IEC TS 62565-5-1:2023

Nanomanufacturing - Product specifications - Part 5-1: Nanoporous activated carbon - Blank detail specification: Electrochemical capacitors

IEC TS 62565-5-1:2023, which is a Technical Specification, establishes a blank detail specification (BDS) for nanoporous activated carbon used for electrochemical capacitors.
Numeric values for the key control characteristics are left blank as they will be specified between customer and supplier in the detail specification (DS). In the DS key control characteristics can be added or removed if agreed between customer and supplier.

General Information

• Status: Published
• Publication Date: 06-Jun-2023
• ICS: 07.120 - Nanotechnologies
• Technical Committee: TC 113 - Nanotechnology for electrotechnical products and systems
• Drafting Committee: WG 11 - TC 113/WG 11
• Current Stage: PPUB - Publication issued
• Start Date: 11-Jul-2023
• Completion Date: 07-Jun-2023

Standards Content (Sample)

IEC TS 62565-5-1 ®
Edition 1.0 2023-06
TECHNICAL
SPECIFICATION
colour
inside
Nanomanufacturing – Product specifications –
Part 5-1: Nanoporous activated carbon – Blank detail specification:
Electrochemical capacitors
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].
IEC TS 62565-5-1 ®
Edition 1.0 2023-06
TECHNICAL
SPECIFICATION
colour
inside
Nanomanufacturing – Product specifications –

Part 5-1: Nanoporous activated carbon – Blank detail specification:

Electrochemical capacitors
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 07.120 ISBN 978-2-8322-7096-7

– 2 – IEC TS 62565-5-1:2023 © IEC 2023
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviated terms . 9
3.1 General terms . 9
3.2 Terms related to the nanoporous activated carbon . 12
3.3 Chemical key control characteristics . 13
3.4 Physical key control characteristic . 14
3.5 Structural key control characteristics . 15
3.6 Electrochemical key control characteristics . 16
3.7 Measurement methods . 17
3.8 Symbols and abbreviated terms . 17
4 General introduction regarding measurement methods . 18
5 Recommended nanoporous activated carbon specification format . 19
5.1 General product description and procurement information . 19
5.2 Chemical key control characteristics . 19
5.3 Physical key control characteristics . 20
5.4 Structural key control characteristics . 21
5.5 Electrochemical key control characteristics . 21
6 Overview of test methods . 22
Annex A (normative) Supporting information for standardized KCC measurement
procedures. 26
A.1 General . 26
A.2 Water content: Karl Fischer . 26
A.2.1 General . 26
A.2.2 Measurement standard . 26
A.3 Water content: Drying loss . 26
A.3.1 General . 26
A.3.2 Measurement standard . 26
A.4 Ash content: Incineration . 27
A.4.1 General . 27
A.4.2 Measurement standard . 27
A.5 Metallic impurities: ICP-MS . 27
A.5.1 General . 27
A.5.2 Measurement standard . 27
A.5.3 Adaptations and modifications required . 27
A.6 Metallic impurities: ICP-OES . 27
A.6.1 General . 27
A.6.2 Measurement standard . 27
A.6.3 Adaptations and modifications required . 27
A.7 Anion impurities: Ion chromatography . 28
A.7.1 General . 28
A.7.2 Measurement standard . 28
A.8 Elemental content: Elemental analyser . 28
A.8.1 General . 28

A.8.2 Measurement standard . 28
A.8.3 Adaptations and modifications required . 28
A.9 Elemental content: CS analyser, ONH analyser . 28
A.9.1 General . 28
A.9.2 Measurement standard . 29
A.9.3 Adaptations and modifications required . 29
A.10 Oxygen functional groups: Boehm titration . 29
A.10.1 General . 29
A.10.2 Measurement standard . 29
A.10.3 Adaptations and modifications required . 29
A.11 Oxygen functional groups: XPS . 30
A.11.1 General . 30
A.11.2 Measurement standard . 30
A.11.3 Adaptations and modifications required . 30
A.12 Particle size distribution: Laser diffraction method . 30
A.12.1 General . 30
A.12.2 Measurement standard . 30
A.13 Tap density: Tapping method . 30
A.13.1 General . 30
A.13.2 Measurement standard . 30
A.14 pH value: pH meter . 31
A.14.1 General . 31
A.14.2 Measurement standard . 31
A.15 Circularity: Static image analysis method . 31
A.15.1 General . 31
A.15.2 Measurement standard . 31
A.15.3 Adaptations and modifications required . 31
A.16 Circularity: Dynamic image analysis method . 31
A.16.1 General . 31
A.16.2 Measurement standard . 31
A.16.3 Adaptations and modifications required . 31
A.17 Circularity: SEM . 31
A.17.1 General . 31
A.17.2 Measurement standard . 32
A.17.3 Adaptations and modifications required . 32
A.18 Apparent density: Funnel method . 32
A.18.1 General . 32
A.18.2 Measurement standard . 32
A.19 Volume resistivity: Four probe method . 32
A.19.1 General . 32
A.19.2 Measurement standard . 32
A.20 Specific surface area: Gas adsorption . 32
A.20.1 General . 32
A.20.2 Measurement standard . 33
A.20.3 Adaptations and modifications required . 33
A.21 Pore volume: Gas adsorption . 33
A.21.1 General . 33
A.21.2 Measurement standard . 33
A.22 Pore size distribution: Gas adsorption . 33

– 4 – IEC TS 62565-5-1:2023 © IEC 2023
A.22.1 General . 33
A.22.2 Measurement standard .
...