IEC 61158-5:2003
(Main)Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
This part of IEC 61158 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the three-layer fieldbus Reference Model, which is based in part on the Basic Reference Model for Open Systems Interconnection. Both Reference Models subdivide the area of standardization for interconnection into a series of layers of specification, each of manageable size. The Application Service is provided by the Application Protocol making use of the services available from the Data Link or other immediately lower layer. This part of the IEC 61158 series defines the Application Service characteristics that any immediately higher-level protocols may exploit. The contents of the corrigendum of July 2004 have been included in this copy.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL IEC
STANDARD
61158-5
Third edition
2003-05
Digital data communications
for measurement and control –
Fieldbus for use in industrial
control systems –
Part 5:
Application layer service definition
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (http://www.iec.ch/searchpub/cur_fut.htm)
enables you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (http://www.iec.ch/online_news/
justpub/jp_entry.htm) is also available by email. Please contact the Customer
Service Centre (see below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD 61158-5
Third edition
2003-05
Digital data communications
for measurement and control –
Fieldbus for use in industrial
control systems –
Part 5:
Application layer service definition
© IEC 2003 – Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
XH
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue
– 2 – 61158-5 IEC:2003(E)
CONTENTS
FOREWORD.24
0 Introduction.26
0.1 General .26
0.2 Nomenclature for references within this standard .26
1 Scope .27
2 Normative references.27
3 Terms and definitions.28
3.1 ISO/IEC 7498-1 terms .28
3.2 ISO/IEC 8822 terms .29
3.3 ISO/IEC 9545 terms .29
3.4 ISO/IEC 8824 terms .29
3.5 Fieldbus Data Link Layer terms .29
3.6 Fieldbus Application Layer specific definitions .30
3.7 Abbreviations and symbols .41
3.8 Conventions .42
4 Concepts .45
4.1 Overview .45
4.2 Architectural relationships .46
4.3 Fieldbus Application Layer structure.48
4.4 Fieldbus Application Layer naming and addressing .60
4.5 Architecture summary.60
4.6 FAL service procedures.61
4.7 Common FAL attributes .62
4.8 Common FAL service parameters.62
4.9 APDU size.63
5 Data type ASE .63
5.1 General .63
5.2 Formal definition of data type objects .66
5.3 FAL defined data types.67
5.4 Data type ASE service specification .102
6 Type 1 communication model specification.102
6.1 Concepts.102
6.2 ASEs .102
6.3 ARs .246
6.4 Summary of FAL classes .270
6.5 Permitted FAL services by AREP role.271
7 Type 2 communication model specification.273
7.1 Concepts.273
7.2 ASEs .281
7.3 AR.346
7.4 Summary of FAL classes .382
7.5 Permitted FAL services by AR type .383
8 Type 3 communication model specification.383
61158-5 IEC:2003(E) – 3 –
8.1 DP concepts.383
8.2 ASEs .401
8.3 Summary of AL classes .734
8.4 Permitted AL services by AREP role.735
8.5 Conformance classes .739
8.6 Application characteristics .739
9 Type 4 communication model specification.740
9.1 Concepts.740
9.2 Variable ASE.747
9.3 Application relationship ASE.766
10 Type 5 communication model specification.772
10.1 Concepts.772
10.2 ASEs .793
10.3 FDA sessions .828
10.4 Summary of FAL Type 9 and Type 5 classes .837
10.5 Permitted FAL Type 9 and Type 5 services by AREP role.838
11 Type 6 communication model specification.840
11.1 Application relationship (AR) and Application relationship endpoint (AREP)
characteristics .840
11.2 Relationship of Type 6 to Type 1 .842
11.3 Permitted services by AREP role .846
12 Type 7 communication model specification.848
12.1 Concepts.848
12.2 ASEs .864
12.3 ARs . 1033
13 Type 8 communication model specification. 1053
13.1 Concepts. 1053
13.2 ASEs . 1055
13.3 Application relationships. 1070
13.4 Permitted FAL services by AREP role. 1071
14 Type 9 communication model specification. 1072
14.1 Concepts. 1072
14.2 Common parameters . 1072
14.3 ASEs . 1073
14.4 ARs . 1163
14.5 Summary of classes . 1166
14.6 Permitted services by AREP role . 1166
15 Type 10 communication model specification. 1168
15.1 Type 10 Concepts . 1168
15.2 ASE Data Types . 1174
15.3 ASEs . 1175
15.4 ARs . 1289
15.5 Summary of FAL classes . 1292
15.6 Summary of FAL services. 1292
– 4 – 61158-5 IEC:2003(E)
Figure 1 – Relationship of IEC 61158-3 to other fieldbus layers and to users of the fieldbus
Application Service .26
Figure 2 – Relationship to the OSI basic reference model.46
Figure 3 – Architectural positioning of the fieldbus Application Layer .47
Figure 4 – Client/server interactions .49
Figure 5 – Pull model interactions.50
Figure 6 – Push model interactions .51
Figure 7 – APOs services conveyed by the FAL.52
Figure 8 – Application entit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.