IEC 60838-2-3:2016/AMD1:2023

Amendment 1 - Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps

Amendement 1 - Douilles diverses pour lampes - Partie 2-3: Exigences particulières - Douilles pour lampes LED linéaires à deux culots

General Information

• Status: Published
• Publication Date: 23-Apr-2023
• ICS: 29.140.10 - Lamp caps and holders
• Technical Committee: SC 34B - Lamp caps and holders
• Drafting Committee: WG 1 - TC 34/SC 34B/WG 1
• Current Stage: PPUB - Publication issued
• Start Date: 29-May-2023
• Completion Date: 24-Apr-2023

Relations

• Amends: IEC 60838-2-3:2016 - Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60838-2-3
®

Edition 1.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1

Miscellaneous lampholders –
Part 2-3: Particular requirements – Lampholders for double-capped linear LED
lamps

Douilles diverses pour lampes –
Partie 2-3: Exigences particulières – Douilles pour lampes LED linéaires à deux
culots

IEC 60838-2-3:2016-05/AMD1:2023-04(en-fr)

---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2023 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.


Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland

About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].


A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 300 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 19 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].

---------------------- Page: 2 ----------------------
IEC 60838-2-3

®


Edition 1.0 2023-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




AMENDMENT 1

AMENDEMENT 1





Miscellaneous lampholders –

Part 2-3: Particular requirements – Lampholders for double-capped linear LED

lamps




Douilles diverses pour lampes –

Partie 2-3: Exigences particulières – Douilles pour lampes LED linéaires à deux


culots













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.140.10 ISBN 978-2-8322-6859-9




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 3 ----------------------
– 2 – IEC 60838-2-3:2016/AMD1:2023
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

MISCELLANEOUS LAMPHOLDERS –

Part 2-3: Particular requirements –
Lampholders for double-capped linear LED lamps

AMENDMENT 1

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60838-2-3:2016 has been prepared by subcommittee 34B: Lamp caps and
holders, of IEC technical committee 34: Lighting.
The text of this Amendment is based on the following documents:
Draft Report on voting
34B/2150/CDV 34B/2167/RVC

Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.

---------------------- Page: 4 ----------------------
IEC 60838-2-3:2016/AMD1:2023 – 3 –
© IEC 2023
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

_____________

5 General conditions for tests
5.1
Add the following title to Subclause 5.1:
5.1 GX16t-5 lampholders
Add, at the end of Subclause 5.1, after Figure 3, the following new Subclause 5.2:
5.2 GJ6.6 lampholders
For a pair of GJ6.6 inflexible lampholders, the axial tolerances shall conform to IEC 60061-2,
sheet 7005-188-1 (Mounting distance of a combined pair of inflexible lampholders).
NOTE GJ6.6 lampholders are classified as inflexible (see 3.3).
8 Protection against electric shock
8.1
Add the following title to Subclause 8.1:
8.1 GX16t-5 contact making during insertion
Add, after Subclause 8.1, the following new Subclause 8.2:
8.2 GJ6.6 contact making during insertion
GJ6.6t, GJ6.6d-1 and GJ6.6d-2 lampholders shall provide protection against electric shock
during the lamp insertion to the holder.
Compliance is checked by measurement or by using the contact making test gauge for holders
specified in IEC 60061-3, sheet 7006-188-X.
NOTE 1 GJ6.6 lamps are inserted by snapping into the lampholder. The orientation is mechanically ensured prior
to making electrical contact. Mechanical protection against electric shock is provided by inaccessible electrical
contacts.

