Coaxial communication cables - Part 4-1: Blank detail specification for radiating cables

IEC 61196-4-1:2022 applies to radiating coaxial communication cables. These cables are intended for use in wireless communication system in long, narrow, semi-closed and indoor environment, such as tunnels, railways, highways, subways, elevators and other installations. This second edition cancels and replaces the first edition published in 2016. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a. rewrote "1 Scope" to be consistent with other blank detail specifications of coaxial cables;
b. added detail construction requirements of inner and outer conductor in "[7] Cable construction";
c. added "Storage temperature range", "Installation temperature range" and "Stop frequency band" in "[8] Engineering information (reference only)";
d. added "8.2.11 Link loss", "8.4.9 Adhesion of dielectric", "8.4.10 Shrinkage for insulations", "8.4.11 Maximum pulling force of cable";
e. added different detail requirements or typical values in 8.2.4, 8.2.6 to 8.2.8, 8.3.1 to 8.3.4, 8.4.1, 8.4.3 to 8.4.8;
f. deleted "7.4.4 Ovality of outer conductor".

Câbles coaxiaux de communication - Partie 4-1: Spécification particulière-cadre pour câbles rayonnants

L'IEC 61196-4-1:2022 s’applique aux câbles de communication coaxiaux rayonnants. Ces câbles sont conçus pour être utilisés dans les systèmes de communication sans fil des environnements longs, étroits, semi-fermés et intérieurs, tels que les tunnels, les lignes ferroviaires, les autoroutes, les souterrains, les élévateurs et autres installations. Cette deuxième édition annule et remplace la première édition parue en 2016. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a. réécriture de "1 Domaine d’application" pour assurer la cohérence avec les autres spécifications particulières-cadres des câbles coaxiaux;
b. ajout d’exigences détaillées concernant la construction des conducteurs intérieur et extérieur en "[7] Construction du câble";
c. ajout de "Plage de températures de stockage", "plage de températures d’installation" et "Bande de fréquences d’arrêt" en "[8] Informations techniques (référence uniquement)";
d. ajout de "8.2.11 Perte de liaison", "8.4.9 Adhérence du diélectrique", "8.4.10 Rétraction des enveloppes isolantes", "8.4.11 Force de traction maximale du câble";
e. ajout de différentes exigences détaillées ou de valeurs types en 8.2.4, 8.2.6 à 8.2.8, 8.3.1 à 8.3.4, 8.4.1, 8.4.3 à 8.4.8;
f. suppression de "7.4.4 Ovalité du conducteur extérieur".

General Information

Status
Published
Publication Date
12-Sep-2022
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
07-Oct-2022
Completion Date
13-Sep-2022
Ref Project

Relations

Buy Standard

Standard
IEC 61196-4-1:2022 RLV - Coaxial communication cables - Part 4-1: Blank detail specification for radiating cables Released:9/13/2022
English language
33 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61196-4-1:2022 - Coaxial communication cables - Part 4-1: Blank detail specification for radiating cables Released:9/13/2022 Isbn:9782832256503
English and French language
20 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61196-4-1 ®
Edition 2.0 2022-09
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Coaxial communication cables –
Part 4-1: Blank detail specification for radiating cables

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 61196-4-1 ®
Edition 2.0 2022-09
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Coaxial communication cables –
Part 4-1: Blank detail specification for radiating cables
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.120.10 ISBN 978-2-8322-5712-8
– 2 – IEC 61196-4-1:2022 RLV © IEC 2022
CONTENTS
FOREWORD . 3
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Guidance for the preparation of detail specifications . 6
5 Blank detail specification . 7

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COAXIAL COMMUNICATION CABLES –

Part 4-1: Blank detail specification for radiating cables

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
This redline version of the official IEC Standard allows the user to identify the changes made to
the previous edition IEC 61196-4-1:2016. A vertical bar appears in the margin wherever a change
has been made. Additions are in green text, deletions are in strikethrough red text.

