IEC 61400-1:2005

Wind turbines - Part 1: Design requirements

Specifies essential design requirements to ensure the engineering integrity of wind turbines. Provides an appropriate level of protection against damage from all hazards during the planned lifetime. Is concerned with all subsystems of wind turbines such as control and protection mechanisms, internal electrical systems, mechanical systems and support structures. Applies to wind turbines of all sizes. See IEC 61400-2 for small wind turbines.
This publication is of high relevance for Smart Grid.

Eoliennes - Partie 1: Exigences de conception

Spécifie les exigences de conception essentielles pour assurer l'intégrité technique des éoliennes. A pour objet de fournir un niveau de protection approprié contre les dommages causés par tous les risques pendant la durée de vie prévue. Concerne tous les sous-systèmes des éoliennes tels que les mécanismes de commande et de protection, les systèmes électriques internes, les systèmes mécaniques et les structures de soutien. Pour les petites éoliennes, la CEI 61400-2 s'applique.

General Information

• Status: Published
• Publication Date: 02-Feb-2016
• ICS: 27.180 - Wind turbine energy systems
• Technical Committee: TC 88 - Wind energy generation systems
• Drafting Committee: MT 1 - TC 88/MT 1
• Current Stage: DELPUB - Deleted Publication
• Completion Date: 08-Feb-2019

Relations

• Amended By: IEC 61400-1:2005/AMD1:2010 - Amendment 1 - Wind turbines - Part 1: Design requirements
• Effective Date: 05-Sep-2023
• Revised: IEC 61400-1:2019 - Wind energy generation systems - Part 1: Design requirements
• Effective Date: 05-Sep-2023
• Revises: IEC 61400-1:1999 - Wind turbine generator systems - Part 1: Safety requirements
• Effective Date: 05-Sep-2023

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 61400-1
Third edition
2005-08
Wind turbines –
Part 1:
Design requirements
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the

60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.

Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,

edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the

base publication incorporating amendment 1 and the base publication incorporating

amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 61400-1
Third edition
2005-08
Wind turbines –
Part 1:
Design requirements
 IEC 2005  Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale XC
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

– 2 – 61400-1  IEC:2005
CONTENTS
FOREWORD.5

INTRODUCTION.7

1 Scope.8

2 Normative references.8

3 Terms and definitions .9

4 Symbols and abbreviated terms .17
4.1 Symbols and units .17
4.2 Abbreviations.19
5 Principal elements .19
5.1 General .19
5.2 Design methods.19
5.3 Safety classes .20
5.4 Quality assurance.20
5.5 Wind turbine markings .20
6 External conditions .21
6.1 General .21
6.2 Wind turbine classes .21
6.3 Wind conditions .22
6.4 Other environmental conditions.31
6.5 Electrical power network conditions.32
7 Structural design.33
7.1 General .33
7.2 Design methodology .33
7.3 Loads .33
7.4 Design situations and load cases .34
7.5 Load calculations.39
7.6 Ultimate limit state analysis.39
8 Control and protection system.45
8.1 General .45
8.2 Control functions .45

8.3 Protection functions .46
8.4 Braking system .47
9 Mechanical systems.47
9.1 General .47
9.2 Errors of fitting.48
9.3 Hydraulic or pneumatic systems.48
9.4 Main gearbox.48
9.5 Yaw system .49
9.6 Pitch system .49
9.7 Protection function mechanical brakes .49
9.8 Rolling bearings.49

61400-1  IEC:2005 − 3 −
10 Electrical system.50

10.1 General .50

10.2 General requirements for the electrical system .50

10.3 Protective devices.50

10.4 Disconnect devices .50

10.5 Earth system.50

10.6 Lightning protection.51

10.7 Electrical cables.51

10.8 Self-excitation.51

10.9 Protection against lightning electromagnetic impulse .51
10.10 Power quality .51
10.11 Electromagnetic compatibility.51
11 Assessment of a wind turbine for site-specific conditions.52
11.1 General .52
11.2 Assessment of the topographical complexity of the site .52
11.3 Wind conditions required for assessment .52
11.4 Assessment of wake effects from neighbouring wind turbines.53
11.5 Assessment of other environmental conditions .54
11.6 Assessment of earthquake conditions .54
11.7 Assessment of electrical network conditions.55
11.8 Assessment of soil conditions .55
11.9 Assessment of structural integrity by reference to wind data .56
11.10 Assessment of structural integrity by load calculations with reference to site
specific conditions .57
12 Assembly, installation and erection .57
12.1 General .57
12.2 Planning .58
12.3 Installation conditions.58
12.4 Site access .58
12.5 Environmental conditions .58
12.6 Documentation.59
12.7 Receiving, handling and storage.59
12.8 Foundation/anchor systems.59
12.9 Assembly of wind turbine .59

