IEC 60364-1:2005/COR1:2009
(Corrigendum)Corrigendum 1 - Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
Corrigendum 1 - Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
Corrigendum 1 - Installations électriques à basse tension - Partie 1: Principes fondamentaux, détermination des caractéristiques générales, définitions
General Information
Relations
Standards Content (Sample)
IEC 60364-1 CEI 60364-1
(Fifth edition – 2005) (Cinquième édition – 2005)
Low-voltage electrical installations – Installations électriques à basse tension –
Part 1: Fundamental principles, assessment of Partie 1: Principes fondamentaux, détermination
general characteristics, definitions des caractéristiques générales, définitions
CORRIGENDUM 1
12 Normative references 12 Références normatives
Instead of: Au lieu de:
IEC 60364-4-41, Electrical installations of CEI 60364-4-41, Installations électriques
buildings – Part 4-41: Protection for safety des bâtiments – Partie 4-41: Protection
– Protection against electric shock pour assurer la sécurité – Protection
contre les chocs électriques
re
...
This May Also Interest You
IEC 60364-7-706:2024 applies to:
• fixed equipment within conducting locations with restricted movement; and
• supplies to equipment used within conducting locations with restricted movement.
This third edition cancels and replaces the second edition published in 2005 and Amendment 1:2019. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The structure of clauses 706.41X has been updated following the structure of IEC 60364-4-41:2005 and IEC 60364-4-41:2005/AMD1:2017.
- Standard20 pagesEnglish and French languagesale 15% off
IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3.
Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power.
The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3.
This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).
- Standard21 pagesEnglish and French languagesale 15% off
IEC 60364-4-43:2023 provides requirements for:
- protection of live conductors, PEN conductors, PEM conductors, and PEL conductors against the harmful effects caused by overcurrent;
- coordination of measures for protection against overcurrent.
This fourth edition cancels and replaces the third edition published in 2008. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the standard has been restructured, see Table 1 (Correspondence between IEC 60364‑4‑43:2008 and this document) below;
b) the measure "automatic disconnection of supply" has been designated as the preferred measure for protection against overcurrent;
c) all measures except the measure "automatic disconnection of supply" have been transferred into new normative annexes to indicate that these measures are usable in certain applications and under certain restricted conditions only (see Annex A, Annex B and Annex E);
d) a new clause "Terms and definitions" has been added;
e) new requirements have been added for the protection of the neutral or mid-point conductor (with and without triplen harmonics).
- Standard67 pagesEnglish and French languagesale 15% off
IEC 60364-8-82:2022 provides requirements and recommendations that apply to low-voltage electrical installations connected or not to a distribution network able to operate:
– with local power supplies, and/or
– with local storage units,
and that monitors and controls the energy from the locally connected sources delivering it to:
– current-using equipment, and/or
– local storage units, and/or
– distribution networks.
Such electrical installations are designated as prosumer's electrical installations (PEIs).
These requirements and recommendations apply to new installations and modifications of existing installations.
This document also provides requirements and recommendations for the safe, efficient and correct behaviour of these installations when integrated into a smart grid.
Information related to grid interaction to ensure the stability of the electrical system for grid connected PEIs is given in Annex B.
This document covers the requirements related to stability of islanded and stand-alone PEIs.
This first edition cancels and replaces IEC 60364-8-2 published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to IEC 6036482:2018:
a) the vocabulary and concepts have been aligned as much as possible with those used by TC 8 and SC 8B, taking notably into account the IEC 62898 and IEC 62786 series, still respecting the installers mindset (installers being the first users of the IEC 60364 series and being used to only refer to the IEC 60364 series);
b) the type of system earthing and the change of type of system earthing (sequencing) when there is a change of mode of the prosuming installation, have been clarified;
c) the conditions of connection and disconnection from the DSO network have also been described, both from the safety point of view and the proper functioning point of view;
d) additional requirements have been introduced;
e) the figures have been updated;
f) a new normative Annex D on single dwelling or similar application islandable PEIs has been added;
g) the numbering has also been reviewed to follow the updated numbering system of the IEC 60364 series, in line with the IEC Directives and compatible with Parts 7.
