AMENDMENT 2
AMENDEMENT 2
Specification for radio disturbance and immunity measuring apparatus
and methods –
Part 4-2: Uncertainties, statistics and limit modelling – Measurement
instrumentation uncertainty
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques –
Partie 4-2: Incertitudes, statistiques et modélisation des limites – Incertitudes
de mesure de l’instrumentation
CISPR 16-4-2:2011-06/AMD2:2018-08(en-fr)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC -
Glossaire IEC - std.iec.ch/glossary
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC et en français, extraites des articles Termes et Définitions des
en utilisant différents critères (numéro de référence, texte, publications IEC parues depuis 2002. Plus certaines entrées
comité d’études,…). Elle donne aussi des informations sur les antérieures extraites des publications des CE 37, 77, 86 et
projets et les publications remplacées ou retirées. CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just Si vous désirez nous donner des commentaires sur cette
Published détaille les nouvelles publications parues. publication ou si vous avez des questions contactez-nous:
Disponible en ligne et aussi une fois par mois par email. sales@iec.ch.
CISPR 16-4-2 ®
Edition 2.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
BASIC EMC PUBLICATION
PUBLICATION FONDAMENTALE EN CEM
AMENDMENT 2
AMENDEMENT 2
Specification for radio disturbance and immunity measuring apparatus
and methods –
Part 4-2: Uncertainties, statistics and limit modelling – Measurement
instrumentation uncertainty
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques –
Partie 4-2: Incertitudes, statistiques et modélisation des limites – Incertitudes
de mesure de l’instrumentation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10; 33.100.20 ISBN 978-2-8322-5920-7
– 2 – CISPR 16-4-2:2011/AMD2:2018
© IEC 2018
FOREWORD
This amendment has been prepared by subcommittee CISPR subcommittee A: Radio-
interference measurements and statistical methods, of IEC CISPR committee: International
special committee on radio interference.
The text of this amendment is based on the following documents:
FDIS Report on voting
CISPR/A/1257/FDIS CISPR/A/1259/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
The contents of the corrigendum of January 2019 have been included in this copy.
_____________
2 Normative references
Replace the dated reference CISPR 16-2-3:2010, by the following new reference:
CISPR 16-2-3:2016, Specification for radio disturbance and immunity measuring apparatus
and methods – Part 2-3: Methods of measurement of disturbances and immunity – Radiated
disturbance measurements
3.1 Terms and definitions
Add, after the existing term and definition 3.1.1, the following new term and definition:
3.1.2
small EUT
equipment, either positioned on a table top or standing on the floor that, including its cables,
fits in a cylindrical test volume of 1,5 m in diameter and 1,5 m in height measured from the
floor
3.3 Abbreviations
Add, to the existing list modified by Amendment 1, the following new abbreviations:
© IEC 2018
AN artificial network
Δ-AN artificial Δ-network (‘Δ’ is pronounced ‘delta’)
LLAS large loop antenna system
LV low voltage
V-AMN artificial mains V-network
Table 1 – Values of U
cispr
Replace the first three lines of this table, modified by Amendment 1, by the following new
lines:
Conducted disturbance at AC mains and other power ports using a V-AMN (9 kHz to 150 kHz) 3,8 dB B.1
(150 kHz to 30 MHz) 3,4 dB B.2
Conducted disturbance at AC mains ports using a voltage probe (9 kHz to 30 MHz) 2,9 dB B.3
Add, after the measurement method “Conducted disturbance at telecommunication port using
CP”, the following new line:
Conducted disturbance at telecommunication port using CP and CVP (150 kHz to 30 MHz) 4,0 dB B.5
Add before “Radiated disturbance (electric field strength at an OATS or in a SAC)” the
following new line:
Radiated disturbance (disturbance current in a LLAS) (9 kHz to 30 MHz) 3,3 dB F.1
Add, after the existing NOTE 2, the following new notes:
NOTE 3 The value of U for conducted disturbances at telecommunication ports using CP and CVP is based on
cispr
the expanded uncertainty in Table B.5 with consideration of additional uncertainties attributed to the CP transfer
admittance Y and mismatch uncertainty CP-receiver δM; see comment B18).
