Tap-changers - Part 2: Application guidelines

IEC/IEEE 60214-2:2019 is published as an IEC/IEEE Dual Logo standard and is intended to assist in the selection of tap-changers designed in accordance with IEC 60214-1 or IEEE Std C57.131 for use in conjunction with the tapped windings of transformers or reactors. Requirements, references and definitions relevant to either IEC 60214-1 or IEEE Std C57.131 are given and their use is described in Clause 4. It is also intended to assist in understanding the various types of tap-changers and their associated equipment available. These application guidelines cover on-load tap-changers (resistor and reactor types) and de-energized tap-changers. This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) title has been updated from "Application guide" to "Application guidelines";
b) tap-changers for gas-filled transformers have been added;
c) description of typical circuits for regulation has been added;
d) description of basic arrangements of tapped windings with on-load tap-changers and de-energized tap-changers has been added;
e) types of tap-changers are explained in more detail (e.g. vacuum type on-load tap-changer) and new types have been added (e.g. step-voltage regulator, advance retard switch (ARS), on-load tap-changers for distribution transformers);
f) selection of tap-changers (on-load and de-energized) are described in more detail with respect to applications and parameters, which have to be considered (e.g. current wave shapes, operating pressure, temperature conditions, overloading conditions, continuous consecutive operations);
g) storage and installation has been considered;
h) field service, including commissioning, operation, maintenance and monitoring, has been considered;
i) safety aspects have been updated.
Keywords: tap-changers

General Information

Status
Published
Publication Date
13-Jun-2019
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
26-Apr-2019
Completion Date
14-Jun-2019
Ref Project

Relations

Buy Standard

Standard
IEC/IEEE 60214-2:2019 - Tap-changers - Part 2: Application guidelines
English language
83 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC/IEEE 60214-2 ®
Edition 2.0 2019-06
INTERNATIONAL
STANDARD
TAP-changers –
Part 2: Application guidelines

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing being
secured. Requests for permission to reproduce should be addressed to either IEC at the address below or IEC’s
member National Committee in the country of the requester or from IEEE.

IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
3, rue de Varembé 3 Park Avenue
CH-1211 Geneva 20 New York, NY 10016-5997
Switzerland United States of America
Tel.: +41 22 919 02 11 stds.ipr@ieee.org
info@iec.ch www.ieee.org
www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About the IEEE
IEEE is the world’s largest professional association dedicated to advancing technological innovation and excellence for the
benefit of humanity. IEEE and its members inspire a global community through its highly cited publications, conferences,
technology standards, and professional and educational activities.

About IEC/IEEE publications
The technical content of IEC/IEEE publications is kept under constant review by the IEC and IEEE. Please make sure that
you have the latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and Definitions clause of IEC
publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or need CISPR.

further assistance, please contact the Customer Service

Centre: sales@iec.ch.
IEC/IEEE 60214-2 ®
Edition 2.0 2019-06
INTERNATIONAL
STANDARD
TAP-changers –
Part 2: Application guidelines