12.10 Erection of wind turbine.59
12.11 Fasteners and attachments .59
12.12 Cranes, hoists and lifting equipment.60
13 Commissioning, operation and maintenance .60
13.1 General .60
13.2 Design requirements for safe operation, inspection and maintenance .60
13.3 Instructions concerning commissioning .61
13.4 Operator’s instruction manual.62
13.5 Maintenance manual.63

– 4 – 61400-1  IEC:2005
Annex A (normative) Design parameters for describing wind turbine class S .65

Annex B (informative) Turbulence models .66

Annex C (informative) Assessment of earthquake loading.72

Annex D (informative) Wake and wind farm turbulence .73

Annex E (informative) Prediction of wind distribution for wind turbine sites by measure-
correlate-predict (MCP) methods.76

Annex F (informative) Statistical extrapolation of loads for ultimate strength analysis .78

Annex G (informative) Fatigue analysis using Miner’s rule with load extrapolation .81

Bibliography .85

Figure 1a –Turbulence standard deviation for the Normal Turbulence Model (NTM) .25
Figure 1b – Turbulence intensity for the Normal Turbulence Model (NTM).25
Figure 2 – Example of extreme operating gust.27
Figure 3 – Example of extreme direction change magnitude .28
Figure 4 – Examp
...

IEC 61400-1 ®
Edition 3.1 2014-04
CONSOLIDATED
VERSION
colour
inside
Wind turbines –
Part 1: Design requirements
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]

CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 14
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 55 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 61400-1 ®
Edition 3.1 2014-04
CONSOLIDATED
VERSION
colour
inside
Wind turbines –
Part 1: Design requirements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.180 ISBN 978-2-8322-1525-8

IEC 61400-1 ®
Edition 3.1 2014-04
REDLINE VERSION
colour
inside
Wind turbines –
Part 1: Design requirements
– 2 – IEC 61400-1:2005
+AMD1:2010 CSV  IEC 2014
CONTENTS
FOREWORD . 5

INTRODUCTION . 7

1 Scope . 8

2 Normative references . 8

3 Terms and definitions . 9

4 Symbols and abbreviated terms . 17

4.1 Symbols and units . 17
4.2 Abbreviations . 19
5 Principal elements . 20
5.1 General . 20
5.2 Design methods . 20
5.3 Safety classes . 20
5.4 Quality assurance . 20
5.5 Wind turbine markings . 21
6 External conditions . 21
6.1 General . 21
6.2 Wind turbine classes . 21
6.3 Wind conditions . 23
6.4 Other environmental conditions . 31
6.5 Electrical power network conditions . 33
7 Structural design . 33
7.1 General . 33
7.2 Design methodology . 33
7.3 Loads . 33
7.4 Design situations and load cases . 34
7.5 Load calculations . 39
7.6 Ultimate limit state analysis . 40
8 Control and protection system . 47
8.1 General . 47
8.2 Control functions . 47

8.3 Protection functions . 48
8.4 Braking system . 49
9 Mechanical systems . 49
9.1 General . 49
9.2 Errors of fitting . 49
9.3 Hydraulic or pneumatic systems . 50
9.4 Main gearbox . 50
9.5 Yaw system . 50
9.6 Pitch system . 51
9.7 Protection function mechanical brakes . 51
9.8 Rolling bearings . 51

+ AMD1:2010 CSV  IEC 2014
10 Electrical system . 52

10.1 General . 52

10.2 General requirements for the electrical system . 52

10.3 Protective devices . 52

10.4 Disconnect devices . 52

10.5 Earth system . 53

10.6 Lightning protection . 53

10.7 Electrical cables . 53

10.8 Self-excitation . 53

10.9 Protection against lightning electromagnetic impulse . 53
10.10 Power quality . 53
10.11 Electromagnetic compatibility . 54
11 Assessment of a wind turbine for site-specific conditions . 54
11.1 General . 54
11.2 Assessment of the topographical complexity of the site . 54
11.3 Wind conditions required for assessment . 55
11.4 Assessment of wake effects from neighbouring wind turbines . 56
11.5 Assessment of other environmental conditions . 56
11.6 Assessment of earthquake conditions . 57
11.7 Assessment of electrical network conditions . 58
11.8 Assessment of soil conditions . 58
11.9 Assessment of structural integrity by reference to wind data . 58
11.10 Assessment of structural integrity by load calculations with reference to
site specific conditions . 60
12 Assembly, installation and erection . 60
12.1 General . 60
12.2 Planning . 61
12.3 Installation conditions . 61
12.4 Site access . 61
12.5 Environmental conditions . 61
12.6 Documentation . 62
12.7 Receiving, handling and storage . 62
12.8 Foundation/anchor systems . 62
12.9 Assembly of wind turbine . 62

