IEC 60092-306:2022

Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories

IEC 60092-306:2022 applies to luminaires and lighting accessories for use in ships. It applies primarily to luminaires for illumination purposes. This document also applies to lighting accessories associated with the wiring and current consuming appliance of an installation. This document does not apply to portable luminaires, navigation lights, search lights, daylight signalling lamps, signal lights including the relevant control and monitoring equipment and other lights used for navigation in channels, harbours, etc. Annex A provides EMC considerations for system integrators.

General Information

• Status: Published
• Publication Date: 12-Oct-2022
• ICS: 47.020.60 - Electrical equipment of ships and of marine structures
• Technical Committee: TC 18 - Electrical installations of ships and of mobile and fixed offshore units
• Drafting Committee: MT 6 - TC 18/MT 6
• Current Stage: PPUB - Publication issued
• Start Date: 11-Nov-2022
• Completion Date: 13-Oct-2022

Relations

• Revises: IEC 60092-306:2009 - Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60092-306 ®
Edition 5.0 2022-10
INTERNATIONAL
STANDARD
Electrical installations in ships –
Part 306: Equipment – Luminaires and lighting accessories
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 60092-306 ®
Edition 5.0 2022-10
INTERNATIONAL
STANDARD
Electrical installations in ships –

Part 306: Equipment – Luminaires and lighting accessories

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 47.020.60 ISBN 978-2-8322-5848-4

– 2 – IEC 60092-306:2022 © IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 9
4 Requirements on luminaires . 10
4.1 General . 10
4.2 Mechanical requirements . 10
4.2.1 Design . 10
4.2.2 Materials . 11
4.3 Electrical requirements . 11
4.3.1 Electrical safety . 11
4.3.2 Distribution systems . 11
4.3.3 Electromagnetic compatibility . 11
4.4 Photometric data . 11
4.5 Environmental conditions . 12
4.5.1 General . 12
4.5.2 Design parameters . 12
4.6 Discharge lamp luminaires . 12
4.6.1 General . 12
4.6.2 Special requirements . 12
4.7 Component parts . 13
4.8 Cables . 13
4.9 Lampholders . 13
4.10 Marking . 14
5 Requirements on lighting accessories . 15
5.1 General . 15
5.2 Materials . 15
5.2.1 Enclosures . 15
5.2.2 Ceiling roses . 15
5.3 Automated lighting controllers . 15
6 Socket-outlets and plugs for the luminaires' connection . 16
7 Tests . 16
7.1 General . 16
7.2 Design parameters . 16
7.2.1 Climatic exposure, operation . 16
7.2.2 Climatic exposure, storage . 17
7.2.3 Special chemical and physical attributes . 17
7.3 Electrical tests . 18
7.3.1 High voltage test . 18
7.3.2 Insulation resistance test . 18
8 Packaging and marking . 19
Annex A (informative) EMC considerations for system integrators . 20
A.1 General . 20
A.2 Background. 20

A.3 Immunity requirements . 20
A.4 Emission requirements . 20
A.5 Harmonic distortion . 21
Bibliography . 22

Figure 1 – Warning symbol for discharge lamp installations . 12

Table 1 – Special requirements on component parts . 13
Table 2 – Standard types of lampholders . 13
Table 3 – Climatic conditions, operation . 17
Table 4 – Climatic conditions, storage . 17
Table 5 – Special chemical and physical attributes . 18
Table 6 – High voltage test . 18
Table 7 – Insulation resistance test . 19

– 4 – IEC 60092-306:2022 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS IN SHIPS –

Part 306: Equipment – Luminaires and lighting accessories

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60092-306 has been prepared by IEC technical committee 18: Electrical installations of
ships and of mobile and fixed offshore units. It is an International Standard.
This fifth edition cancels and replaces the fourth edition published in 2009. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) additional technical and environmental requirements have been included;
b) Table 2 "Standard types of lamp holders" has been amended;
c) Subclause 4.3.2 has been amended with a new title "Distribution systems" and a reference
to IEC 60092-201 has been added;
d) environmental requirements and tests, especially regarding shock and vibration have been
changed, and references to IEC 60092-101 and IEC 60092-504 have been added;
e) requirements on coating thickness have been deleted, material requirements in 4.2.2 being
sufficient;
...

IEC 60092-306 ®
Edition 5.0 2022-10
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Electrical installations in ships –
Part 306: Equipment – Luminaires and lighting accessories

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 60092-306 ®
Edition 5.0 2022-10
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Electrical installations in ships –
Part 306: Equipment – Luminaires and lighting accessories
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 47.020.60 ISBN 978-2-8322-5887-3

– 2 – IEC 60092-306:2022 RLV © IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 2
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 10
4 Requirements on luminaires . 11
4.1 General . 11
4.2 Mechanical requirements . 11
4.2.1 Design . 11
4.2.2 Materials . 11
4.3 Electrical requirements . 12
4.3.1 Electrical safety . 12
4.3.2 Luminaires for use on IT power Distribution systems . 12
4.3.3 Electromagnetic compatibility . 12
4.4 Illumination technology Photometric data . 12
4.5 Environmental conditions . 13
4.5.1 General . 13
4.5.2 Design parameters . 13
4.6 Discharge lamp luminaires . 13
4.6.1 General . 13
4.6.2 Special requirements on discharge lamp luminaires . 13
4.7 Component parts . 14
4.8 Cables . 14
4.9 Lampholders . 14
4.10 Marking . 16
5 Requirements on lighting accessories . 16
5.1 General . 16
5.2 Materials . 16
5.2.1 Enclosures . 16
5.2.2 Ceiling roses . 17
5.3 Automated lighting controllers . 17
6 Requirements on Socket-outlets and plugs for the luminaires' connection . 17
7 Tests . 17
7.1 General . 17
7.2 Environmental tests .
7.2.1 Vibration exposure .
7.2.2 Shock exposure .
7.2 Design parameters . 19
7.2.1 Climatic exposure, operation . 19
7.2.2 Storage during Climatic exposure, storage. 19
7.2.3 Special chemical and physical attributes . 19
7.3 Electrical tests . 20
7.3.1 High voltage test . 20
7.3.2 Insulation resistance test . 20
7.4 Coating thickness .

8 Packaging and marking . 21
Annex A (informative) EMC considerations for system integrators . 22
A.1 General . 22
A.2 Background. 22
A.3 Immunity requirements . 22
A.4 Emission requirements . 22
A.5 Harmonic distortion . 23
Bibliography . 24

Figure 1 – Warning symbol for discharge lamp installations . 14

Table 1 – Special requirements on component parts . 14
Table 2 – Standard types of lampholders . 15
Table 3 – Vibration exposure .
Table 4 – Shock exposure .
Table 3 – Climatic conditions, operation . 19
Table 4 – Exposure to Climatic conditions, storage . 19
Table 5 – Special chemical and physical attributes of non-metallic materials . 20
Table 6 – High voltage test . 20
Table 7 – Insulation resistance test . 21

– 4 – IEC 60092-306:2022 RLV © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS IN SHIPS –

Part 306: Equipment – Luminaires and lighting accessories

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
This redline version of the official IEC Standard allows the user to identify the changes made to
the previous edition IEC 60092-306:2009. A vertical bar appears in the margin wherever a change
has been made. Additions are in green text, deletions are in strikethrough red text.

IEC 60092-306 has been prepared by IEC tech
...