T
NOTE 4 The values of U for the OATS, SAC and FAR are based on a small EUT – an EUT fitting in a
cispr
cylindrical test volume of 1,5 m in diameter and 1,5 m in height – for a 3 m measurement distance (per 3.1.2).
5.1 Conducted disturbance measurements at a mains port using an AMN
Replace, in the title, the phrase "an AMN" by the phrase "a V-AMN".
5.1.1 Measurand for measurements using an AMN
Replace, in the title, the phrase "an AMN" by the phrase "a V-AMN".
– 4 – CISPR 16-4-2:2011/AMD2:2018
© IEC 2018
5.1.2 Symbols of input quantities specific to measurements using an AMN
Replace in the title the phrase "an AMN" by the phrase "a V-AMN".
Replace the line starting with δD by the following new line:
mains
δD Correction for the error caused by AC mains and other power supply disturbances,
mains
in dB
5.1.3 Input quantities to be considered for conducted disturbance measurements at a
mains port using an AMN
Replace, in the title, the phrase "an AMN" by the phrase "a V-AMN".
Replace the eighth dashed item by the following new text:
– Effect of disturbances originating from the laboratory AC mains or other power supply
Add, after the existing Subclause 5.6.3 added by Amendment 1, the following new Subclause
5.7:
5.7 Conducted disturbance measurements at AC mains and other power ports using a
Δ-AN
5.7.1 Measurand for measurements using a Δ-AN
V Asymmetric voltage in dB(μV), measured at the EUT port of the Δ-AN relative to the
reference ground plane, and also symmetric voltage between two terminals at the
EUT port of the Δ-AN not including reference ground; optionally also the
unsymmetric voltage in dB(μV), measured at the EUT port of the Δ-AN relative to
the reference ground plane, if the Δ-AN is furnished with a respective port for
connection of the measuring receiver
5.7.2 Symbols of input quantities specific to measurements using a Δ-AN
F Voltage division factor (asymmetric resp. symmetric) of the Δ-AN, in dB
AN
δF Correction for voltage division factor (VDF) frequency interpolation error, in dB
AN f
δD Correction for the error caused by AC mains and other power supply disturbances,
mains
in dB
δV Correction for the effect of the environment, in dB
env
δZ Correction for imperfect asymmetric or symmetric Δ-AN impedance, in dB
AN
5.7.3 Input quantities to be considered for conducted disturbance measurements
at AC mains and other power ports using a Δ-AN
– Receiver reading
– Attenuation of the connection between AN and receiver
– AN voltage division factor (asymmetric and symmetric)
– AN VDF frequency interpolation
– Receiver related input quantities:
• Receiver sine-wave voltage accuracy
• Receiver pulse amplitude response
© IEC 2018
• Receiver pulse response variation with repetition frequency
• Receiver noise floor
– Mismatch effects between the AN's receiver port and receiver
– AN impedance
– Effect of disturbances originating from the laboratory AC mains or other power supply
– Effect of environment
Add, after the existing Clause 8, the following new Clause 9:
9 Radiated disturbance measurements in the frequency range 9 kHz to 30 MHz
9.1 Magnetic field disturbance measurements using the LLAS in the frequency range
9 kHz to 30 MHz (see also Clause F.1)
9.1.1 Measurand for LLAS measurements
I Current in dB(µA), measured in each of the three loops of the LLAS
9.1.2 Symbols of input quantities specific for LLAS measurements
δZ
vf
Correction for validation factor deviation, in dB
δZ
fi
Correction for validation factor frequency interpolation, in dB
9.1.3 Input quantities to be considered for LLAS measurements
– Receiver reading
– Attenuation of connecting cable between LLAS and receiver
– Validation factor deviation
– Validation factor frequency interpolation
– Receiver related input quantities:
• Receiver sine-wave voltage accuracy
• Receiver pulse amplitude response
• Receiver pulse response variation with repetition frequency
• Receiver noise floor
– Misma
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.