12.10 Erection of wind turbine . 62
12.11 Fasteners and attachments . 62
12.12 Cranes, hoists and lifting equipment . 63
13 Commissioning, operation and maintenance . 63
13.1 General . 63
13.2 Design requirements for safe operation, inspection and maintenance . 63
13.3 Instructions concerning commissioning . 64
13.4 Operator’s instruction manual . 65
13.5 Maintenance manual . 66

– 4 – IEC 61400-1:2005
+AMD1:2010 CSV  IEC 2014
Annex A (normative) Design parameters for describing wind turbine class S . 68

Annex B (informative) Turbulence models . 69

Annex C (informative) Assessment of earthquake loading . 74

Annex D (informative) Wake and wind farm turbulence . 75

Annex E (informative) Prediction of wind distribution for wind turbine sites by
measure-correlate-predict (MCP) methods . 78

Annex F (informative) Statistic
...

COR1:2016  IEC 2016
INTERNATIONAL ELECTROTECHNICAL COMMISSION

COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE

____________
IEC 61400-1 IEC 61400-1
Edition 3.1  2014-04 Edition 3.1  2014-04

Wind turbines – Eoliennes –
Part 1: Design requirements Partie 1: Exigences de conception

CO RRI G ENDU M 1
NOTE This corrigendum concerns only NOTE Ce corrigendum ne concerne que
the Final version of IEC 61400-1 CSV, la Version finale de l’IEC 61400-1 CSV,
which was published in 2014-04. publiée en 2014-04.

7.6.2.1 Partial safety factors for loads 7.6.2.1 Facteurs de sécurité partielle
des charges
In the
...

IEC 61400-1
Edition 3.0 2005-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Wind turbines –
Part 1: Design requirements
Eoliennes –
Partie 1: Exigences de conception

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or

IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: [e-mail]
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: [e-mail]
Tel.: [phone]
Fax: [phone]
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: [e-mail]
Tél.: [phone]
Fax: [phone]
IEC 61400-1
Edition 3.0 2005-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Wind turbines –
Part 1: Design requirements
Eoliennes –
Partie 1: Exigences de conception

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XC
CODE PRIX
ICS 27.180 ISBN 2-8318-8161-7
– 2 – 61400-1 © IEC:2005
CONTENTS
FOREWORD.5

INTRODUCTION.7

1 Scope.8

2 Normative references.8

3 Terms and definitions .9

4 Symbols and abbreviated terms .17

4.1 Symbols and units .17
4.2 Abbreviations.19
5 Principal elements .20
5.1 General .20
5.2 Design methods.20
5.3 Safety classes .20
5.4 Quality assurance.21
5.5 Wind turbine markings .21
6 External conditions .21
6.1 General .21
6.2 Wind turbine classes .22
6.3 Wind conditions .23
6.4 Other environmental conditions.31
6.5 Electrical power network conditions.33
7 Structural design.33
7.1 General .33
7.2 Design methodology .34
7.3 Loads .34
7.4 Design situations and load cases .34
7.5 Load calculations.40
7.6 Ultimate limit state analysis.41
8 Control and protection system.47
8.1 General .47
8.2 Control functions .48

8.3 Protection functions .48
8.4 Braking system .49
9 Mechanical systems.50
9.1 General .50
9.2 Errors of fitting.50
9.3 Hydraulic or pneumatic systems.51
9.4 Main gearbox.51
9.5 Yaw system .51
9.6 Pitch system .52
9.7 Protection function mechanical brakes .52
9.8 Rolling bearings.52

61400-1 © IEC:2005 – 3 –
10 Electrical system.53

10.1 General .53

10.2 General requirements for the electrical system .53

10.3 Protective devices.53

10.4 Disconnect devices .53

10.5 Earth system.53

10.6 Lightning protection.54

10.7 Electrical cables.54

10.8 Self-excitation.54

10.9 Protection against lightning electromagnetic impulse .54
10.10 Power quality .54
10.11 Electromagnetic compatibility.55
11 Assessment of a wind turbine for site-specific conditions.55
11.1 General .55
11.2 Assessment of the topographical complexity of the site .55
11.3 Wind conditions required for assessment .56
11.4 Assessment of wake effects from neighbouring wind turbines.57
11.5 Assessment of other environmental conditions .57
11.6 Assessment of earthquake conditions .58
11.7 Assessment of electrical network conditions.59
11.8 Assessment of soil conditions .59
11.9 Assessment of structural integrity by reference to wind data .59
11.10 Assessment of structural integrity by load calculations with reference to site
specific conditions .60
12 Assembly, installation and erection .61
12.1 General .61
12.2 Planning .62
12.3 Installation conditions.62
12.4 Site access.62
12.5 Environmental conditions .62
12.6 Documentation.63
12.7 Receiving, handling and storage.63
12.8 Foundation/anchor systems.63
12.9 Assembly of wind turbine .63