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.180 ISBN 978-2-8322-6722-6

– 2 – IEC/IEEE 60214-2:2019 © IEC/IEEE 2019
CONTENTS
FOREWORD . 7
INTRODUCTION . 10
1 Scope . 11
2 Normative references . 11
2.1 IEC references . 11
2.2 IEEE references . 12
3 Terms, definitions and abbreviated terms . 12
3.1 Terms and definitions . 12
3.2 Abbreviated terms . 13
4 Use of normative references . 13
5 Application of tap-changers for transformers and reactors . 14
5.1 General . 14
5.2 Typical circuits for regulation . 14
5.3 Basic arrangements of tapped windings with on-load tap-changers . 16
5.4 Basic arrangements of tapped windings with step-voltage regulator on-load
tap-changers . 17
5.5 Basic arrangements of tapped windings with de-energized tap-changers . 17
5.5.1 Bridging contact scheme for DETC . 17
5.5.2 Linear contact scheme for DETC . 18
5.5.3 WYE (star) contact scheme for DETC . 18
5.5.4 Most common basic arrangements for different combinations . 18
6 Types of tap-changers . 19
6.1 On-load tap-changers (OLTCs) . 19
6.1.1 General . 19
6.1.2 Principles of operation . 20
6.1.3 Physical layouts . 27
6.2 De-energized tap-changers (DETCs) . 32
6.2.1 General . 32
6.2.2 Types of DETC . 32
6.2.3 Location of DETC in the transformer tank or enclosure . 32
6.3 Tap-changer environment . 34
6.3.1 Liquid immersed tap-changers . 34
6.3.2 Dry-type tap-changers (OLTC and DETC) . 35
6.3.3 Gas-immersed tap-changers (SF -insulated tap-changers) . 36
6.4 Other types . 38
6.4.1 General . 38
6.4.2 Electronic tap-changers . 38
6.4.3 Step-voltage regulators . 38
6.4.4 Advance retard switch (ARS) . 38
6.4.5 OLTCs for distribution transformers . 39
7 On-load tap-changers . 39
7.1 General . 39
7.2 Selection of OLTCs . 39
7.2.1 Basic parameters . 39
7.2.2 Additional data. 45
7.3 Application of OLTCs . 45

7.3.1 General . 45
7.3.2 OLTCs for application in special transformers with non-sinusoidal
currents (HVDC, rectifier transformers, converter transformers, etc.) . 45
7.3.3 OLTCs for PSTs . 46
7.3.4 OLTCs for arc furnace transformers . 47
7.3.5 OLTCs for shunt reactors . 47
7.3.6 OLTCs for series reactors . 48
7.3.7 OLTCs for unit auxiliary transformers. 48
7.3.8 OLTCs for railway supply transformers . 48
7.3.9 Transformers and phases out-of-step condition . 48
7.4 Other important parameters for OLTCs . 49
7.4.1 Current wave shapes other than sinusoidal . 49
7.4.2 Operating pressure . 49
7.4.3 Operational life of breaking and making contacts . 50
7.4.4 Tap-changer mechanical life . 51
7.4.5 Motor-drive mechanism . 51
7.4.6 Pressure and vacuum test . 51
7.4.7 Temperature conditions . 52
7.4.8 Overloading conditions . 52
7.4.9 Continuous consecutive operations . 53
7.4.10 Preventive autotransformer circuit (reactor type tap-changer only) . 53
8 De-energized tap-changers. 54
8.1 General . 54
8.2 Selection of DETCs . 54
8.2.1 Currents . 54
8.2.2 Rated step voltage . 55
8.2.3 Insulation level . 55
8.2.4 Number of tap positions . 55
8.3 Application of DETCs . 55
8.3.1 General . 55
8.3.2 Frequencies . 55
8.3.3 Application involving non-sinusoidal currents (HVDCs, rectifier
transformers, converter transformers, etc.) . 56
8.3.4 DETCs for arc furnace transformers and other high load cycle
applications . 56
8.3.5 DETCs for peaking pulsing loads . 56
8.4 Other important parameters for DETCs . 56
8.4.1 Tap-changer mechanical life . 56
8.4.2 Motor-drive . 56
8.4.3 Paralleling de-energized tap-changers/current splitting . 56
9 Protective devices for OLTCs . 57
9.1 General . 57
9.2 Increase of pressure within diverter or selector switch liquid compartments . 58
9.2.1 General . 58
9.2.2 Liquid flow controlled relay . 58
9.2.3 Overpressure relay . 58
9.2.4 Sudden pressure relay . 59
9.2.5 Pressure relief device . 59
9.3 Increase of pressure within a diverter or selector switch in SF . 59
– 4 – IEC/IEEE 60214-2:2019 © IEC/IEEE 2019
9.3.1 General . 59
9.3.2 Pressure gauge (compound gauge) . 59
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.