– 4 – IEC 61196-4-1:2022 RLV © IEC 2022
IEC 61196-4-1 has been prepared by subcommittee 46A: Coaxial cables, of IEC technical
committee 46: Cables, wires, waveguides, RF connectors, RF and microwave passive
components and accessories. It is an International Standard.
This second edition cancels and replaces the first edition published in 2016. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) rewrote "1 Scope" to be consistent with other blank detail specifications of coaxial cables;
b) added detail construction requirements of inner and outer conductor in "[7] Cable
construction";
c) added "Storage temperature range", "Installation temperature range" and "Stop frequency
band" in "[8] Engineering information (reference only)";
d) added "8.2.11 Link loss", "8.4.9 Adhesion of dielectric", "8.4.10 Shrinkage for insulations",
"8.4.11 Maximum pulling force of cable";
e) added different detail requirements or typical values in 8.2.4, 8.2.6 to 8.2.8, 8.3.1 to 8.3.4,
8.4.1, 8.4.3 to 8.4.8;
f) deleted "7.4.4 Ovality of outer conductor".
The text of this International Standard is based on the following documents:
Draft Report on voting
46A/1584/FDIS 46A/1599/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
This part of IEC 61196 is to be read in conjunction with IEC 61196-1:2005 and IEC 61196-4:—
.
A list of all parts in the IEC 61196 series, published under the general title Coaxial
communication cables, can be found on the IEC website.

___________
Under preparation. Stage at the time of publication: IEC 61196-4/FDIS:2022.

The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.

– 6 – IEC 61196-4-1:2022 RLV © IEC 2022
COAXIAL COMMUNICATION CABLES –

Part 4-1: Blank detail specification for radiating cables

1 Scope
This part of IEC 61196, which is a blank detail specification, applies to radiating coaxial
communication cables. These cables are intended for use in wireless communication system in
long, narrow, semi-closed and indoor environment, such as tunnels, railways, highways,
subways, elevators and other installations in which conventional radio transmission is not
satisfactory or even impossible.
It determines the layout and style for detail specifications. Detail specifications, based on the
blank detail specification, may can be prepared by a national organization, a manufacturer, or
a user.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 61196-1:2005, Coaxial communication cables – Part 1: Generic specification: General,
definitions and requirements
IEC 61196-1-124 , Coaxial communication cables – Part 1-124: Electrical test methods – Test
for coupling loss of radiating cable
IEC 61196-4:2015 , Coaxial communication cables – Part 4 Sectional specification for radiating
cables
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Guidance for the preparation of detail specifications
The detail specification shall be written in accordance with the layout of the blank detail
specification, which forms part of this document.
___________
Under preparation. Stage at the time of publication: IEC/FDIS 61196-1-124:2022.
Under preparation. Stage at the time of publication: IEC/FDIS 61196-4:2022.

When a characteristic does not apply, then NA (for not applicable) should be is entered in the
appropriate space.
NOTE 1 When a characteristic applies but a specific value is not considered necessary, then NS (for not specified)
is entered.
The numbers shown in square brackets in this and the following pages correspond to the
following items of required information, which should be entered in the space provided.
[1] Name and address of the organization that has prepared the document
[2] IEC document number and date of issue
[3] Address of the organization from which the document is available
[4] Related documents
[5] Any other references to the cable, national reference, trade name, etc.
[6] Complete description of the cable
[7] Cable construction
[8] Engineering information
[9] Parameter or characteristic
[10] Reference to the relevant subclause of the sectional specification IEC 61196-4
[11] Minimum requirements of the sectional specification IEC 61196-4
[12] Remarks
5 Blank detail specification
Title
[2] Document No.:
[1] Prepared by:
Issue:
Date:
Date:
[3] Available from: [4] Generic specification IEC 61196-1
Sectional specification IEC 61196-4
[5] Additional references:
IEC 61196-1-1XX, IEC 61196-1-2XX, IEC 61196-1-3XX
[6] Cable description:
a) Cable variant
b) Material of inner conductor

c) Material of dielectric
d) Outer conductor
e) Material of sheath (if any)
[7] Cable construction
a) Inner conductor
Material
Diameter (mm) nominal
Tolerance (mm): ±…
– 8 – IEC 61196-4-1:2022 RLV © IEC 2022
Title
Construction:
For corrugated inner conductor:
– Peak diameter and tolerance (mm):
– Root diameter and tolerance (mm):
– Pitch and tolerance (mm):
For smooth inner conductor:
– Diameter and thickness and tolerance (mm):
For others:
– Diameter and tolerance (mm):
b) Dielectric
Material
Diameter (mm) nominal
Tolerance (mm): ±…
c) Outer conductor
...