12.10 Erection of wind turbine.63
12.11 Fasteners and attachments .63
12.12 Cranes, hoists and lifting equipment.64
...

IEC 61400-1 ®
Edition 3.1 2014-04
CONSOLIDATED
VERSION
VERSION
CONSOLIDÉE
colour
inside
Wind turbines –
Part 1: Design requirements
Eoliennes –
Partie 1: Exigences de conception

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient plus de 30 000 termes et définitions en
Spécifications techniques, Rapports techniques et autres
anglais et en français, ainsi que les termes équivalents dans
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
15 langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
Plus de 60 000 entrées terminologiques électrotechniques, en
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, anglais et en français, extraites des articles Termes et
comité d’études,…). Elle donne aussi des informations sur les Définitions des publications IEC parues depuis 2002. Plus
projets et les publications remplacées ou retirées. certaines entrées antérieures extraites des publications des

CE 37, 77, 86 et CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 61400-1 ®
Edition 3.1 2014-04
CONSOLIDATED
VERSION
VERSION
CONSOLIDÉE
colour
inside
Wind turbines –
Part 1: Design requirements
Eoliennes –
Partie 1: Exigences de conception

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.180 ISBN 978-2-8322-2262-1

IEC 61400-1 ®
Edition 3.1 2014-04
REDLINE VERSION
VERSION REDLINE
colour
inside
Wind turbines –
Part 1: Design requirements
Eoliennes –
Partie 1: Exigences de conception

– 2 – IEC 61400-1:2005
+AMD1:2010 CSV  IEC 2014
CONTENTS
FOREWORD . 5

INTRODUCTION . 7

1 Scope . 8

2 Normative references . 8

3 Terms and definitions . 9

4 Symbols and abbreviated terms . 17

4.1 Symbols and units . 17
4.2 Abbreviations . 19
5 Principal elements . 20
5.1 General . 20
5.2 Design methods . 20
5.3 Safety classes . 20
5.4 Quality assurance . 20
5.5 Wind turbine markings . 21
6 External conditions . 21
6.1 General . 21
6.2 Wind turbine classes . 21
6.3 Wind conditions . 23
6.4 Other environmental conditions . 31
6.5 Electrical power network conditions . 33
7 Structural design . 33
7.1 General . 33
7.2 Design methodology . 33
7.3 Loads . 33
7.4 Design situations and load cases . 34
7.5 Load calculations . 39
7.6 Ultimate limit state analysis . 40
8 Control and protection system . 47
8.1 General . 47
8.2 Control functions . 47

8.3 Protection functions . 48
8.4 Braking system . 49
9 Mechanical systems . 49
9.1 General . 49
9.2 Errors of fitting . 49
9.3 Hydraulic or pneumatic systems . 50
9.4 Main gearbox . 50
9.5 Yaw system . 50
9.6 Pitch system . 51
9.7 Protection function mechanical brakes . 51
9.8 Rolling bearings . 51
10 Electrical system . 52
10.1 General . 52

+ AMD1:2010 CSV  IEC 2014
10.2 General requirements for the electrical system. 52

10.3 Protective devices . 52

10.4 Disconnect devices . 52

10.5 Earth system . 53

10.6 Lightning protection . 53

10.7 Electrical cables . 53

10.8 Self-excitation . 53

10.9 Protection against lightning electromagnetic impulse . 53

10.10 Power quality . 53

10.11 Electromagnetic compatibility . 54
11 Assessment of a wind turbine for site-specific conditions . 54
11.1 General . 54
11.2 Assessment of the topographical complexity of the site . 54
11.3 Wind conditions required for assessment . 55
11.4 Assessment of wake effects from neighbouring wind turbines . 56
11.5 Assessment of other environmental conditions . 56
11.6 Assessment of earthquake conditions . 57
11.7 Assessment of electrical network conditions . 58
11.8 Assessment of soil conditions . 58
11.9 Assessment of structural integrity by reference to wind data . 58
11.10 Assessment of structural integrity by load calculations with reference to si
...