Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing

IEC 61857-32:2019 series is focused on applications where other possible factors need to be incorporated to evaluate any influence on the performance of the electrical insulation system (EIS). Multi-factor evaluation is the most complex type of project to design and conduct. Clear guidelines are needed to give the user of this document a uniform approach and a method to analyse the test results.
This document is for applications where the stresses are some combination of other factors of influence identified in IEC 60505. The multi-factor stresses are applied during the diagnostic portion of each test cycle.
A few examples of other factors of influence or multi-factor stresses are:
– high vibration;
– submersion in oils, water, or solutions;
– voltage higher than the test voltage of the reference EIS;
– decreased cold shock temperature.

Systèmes d'isolation électrique - Procédures d'évaluation thermique - Partie 32: Évaluation multifactorielle avec facteurs augmentés pendant les essais de diagnostic

L'IEC 61857-32:2019 concerne essentiellement les applications dans lesquelles il est nécessaire d'intégrer d'autres facteurs possibles pour évaluer l'impact sur les performances du système d'isolation électrique (SIE). L'évaluation multifactorielle est le type de projet le plus complexe à concevoir et réaliser. Des lignes directrices claires sont nécessaires pour proposer à l'utilisateur du présent document une approche uniforme et une méthode d'analyse des résultats d'essai.
Le présent document concerne les applications dans lesquelles les contraintes combinent d'autres facteurs d'influence identifiés dans l'IEC 60505. Les contraintes multifactorielles sont appliquées pendant la partie de chaque cycle d'essai relative au diagnostic.
Quelques exemples d'autres facteurs d'influence ou de contraintes multifactorielles sont:
– les fortes vibrations;
– l'immersion dans l'huile, l'eau ou des solutions;
– une tension supérieure à la tension d'essai du SIE de référence;
– une température de choc au froid diminuée.

General Information

Status
Published
Publication Date
13-Oct-2019
Current Stage
PPUB - Publication issued
Start Date
01-Nov-2019
Completion Date
14-Oct-2019
Ref Project

Buy Standard

Standard
IEC 61857-32:2019 - Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing
English and French language
33 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61857-32 ®
Edition 1.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Electrical insulation systems – Procedures for thermal evaluation –
Part 32: Multifactor evaluation with increased factors during diagnostic testing

Systèmes d'isolation électrique – Procédures d'évaluation thermique –
Partie 32: Évaluation multifactorielle avec facteurs augmentés pendant
les essais de diagnostic
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 61857-32 ®
Edition 1.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Electrical insulation systems – Procedures for thermal evaluation –

Part 32: Multifactor evaluation with increased factors during diagnostic testing

Systèmes d'isolation électrique – Procédures d'évaluation thermique –

Partie 32: Évaluation multifactorielle avec facteurs augmentés pendant

les essais de diagnostic
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.080.30 ISBN 978-2-8322-7463-7

– 2 – IEC 61857-32:2019 © IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Procedure . 7
5 Test objects . 7
6 EIS evaluation . 7
7 Part 1: Baseline structure . 8
7.1 General . 8
7.2 Illustration of the structure – Thermal evaluation . 8
7.3 Example of thermal evaluation of a candidate EIS . 9
8 Part 2: Evaluation of other factors . 10
8.1 General . 10
8.2 Selection of the ageing temperature for the one-temperature comparison . 10
8.3 Application of increased or additional diagnostic factors . 11
9 Analysis of data . 11
9.1 General . 11
9.2 Evaluation of the other factors of influence . 11
9.3 Comparison of the results is between the baseline EIS and any of the sets of
results for other factors of influence . 11
10 Report . 12
Bibliography . 13
Annex A (informative)  Example of a test data sheet report . 14
Annex B (informative) Example of thermal ageing data for the reference EIS –
Establishing the correlation time . 15
Annex C (informative) Example of a test data sheet for a baseline candidate thermal
classification . 16
Annex D (informative) Establishing the thermal endurance of the baseline candidate
using the reference correlation time . 17

Figure 1 – Overview . 7
Figure 2 – Illustration of the establishment of the thermal classification of
the candidate EIS . 9
Figure B.1 – Reference data with the known temperature of 186 °C, time coordinate
established at 45 200 h . 15
Figure D.1 – Baseline candidate data with the known thermal index of 161 °C when the
time coordinate from the reference is 45 200 hours . 17

Table 1 – Example of a reference EIS and candidate EIS; performance at temperature
and thermal classification. 9
Table 2 – Example of ageing temperature selection for the one-temperature
comparison . 10
Table A.1 – Example of a test data sheet . 14
Table C.1 – Example of a test data sheet for a baseline candidate . 16

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSULATION SYSTEMS – PROCEDURES
FOR THERMAL EVALUATION –
Part 32: Multifactor evaluation with increased
factors during diagnostic testing

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC sha
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.