IEC 61196-4-1 ®
Edition 2.0 2022-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Coaxial communication cables –
Part 4-1: Blank detail specification for radiating cables

Câbles coaxiaux de communication –
Partie 4-1: Spécification particulière-cadre pour câbles rayonnants

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 300 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 19 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.

Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC Products & Services Portal - products.iec.ch

IEC 61196-4-1 ®
Edition 2.0 2022-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Coaxial communication cables –

Part 4-1: Blank detail specification for radiating cables

Câbles coaxiaux de communication –

Partie 4-1: Spécification particulière-cadre pour câbles rayonnants

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.10 ISBN 978-2-8322-5650-3

– 2 – IEC 61196-4-1:2022 © IEC 2022
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Guidance for the preparation of detail specifications . 5
5 Blank detail specification . 6

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COAXIAL COMMUNICATION CABLES –

Part 4-1: Blank detail specification for radiating cables

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 61196-4-1 has been prepared by subcommittee 46A: Coaxial cables, of IEC technical
committee 46: Cables, wires, waveguides, RF connectors, RF and microwave passive
components and accessories. It is an International Standard.
This second edition cancels and replaces the first edition published in 2016. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) rewrote "1 Scope" to be consistent with other blank detail specifications of coaxial cables;
b) added detail construction requirements of inner and outer conductor in "[7] Cable
construction";
c) added "Storage temperature range", "Installation temperature range" and "Stop frequency
band" in "[8] Engineering information (reference only)";
d) added "8.2.11 Link loss", "8.4.9 Adhesion of dielectric", "8.4.10 Shrinkage for insulations",
"8.4.11 Maximum pulling force of cable";

– 4 – IEC 61196-4-1:2022 © IEC 2022
e) added different detail requirements or typical values in 8.2.4, 8.2.6 to 8.2.8, 8.3.1 to 8.3.4,
8.4.1, 8.4.3 to 8.4.8;
f) deleted "7.4.4 Ovality of outer conductor".
The text of this International Standard is based on the following documents:
Draft Report on voting
46A/1584/FDIS 46A/1599/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
This part of IEC 61196 is to be read in conjunction with IEC 61196-1:2005 and IEC 61196-4:—
.
A list of all parts in the IEC 61196 series, published under the general title Coaxial
communication cables, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
Under preparation. Stage at the time of publication: IEC 61196-4/FDIS:2022.

COAXIAL COMMUNICATION CABLES –

Part 4-1: Blank detail specification for radiating cables

1 Scope
This part of IEC 61196 applies to radiating coaxial communication cables. These cables are
intended for use in wireless communication system in long, narrow, semi-closed and indoor
environment, such as tunnels, railways, highways, subways, elevators and other installations.
It determines the layout and style for detail specifications. Detail specifications, based on the
blank detail specification, can be prepared by a national organization, a manufacturer, or a user.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 61196-1:2005, Coaxial communication cables – Part 1: Generic specification: General,
definitions and requirements
IEC 61196-1-124 , Coaxial communication cables – Part 1-124: Electrical test methods – Test
for coupling loss of radiating cable
IEC 61196-4: , Coaxial communication cables – Part 4 Sectional specification for radiating
cables
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Guidance for the preparation of detail specifications
The detail specification shall be written in accordance with the layout of the blank detail
specification, which forms part of this document.
When a characteristic does not apply, then NA (for not applicable) is entered in the appropriate
space.
___________
Under preparation. Stage at the time of publication: IEC/FDIS 61196-1-124:2022.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.