- Standard146 pagesEnglish and French languagesale 15% off
IEC 60364-5-57:2022 provides requirements and recommendations for the design, erection, correct use and protection of installations with secondary stationary batteries as prime storage medium, hereinafter referred to as "stationary secondary batteries".
This document is not applicable to products such as batteries and to systems design (including batteries) which are already covered by their own IEC standard.
- Standard50 pagesEnglish and French languagesale 15% off
IEC 60050-826:2022 gives the general terminology used for electrical installations such as those of residential, industrial or commercial premises. It does not cover systems for distribution of energy to the public or power generation and transmission for such systems. This new edition reviews and complements the previous one. An important aim of the revision is to achieve compliance with IEC 61140:2016. In addition, some new terms have been added from IEC 60364-8-1:2014 and IEC 60364-8-2:2018. It has the status of a horizontal publication in accordance with IEC Guide 108.
This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
This horizontal publication is primarily intended for use by technical committees in the preparation of IEC publications in accordance with the principles laid down in IEC Guide 108.
One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal publications in the preparation of its publications.
- Standard113 pagesEnglish and French languagesale 15% off
IEC 60364-7-710:2021 applies to electrical installations in medical locations so as to provide safety of patients and medical staff. These requirements refer to:
– hospitals and clinics or equivalent institutions (including equivalent transportable and mobile locations);
which, subject to assessment (710.30), can also include:
– sanatoriums and health clinics;
– dedicated locations in homes for senior citizens and aged care homes, where patients receive medical care;
– medical centres, outpatients' clinics and departments, casualty wards;
– other outpatients' institutions (industrial, sports and others);
– medical and dental practices;
– dedicated medical rooms in the workplace;
– other locations where medical electrical equipment is used;
– veterinary clinics;
– rooms in existing installations where a change of utilization for medical applications occur.
This list is not exhaustive.
The requirements of this document do not apply to ME equipment or ME systems.
This edition includes the following significant technical changes with respect to the previous edition:
a) the scope provides improved information to the application of this document;
b) some terms and definitions have been revised;
c) the validity of the respective parts of the IEC 60364 series has been verified and clauses updated;
d) Clause 710.30 has been extended;
e) Clause 710.41 has been updated;
f) Clause 710.413 has been renumbered as Clause 710.411;
g) in 710.411 insulation fault location systems have been added;
h) Clause 710.421 has been extended to include arc fault detection devices;
i) Clause 710.44 has been added;
j) Clause 710.51 has been updated and now covers distribution boards and electrical operating areas;
k) Clause 710.514, has been extended and includes separate subclauses on diagrams, documentation and operating instructions;
l) Subclauses 710.531 to 710.537 have been added;
m) Clause 710.55 has been updated;
n) Clause 710.56 has been added;
o) Clause 710.6, Verification, has been revised;
p) Annex A was deleted, and the contents integrated into 710.560.4;
q) former Annex B is now Annex A and has been updated;
r) an informative Annex B on guidance concerning electromagnetic interferences (EMI) in installations of buildings has been added
- Standard83 pagesEnglish and French languagesale 15% off
- Standard22 pagesEnglish and French languagesale 15% off
IEC 60364-5-54:2011 addresses the earthing arrangements and protective conductors including protective bonding conductors in order to satisfy the safety of the electrical installation. This third edition cancels and replaces the second edition, published in 2002, and constitutes a technical revision. The main changes with respect to the previous edition are listed below:
- clarification of the definition of protective conductor;
- improved specification of mechanical characteristics of the earth electrode;
- introduction of earth electrode for protection against electric shock and lighting protection;
- annexes describing concrete-embedded foundation earth electrodes and soil-embedded earth electrode.
- Standard83 pagesEnglish and French languagesale 15% off
- Standard182 pagesEnglish and French languagesale 15% off
IEC 60364-5-53:2019 Deals with general requirements for isolation, switching and control and with the requirements for selection and erection of the devices provided to fulfil such functions. This fourth edition cancels and replaces the third edition published in 2001, Amendment 1:2002 and Amendment 2:2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) revision of all clauses except 531 and 534;
b) introduction of a new Clause 537 Monitoring;
c) Clause 530 contains all normative references and all terms and definitions.
- Standard75 pagesEnglish languagesale 15% off
- Standard152 pagesEnglish and French languagesale 15% off
- Standard369 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.