IEC TR 62977-1-31:2021/AMD1:2022
(Amendment)Amendment 1 - Electronic displays - Part 1-31: Generic - Practical information on the use of light measuring devices
Amendment 1 - Electronic displays - Part 1-31: Generic - Practical information on the use of light measuring devices
General Information
Relations
Standards Content (Sample)
IEC TR 62977-1-31 ®
Edition 1.0 2022-03
TECHNICAL
REPORT
colour
inside
AMENDMENT 1
Electronic displays –
Part 1-31: Generic – Practical information on the use of light measuring devices
IEC TR 62977-1-31:2021-04/AMD1:2022-03(en)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC TR 62977-1-31 ®
Edition 1.0 2022-03
TECHNICAL
REPORT
colour
inside
AMENDMENT 1
Electronic displays –
Part 1-31: Generic – Practical information on the use of light measuring devices
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.120; 31.260 ISBN 978-2-8322-1087-8
– 2 – IEC TR 62977-1-31:2021/AMD1:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRONIC DISPLAYS –
Part 1-31: Generic – Practical information
on the use of light measuring devices
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 62977-1-31:2021 has been prepared IEC technical committee 110:
Electronic displays.
The text of this Amendment is based on the following documents:
Draft Report on voting
110/1380/DTR 110/1404A/DVDTR
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.
© IEC 2022
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.
____________
INTRODUCTION to Amendment 1
This document provides additional information to IEC TR 62977-1-31:2021 regarding the
influence of spectral stray light and spectral bandwidth of a spectroradiometer on chromaticity
measurements. It is described in Annex E.
This document also provides the corrections of editorial errors of IEC TR 62977-1-31:2021. The
corrections are:
– Typos are fixed:
• “fiber” and “x(λ), y(λ), z(λ)” is replaced with “fibre” and “𝑥𝑥(𝜆𝜆),𝑦𝑦(𝜆𝜆),𝑧𝑧(𝜆𝜆)”, respectively in
Figure 2,
• “(%)” in the label of vertical axis is removed in Figure 9, Figure 10, and Figure 12,
• “0” label of the tick mark of vertical axis is replaced with “1” in Figure C.4.
– The lists for Formula (A.1) and Formula (B.1) are aligned.
– 4 – IEC TR 62977-1-31:2021/AMD1:2022
© IEC 2022
Figure 2 – Example of configurations for the input optics and detector
Replace, in Figure 2, Figure 2b) and Figure 2c) with the following new Figure 2b) and Figure
2c):
b) Colorimeter c) Spectroradiometer with spectrometer using
grating and array detector
5.5.2.1 General
Replace, in NOTE 2, the fourth sentence with the following new sentence:
Experimental data demonstrating the influence of spectral stray light in a specific application are shown in Annex E
[12].
Add, after NOTE 2, the following new NOTE 3:
NOTE 3 The influence of spectral bandwidth on chromaticity measurements of narrow spectral linewidth light is
shown in Annex E.
© IEC 2022
Figure 9 – Calculated chromaticity differences as a function of wavelength error
Replace Figure 9 with the following new figure:
a) DUT-1 (chromaticity coordinate, x) b) DUT-1 (chromaticity coordinate, y)
c) DUT-2 (chromaticity coordinate, x) d) DUT-2 (chromaticity coordinate, y)
e) DUT-3 (chromaticity coordinate, x) f) DUT-3 (chromaticity coordinate, y)
– 6 – IEC TR 62977-1-31:2021/AMD1:2022
© IEC 2022
Figure 10 – Calculated chromaticity differences as a function of spectral bandwidth
Replace Figure 10 with the following new figure:
a) DUT-1 (chromati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.