ISO/IEC 30140-3:2018

Information technology - Underwater Acoustic Sensor Network (UWASN) - Part 3: Entities and interfaces

ISO/IEC 30140-3:2018 The 30140 series provides general requirements, reference architecture and high-level interface guidelines supporting interoperability among underwater acoustic sensor networks (UWASNs). Part 3 provides descriptions for the entities and interfaces of the UWASN reference architecture.

General Information

• Status: Published
• Publication Date: 24-Jul-2018
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 35.110 - Networking
• Technical Committee: ISO/IEC JTC 1/SC 41 - Internet of Things and Digital Twin
• Current Stage: PPUB - Publication issued
• Start Date: 03-Aug-2018
• Completion Date: 25-Jul-2018

Standards Content (Sample)

ISO/IEC 30140-3
Edition 1.0 2018-07
INTERNATIONAL
STANDARD
Information technology – Underwater Acoustic Sensor Network (UWASN) –
Part 3: Entities and interfaces

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about
ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
below or your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
ISO/IEC 30140-3
Edition 1.0 2018-07
INTERNATIONAL
STANDARD
Information technology – Underwater Acoustic Sensor Network (UWASN) –

Part 3: Entities and interfaces

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 35.110 ISBN 978-2-8322-5912-2

– 2 – ISO/IEC 30140-3:2018 © ISO/IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Abbreviated terms . 6
5 Overview . 7
6 UWASN entities . 7
6.1 UWASN physical entities. 7
6.1.1 General . 7
6.1.2 UWASN domain physical entities . 8
6.1.3 Network domain physical entities . 8
6.1.4 Application domain physical entities . 9
6.2 UWASN functional entities . 9
6.2.1 General . 9
6.2.2 UWA-APS entities . 10
6.2.3 UWA-BUN entities . 10
6.2.4 UWA-NWK entities. 10
6.2.5 UWA-DL entities . 11
6.2.6 UWA-PHY entities . 11
6.2.7 UWA-Cross layer entities . 11
7 UWASN interfaces . 12
7.1 Overview. 12
7.2 Interfaces between UWASN physical entities . 12
7.2.1 Overview . 12
7.2.2 Interface 1 – User / UWA-GW . 14
7.2.3 Interface 2 – UWA-GW / Relay node . 15
7.2.4 Interface 3 – Relay node / UWA-SNode . 15
7.2.5 Interface 4 – Between UWA-SNodes. 16
7.2.6 Interface 5 – UWA-SNode / UWA-GW . 17
7.3 Interfaces between UWASN functional entities . 17
7.3.1 Interface – UWA-PHY / DL . 17
7.3.2 Interface – UWA-DL / NWK . 18
7.3.3 Interface – UWA-NWK / BUN . 18
7.3.4 Interface – UWA-BUN / APS . 19
7.3.5 Interface – UWA-CLM / APS/BUN/NWK/DL/PHY . 19
7.4 Interfaces between functional layers enabling UWASN services . 19
Bibliography . 21

Figure 1 – Interfaces between UWASN functional layers and functional entities . 9
Figure 2 – Overview of interfaces enabling UWASN services . 12
Figure 3 – Interfaces between physical entities . 13
Figure 4 – Functional view of interfaces between the physical entities . 14
Figure 5 – Information exchange via interface 1 . 14
Figure 6 – Information exchange between different layers via interface 2 . 15

Figure 7 – Information exchange in different layers via interface 3 . 16
Figure 8 – Information exchange in different layers via interface 4 . 16
Figure 9 – Information exchange in different layers via interface 5 . 17
Figure 10 – Service access point provided by the UWA-PHY / DL . 18
Figure 11 – Service access point provided by the UWA-DL / NWK . 18
Figure 12 – Service access point provided by the UWA-NWK / BUN . 18
Figure 13 – Service access point provided by the UWA-BUN/APS . 19
Figure 14 – Service access point provided by the UWA-CLM / APS/BUN/NWK/DL/PHY . 19

Table 1 – UWASN domain physical entities . 8
Table 2 – Network domain physical entities. 8
Table 3 – Interfaces between functional layers enabling UWASN services . 20

– 4 – ISO/IEC 30140-3:2018 © ISO/IEC 2018
INFORMATION TECHNOLOGY –
UNDERWATER ACOUSTIC SENSOR NETWORK (UWASN) –

Part 3: Entities and interfaces
FOREWORD
1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have
established a joint technical committee, ISO/IEC JTC 1.
2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC National Committees and ISO member bodies.
3) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and are accepted
by IEC National Committees and ISO member bodies in that sense. While all reasonable efforts are made to
ensure that the technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held
responsible for the way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees and ISO member bodies undertake to
apply IEC, ISO and ISO/IEC publications transparently to the maximum extent possible in their national and
regional publications. Any divergence between any ISO, IEC or ISO/IEC publication and the corresponding
national or regional publication should be clearly indicated in the latter.
5) ISO and IEC do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. ISO or IEC are not responsible
for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts
and members of their technical committees and IEC National Committees or ISO member bodies for any
personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for
costs (including legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC
publication or any other IEC, ISO or ISO/IEC publications.
8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this ISO/IEC publication may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 30140-3 was prepared by subcommittee 41: Internet of Things
and related technologies, of ISO/IEC joint technical committee 1: Information technology.
The list of all currently available parts of the ISO/IEC 30140 series, under the general title
Information technology – Underwater acoustic sensor network (UWASN), can be found on the
IEC and ISO websites.
This International Standard has been approved by vote of the member bodies, and the voting
results may be obtained from the address given on the second title page.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A bilingual version of this publication may be issued at a later date.

INTRODUCTION
Water covers approximately 71 % of the surface of the Earth. Modern technologies introduce
new methods to monitor the body of water, for example pollution monitoring and detection.
Underwater data gathering techniques require exploring the water environment, which can be
most effectively performed by underwater acoustic sensor networks (UWASNs). Applications
developed for the UWASNs can record underwater climate, detect and control water pollution,
monitor marine biology, discover natural resources, detect pipeline leakages, monitor and
locate underwater intruders, perform strategic surveillance, and so on.
The ISO/IEC 30140 series provides general requirements, reference architecture (RA)
including the en
...