IEC 60335-2-4:2008/AMD1:2012

Amendment 1 - Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors

Amendement 1 - Appareils électrodomestiques et analogues - Sécurité - Partie 2-4: Règles particulières pour les essoreuses centrifuges

General Information

• Status: Published
• Publication Date: 12-Nov-2012
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 13.120 - Domestic safety
• ICS: 97.060 - Laundry appliances
• Technical Committee: TC 61 - Safety of household and similar electrical appliances
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 10-Mar-2021

Relations

• Amends: IEC 60335-2-4:2008 - Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors
• Effective Date: 05-Sep-2023
• Revised: IEC 60335-2-4:2021 - Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60335-2-4 ®
Edition 6.0 2012-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Household and similar electrical appliances – Safety –
Part 2-4: Particular requirements for spin extractors

Appareils électrodomestiques et analogues – Sécurité –
Partie 2-4: Règles particulières pour les essoreuses centrifuges

IEC 60335-2-4:2008/A1:2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: [e-mail].

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: [e-mail].
IEC 60335-2-4 ®
Edition 6.0 2012-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Household and similar electrical appliances – Safety –

Part 2-4: Particular requirements for spin extractors

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-4: Règles particulières pour les essoreuses centrifuges

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX D
ICS 13.120; 97.060 ISBN 978-2-83220-464-1

– 2 – 60335-2-4 Amend. 1 © IEC:2012
FOREWORD
This amendment has been prepared by committee 61: Safety of household and similar
electrical appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
61/4447/FDIS 61/4500/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 12 months or later than 36 months from the date of publication.
_____________
Contents
Replace the title of Clause 3 but not the clause number, by the following:
Terms and definitions
3 Definitions
Replace the title of Clause 3 but not the clause number, by the following:
Terms and definitions
20 Stability and mechanical hazards
20.101 Add the following to the test specification before the penultimate paragraph.
If compliance relies on the operation of an electronic circuit, the test is repeated with the
fault conditions in a) to g) of 19.11.2 applied one at a time to the electronic circuit.
20.103 Add the following after the second paragraph of the test specification:

60335-2-4 Amend. 1 © IEC:2012 – 3 –
If compliance relies on the operation of an electronic circuit, the test is repeated under the
following conditions applied separately:
– the fault conditions in a) to g) of 19.11.2 applied one at a time to the electronic circuit;
– the electromagnetic phenomena tests of 19.11.4.1 to 19.11.4.6 applied to the appliance.
In an appliance containing lids or doors that are controlled by one or more interlocks, one of
the interlocks may be released provided that the following conditions are fulfilled:
– the lid or door does not move automatically to an open position when the interlock is
released;and
– the appliance will not restart after the cycle in which the interlock was released.
Add the following new text after the Note:
If the electronic circuit is programmable, the software shall contain measures to control the
fault/error conditions specified in Table R1 and is evaluated in accordance with the relevant
requirements of Annex R.
20.104 Replace the test specification and the Note by the following:
Compliance is checked by measurement of the maximum peripheral speed, by calculation of
the rotational kinetic energy and by the following test, which is carried out after repeating the
spillage test of 15.2.
NOTE The rotational kinetic energy is calculated in accordance with the formula in 20.103.
The appliance is supplied at rated voltage and operated empty. For appliances having a
single lid and for appliances incorporating two lids where the second lid does not open
independently of the first lid, the lid or first lid as appropriate is gradually opened and
– with an opening of 4 mm to 10 mm, it shall not be possible to touch parts rotating at a
speed exceeding 60 r/min with the test probe 12 of IEC 61032;
– with an opening greater than 10 mm, but not more than 12 mm, it shall not be possible to
touch parts rotating at a speed exceeding 60 r/min with a test rod 3 mm in diameter and
120 mm long. In addition, the test probe B of IEC 61032 is applied and shall not come
within a distance of 20 mm from the rotating parts;
– with an opening greater than 12 mm, the motor shall be disconnected from the supply and
within 7 s, the drum speed shall not exceed 60 r/min.
For appliances incorporating two lids where the second lid opens independently of the first lid,
the first lid is gradually opened and with an opening greater than 50 mm, the motor shall be
disconnected from the supply and wit
...