---------------------- Page: 5 ----------------------
– 4 – IEC 60838-2-3:2016/AMD1:2023
© IEC 2023
NOTE 2 The IEC 60061-3 gauges for GJ6.6 fits are under development.
11 Construction
11.1
Add the following title to Subclause 11.1:
11.1 Absence of lamp support
At the end of Subclause 11.1, number the existing NOTE as NOTE 1 and add the following new
NOTE 2:
NOTE 2 GJ6.6 lampholders provide additional lamp support inherently by incorporating a closure of the holder to
the lamp cap. The lampholder is side entry from the lamp axis perspective but the cap pins are axial entry into the
holder.
11.2
Add the following title to Subclause 11.2:
11.2 Seating position
11.3
Replace the existing Subclause 11.3 with the following new titled Subclause 11.3:
11.3 Contact force
11.3.1 Gx16t-5 lampholders
Lampholders shall be so designed that adequate contact force is provided.
a) For bi-pin lampholders, making contact mainly along one side of each pin of the cap, the
contact force is measured with a single-ended gauge having dimensions and pin distances
according to standard sheet 7006-183C of IEC 60061-3, gauges E and G.
The contact force shall be between:
– 2 N and 30 N for lampholders not providing support to prevent bending of the lamp pins;
– 2 N and 45 N for lampholders, when the lamp pins are supported by the holder
construction.
First the maximum contact force is measured with a pin distance as shown for gauge G.
This is followed by measurement of the minimum contact force with the pin distance of
gauge E.
b) For single-pin lampholders the contact force is measured with a single-ended gauge having
dimensions according to standard sheet 7006-183C of IEC 60061-3, gauges E and G.
The contact force shall be between 2 N and 25 N.
c) For bi-pin lampholders the torque required for the insertion and removal of the lamp shall
be measured with single-ended gauges having pin dimensions and pin distances according
to standard sheet 7006-183C of IEC 60061-3 gauges G and F.
The torque required to insert the gauges until the position representing the operating
position of the lamp is reached, shall not exceed 0,5 Nm.
The torque required to clear the gauges from the normal seated position shall be between
0,1 Nm and 0,5 Nm.
During complete removal of the gauges, the maximum values shall not be exceeded.
During force and torque testing, care should be taken that the front face of the gauges is
kept parallel with the holder face.

---------------------- Page: 6 ----------------------
IEC 60838-2-3:2016/AMD1:2023 – 5 –
© IEC 2023
As a preconditioning cycle, there shall be one clockwise and one anticlockwise rotation, or
one insertion and withdrawal routine of each test device, before the initial measurement is
taken.
11.3.2 GJ6.6 lampholders
Lampholders shall be so designed that adequate contact force is provided.
Adequate contact force is tested for GJ6.6 lampholders by two gauges:
• retention force gauge for GJ6.6 lampholders;
• contact making test gauge for GJ6.6 holders.
Compliance is checked by measurement or passing both of the following IEC 60061-3 gauge
test procedures:
• gauge sheet 7006-188-X, retention force gauge for GJ6.6 lampholders;
• gauge sheet 7006-188-X, contact making test gauge for GJ6.6 holders.
NOTE The IEC 60061-3 gauges for GJ6.6 fits are under development.
11.4
Replace the existing Subclause 11.4, including Figure 4, with the following new titled Subclause
11.4 and Figure 4:
11.4 Holder dimensions
11.4.1 General
Lampholders shall comply with the relevant standard sheets of IEC 60061-2 with regard to the
holder dimensions.
11.4.2 GX16t-5 lampholders
Compliance is checked as follows:
– With two pairs of matching holders mounted in the mounting jig shown in Figure 4 and by
use of the relevant "GO" gauges and the relevant gauges for testing contact-making.
– Lampholders which, due to their design, do not allow testing in the mounting jig, and flexibly
mounted lampholders (see 3.4) shall be tested together with the relevant luminaire and by
use of the relevant gauges adapted to the specific lamp length according to standard sheet
7005-183 of IEC 60061-2.
When testing contact-making, the gauges are pushed in the direction of each of the holder faces
in turn with a force of 10 N. For holders with a limited mass of 500 g for the lamp, the force is
limited to 5 N.
When testing in the mounting jig, this force can be achieved by vertical position of the gauge.
For lampholders intended for use with more than one lamp at the same time, additional mass
according to the number of lamps is placed on the lampho
...