IEC 60364-7-708:2017

Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

IEC 60364-7-708:2017 lays down requirements applying only to circuits intended to supply leisure accommodation vehicles, tents or residential park homes in caravan parks, camping parks and similar locations. This new edition includes the following significant technical changes with respect to the previous edition:
- new requirements to protect against impact;
- new requirements for socket outlets and connectors.

Installations électriques à basse tension - Partie 7-708: Exigences pour les installations ou emplacements particuliers - Parcs de caravanes, parcs de camping et emplacements analogues

EC 60364-7-708:2017 s’applique seulement aux circuits destinés à alimenter les véhicules de loisirs, les tentes et les habitations de parc résidentiel dans les parcs de caravanes, dans les parcs de camping et aux emplacements analogues.
NOTE Pour les besoins du présent document, le terme "parc de caravanes" comprend "parcs de camping et emplacements analogues".
Les exigences particulières ne s’appliquent pas aux installations électriques intérieures des véhicules de loisirs, des unités mobiles ou transportables ou habitations de parc résidentiel. Cette troisième édition annule et remplace la deuxième édition parue en 2007. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
– les exigences pour la protection contre les chocs ont été modifiées: le matériel installé sur un emplacement de camping doit désormais être protégé contre les chocs de sévérité élevée AG3 (degré minimal de protection IK 08);
– les socles de prise de courant et les connecteurs doivent désormais être verrouillés conformément aux normes de l’IEC afin d’éviter que les contacts femelles soient actifs lorsqu’ils sont accessibles.

General Information

• Status: Published
• Publication Date: 09-Apr-2017
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 91.140.50 - Electricity supply systems
• Technical Committee: TC 64 - Electrical installations and protection against electric shock
• Drafting Committee: MT 33 - TC 64/MT 33
• Current Stage: PPUB - Publication issued
• Start Date: 21-Apr-2017
• Completion Date: 10-Apr-2017

Relations

• Revises: IEC 60364-7-708:2007 - Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60364-7-708 ®
Edition 3.0 2017-04
INTERNATIONAL
STANDARD
Low-voltage electrical installations –
Part 7-708: Requirements for special installations or locations – Caravan parks,
camping parks and similar locations

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 60364-7-708 ®
Edition 3.0 2017-04
INTERNATIONAL
STANDARD
Low-voltage electrical installations –

Part 7-708: Requirements for special installations or locations – Caravan parks,

camping parks and similar locations

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 91.140.50 ISBN 978-2-8322-4148-6

– 2 – IEC 60364-7-708:2017 © IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
708 Caravan parks, camping parks and similar locations . 6
708.1 Scope . 6
708.2 Normative references . 6
708.3 Terms and definitions . 6
708.31 Purposes, supplies and structure . 7
708.312 Conductor arrangement and system earthing . 7
708.313 Supplies . 7
708.4 Protection for safety . 8
708.41 Protection against electric shock . 8
708.415 Additional protection . 8
708.5 Selection and erection of electrical equipment. 8
708.51 Selection and erection of electrical equipment – Common rules . 8
708.512 Operational conditions and external influences . 8
708.52 Wiring systems . 9
708.521 Types of wiring systems . 9
708.533 Devices for protection against overcurrent . 9
708.536 Isolation and switching . 10
708.55 Other equipment . 10
Annex A (informative) List of notes concerning certain countries . 11
Bibliography . 12

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –

Part 7-708: Requirements for special installations or locations –
Caravan parks, camping parks and similar locations

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60364-7-708 has been prepared by IEC technical committee 64:
Electrical installations and protection against electric shock.
This third edition cancels and replaces the second edition published in 2007. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– requirements to protect against impact has changed: equipment installed in a campsite
now has to be protected against impact of high severity AG3 (minimum degree of
protection IK 08);
– socket outlets and connectors are now required to be interlocked in accordance with IEC
standards to prevent the socket contacts being live when accessible.

– 4 – IEC 60364-7-708:2017 © IEC 2017
The text of this standard is based on the following documents:
FDIS Report on voting
64/2162/FDIS 64/2186/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The reader’s attention is drawn to the fact that Annex A lists all of the “in-some-country”
clauses on differing practices of a less permanent nature relating to the subject of this
standard.
A list of all parts in the IEC 60364 series, published under the general title Low-voltage
electrical installations, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

