IEC 61280-4-1:2019/COR2:2022
(Corrigendum)Corrigendum 2 - Fibre-optic communication subsystem test procedures - Part 4-1: Installed cabling plant - Multimode attenuation measurement
Corrigendum 2 - Fibre-optic communication subsystem test procedures - Part 4-1: Installed cabling plant - Multimode attenuation measurement
Corrigendum 2 - Procédures d’essai des sous-systèmes de télécommunication fibroniques - Partie 4-1: Installation câblée – Mesure de l’affaiblissement en multimodal
General Information
Relations
Standards Content (Sample)
IEC 61280-4-1:2019/COR2:2022 – 1 –
IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 61280-4-1 IEC 61280-4-1
Edition 3 2019-05 Édition 3 2019-05
Fibre-optic communication subsystem test Procédures d'essai des sous-systèmes de
procedures – télécommunication fibroniques –
Part 4-1: Installed cabling plant – Multimode Partie 4-1: Installation câblée – Mesure de
attenuation measurement l'affaiblissement en multimodal
CO RRI G E NDUM 2
...
This May Also Interest You
IEC 61280-1-4:2023 is available as IEC 61280-1-4:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61280-1-4:2023 establishes the characterization process of the encircled flux measurement method of light sources intended to be used with multimode fibre. This document sets forth a procedure for the collection of two-dimensional fibre optic nearfield greyscale data and subsequent reduction to one-dimensional data expressed as a set of three sampled parametric functions of radius from the fibre’s optical centre. Estimation of the fibre core diameter is not an objective of this document. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- improvement of calibration procedure and calibration traceability;
- improvement of fibre shaker description and requirements;
- addition of pulsed light sources;
- removal of a poorly traceable calibration process using a micro positioner.
- Standard59 pagesEnglish and French languagesale 15% off
IEC TR 62343-6-12:2023 which is a Technical Report, reports the results of a recently conducted survey on performance specifications for 1 × N wavelength selective switches. This information is intended to provide a framework for the preparation of performance specification standards for wavelength selective switches. The purpose of this document is to provide guidelines for performance values of the specification items listed in IEC 62343-3-3.
- Technical report9 pagesEnglish languagesale 15% off
IEC 62343:2023 is available as IEC 62343:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62343:2023 applies to all commercially available optical dynamic modules and devices. It describes the products covered by the IEC 62343 series, defines terminology, fundamental considerations and basic approaches. The object of this document is to:
- establish uniform requirements for operation, reliability and environmental properties of dynamic modules (DMs) to be implemented in the appropriate DM standard, and
- provide assistance to the purchaser in the selection of consistently high-quality DM products for their particular applications, as well as in the consultation of the appropriate specific DM standard(s).
This document covers performance templates, performance standards, reliability qualification requirements, hardware and software interfaces and related testing methods. Since a dynamic module integrates an optical module/device, printed wiring board, and software/firmware, the standards developed in the series will mimic appropriate existing standards. On the other hand, since "dynamic module" is a relatively new product category, the dynamic module standards series will not be bound by the existing practices where requirements differ.The safety standards as related to dynamic modules are mostly optical power considerations, which is covered by the IEC 60825 series (see Clause 6). This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of terms and definitions for optical multicast switches (3.8);
- revision of Clause 4, listing the requirements for standards in the IEC 62343 series;
- addition of Clause 6 (Safety requirements).
- Standard64 pagesEnglish and French languagesale 15% off
IEC 62007-1:2015 is a specification template for essential ratings and characteristics of the following categories of semiconductor optoelectronic devices to be used in the field of fibre optic systems and subsystems:
- semiconductor photoemitters;
- semiconductor photoelectric detectors;
- monolithic or hybrid integrated optoelectronic devices and their modules. This part of IEC 62007 provides a frame for the preparation of detail specifications for the essential ratings and characteristics. In using this part of IEC 62007, detail specification writers add but do not delete specification parameters and/or groups of specification parameters for particular applications. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. The definitions of some symbols and terms are revised in order to harmonize them with those in other SC 86C documents; A clause on APD-TIA has been added. Keywords: semiconductor optoelectronic devices, semiconductor photoemitters, semiconductor photoelectric detectors, monolithic or hybrid integrated optoelectronic devices
- Standard136 pagesEnglish and French languagesale 15% off
- Standard66 pagesEnglish and French languagesale 15% off
- Standard5 pagesEnglish and French languagesale 15% off
IEC TR 61282-16:2022 is a technical report on coherent optical receiver and transmitter technologies that are employed in fibre optic communication systems as well as in optical test and measurement equipment. This document describes the principle of operation and functional capabilities of coherent optical receivers as well as the operation of optical transmitters used to generate complex vector-modulated signals. It is intended to serve as a technical foundation for other IEC documents and standards related to coherent optical transmission techniques.
- Technical report119 pagesEnglish languagesale 15% off
- Standard2 pagesEnglish and French languagesale 15% off
- Standard8 pagesEnglish and French languagesale 15% off
IEC 61280-1-3:2021 is available as IEC 61280-1-3:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61280-1-3:2021 provides definitions and measurement procedures for several wavelength and spectral width properties of an optical spectrum associated with a fibre optic communication subsystem, an optical transmitter, or other light sources used in the operation or test of communication subsystems. This document also provides definitions and measurement procedures for side-mode suppression ratio and signal-to-source spontaneous emission ratio. The measurement is done for the purpose of system construction and/or maintenance. In the case of communication subsystem signals, the optical transmitter is typically under modulation. NOTE Different properties can be appropriate to different spectral types, such as continuous spectra characteristics of light-emitting diodes (LEDs), as well as multilongitudinal-mode (MLM), multitransverse-mode (MTM) and single-longitudinal mode (SLM) spectra, which are characteristic of laser diodes (LDs). This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of measurement of signal-to-source spontaneous emission ratio in 8.9;
- change of document title to reflect the additional measurement;
- additional information on the resolution bandwidth used in the measurement of the side-mode suppression ratio in 8.8;
- use of a calibrated optical wavelength meter for accurate wavelength measurements of single-longitudinal mode lasers.
- Standard45 pagesEnglish and French languagesale 15% off
IEC TR 62572-4:2020 is available as IEC TR 62572-4:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC/TR 62572-4:2020, which is a Technical Report, provides guidelines for optical connector end-face cleaning methods for receptacle style optical transceivers. It includes details about handling receptacle style optical transceivers, internal structures of optical transceivers, information on cleaning tools and machines, applicable cleaning methods, and cleaning procedures. Receptacle style optical transceivers as well as optical fibre patch cords are handled by operators and maintenance staff of optical network systems. This document can be used as a guideline to prepare instruction manuals for the operators and maintenance staff of optical network systems. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of terms and definitions on multifibre connector interface optical transceivers;
- addition of cleaning methods for multifibre connector interface type optical transceivers;
- updating URLs for reference websites.
- Technical report25 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.