INTRODUCTION
For the purpose of this part (IEC 60364-7-708) the requirements of the general Parts 1 to 6 of
IEC 60364 apply.
The IEC 60364-7-7XX parts of IEC 60364 contain particular requirements for special
installations or locations which are based on the requirements of the general parts of
IEC 60364 (IEC 60364-1 to IEC 60364-6). These IEC 60364-7-7XX parts are considered in
conjunction with the requirements of the general parts.
The particular requirements of this part of IEC 60364 supplement, modify or replace certain of
the requirements of the general parts of IEC 60364 being valid at the time of publication of
this part. The absence of reference to the exclusion of a part or a clause of a general part
means that the corresponding clauses of the general part are applicable (undated reference).
Requirements of other 7XX parts being relevant for installations covered by this part also
apply. This part may therefore also supplement, modify or replace certain of these
requirements valid at the time of publication of this part.
The clause numbering of this part follows the pattern and corresponding references of
IEC 60364. The numbers following the particular number of this part are those of the
corresponding parts, or clauses of the other parts of the IEC 60364 series, valid at the time of
publication of this part, as indicated in the normative references of this document (dated
reference).
If requirements or explanations additional to those of the other parts of the IEC 60364 series
are needed, the numbering of such items appears as 708.101, 708.102, 708.103 etc.
In the case where new or amended general parts with modified numbering were published
after this part was issued, the clause numbers referring to a general part in this 701 part may
no longer align with the latest edition of the general part. Dated references should be
observed.
– 6 – IEC 60364-7-708:2017 © IEC 2017
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –

Part 7-708: Requirements for special installations or locations –
Caravan parks, camping parks and similar locations

708 Caravan parks, camping parks and similar locations
708.1 Scope
The particular requirements contained in this part of IEC 60364 apply only to circuits intended
to supply leisure accommodation vehicles, tents or residential park homes in caravan parks,
camping parks and similar locations.
NOTE For the purposes of this document caravan park includes camping parks and similar locations.
The particular requirements do not apply to the internal electrical installations of leisure
accommodation vehicles, mobile or transportable units or residential park homes.
708.2 Normative references
The following documents are referred to in the text in such a way that som
...

IEC 60364-7-708 ®
Edition 3.0 2017-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –
Part 7-708: Requirements for special installations or locations – Caravan parks,
camping parks and similar locations

Installations électriques à basse tension –
Partie 7-708: Exigences pour les installations ou emplacements particuliers –
Parcs de caravanes, parcs de camping et emplacements analogues

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 60364-7-708 ®
Edition 3.0 2017-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –

Part 7-708: Requirements for special installations or locations – Caravan parks,

camping parks and similar locations

Installations électriques à basse tension –

Partie 7-708: Exigences pour les installations ou emplacements particuliers –

Parcs de caravanes, parcs de camping et emplacements analogues

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 91.140.50 ISBN 978-2-8322-8097-3

– 2 – IEC 60364-7-708:2017 © IEC 2017
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
708 Caravan parks, camping parks and similar locations . 6
708.1 Scope . 6
708.2 Normative references . 6
708.3 Terms and definitions . 6
708.31 Purposes, supplies and structure . 7
708.312 Conductor arrangement and system earthing . 7
708.313 Supplies . 7
708.4 Protection for safety . 8
708.41 Protection against electric shock . 8
708.415 Additional protection . 8
708.5 Selection and erection of electrical equipment. 8
708.51 Selection and erection of electrical equipment – Common rules . 8
708.512 Operational conditions and external influences . 8
708.52 Wiring systems . 9
708.521 Types of wiring systems . 9
708.533 Devices for protection against overcurrent . 9
708.536 Isolation and switching . 10
708.55 Other equipment . 10
Annex A (informative) List of notes concerning certain countries . 11
Bibliography . 12

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –

Part 7-708: Requirements for special installations or locations –
Caravan parks, camping parks and similar locations

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60364-7-708 has been prepared by IEC technical committee 64:
Electrical installations and protection against electric shock.
This third edition cancels and replaces the second edition published in 2007. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– requirements to protect against impact has changed: equipment installed in a campsite
now has to be protected against impact of high severity AG3 (minimum degree of
protection IK 08);
– socket outlets and connectors are now required to be interlocked in accordance with IEC
standards to prevent the socket contacts being live when accessible.

– 4 – IEC 60364-7-708:2017 © IEC 2017
The text of this standard is based on the following documents:
FDIS Report on voting
64/2162/FDIS 64/2186/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The reader’s attention is drawn to the fact that Annex A lists all of the “in-some-country”
clauses on differing practices of a less permanent nature relating to the subject of this
standard.
A list of all parts in the IEC 60364 series, published under the general title Low-voltage
electrical installations, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
INTRODUCTION
For the purpose of this part (IEC 60364-7-708) the requirements of the general Parts 1 to 6 of
IEC 60364 apply.
The IEC 60364-7-7XX parts of IEC 60364 contain particular requirements for spec
...