IEC 61158-6:2003
(Main)Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification
Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application layer protocol specification
This part of IEC 61158 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the three-layer Fieldbus Reference Model, which is based in part on the Basic Reference Model for Open Systems Interconnection. Both Reference Models subdivide the area of standardisation for interconnection into a series of layers of specification, each of manageable size. This standard describes the Fieldbus Application Layer (FAL) protocol that defines the information interchange and the interactions between Application Entity invocations (AE-Is) to support the Application Services. The Application Protocol provides the Application Service by making use of the services available from the Data Link Layer or other immediately lower layer. The contents of the corrigendum of July 2004 have been included in this copy.
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL IEC
STANDARD
61158-6
Third edition
2003-05
Digital data communications
for measurement and control –
Fieldbus for use in industrial
control systems –
Part 6:
Application layer protocol specification
Reference number
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (http://www.iec.ch/searchpub/cur_fut.htm)
enables you to search by a variety of criteria including text searches, technical
committees and date of publication. On-line information is also available on
recently issued publications, withdrawn and replaced publications, as well as
corrigenda.
• IEC Just Published
This summary of recently issued publications (http://www.iec.ch/online_news/
justpub/jp_entry.htm) is also available by email. Please contact the Customer
Service Centre (see below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
INTERNATIONAL IEC
STANDARD 61158-6
Third edition
2003-05
Digital data communications
for measurement and control –
Fieldbus for use in industrial
control systems –
Part 6:
Application layer protocol specification
© IEC 2003 – Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
XH
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue
– 2 – 61158-6 IEC:2003(E)
CONTENTS
FOREWORD.32
0 Introduction.34
1 Scope .36
2 Normative references.37
3 Terms and definitions.38
3.1 Summary.38
3.2 Terms and definitions from other ISO/IEC standards .38
3.3 Terms and definitions from IEC 61158-5.39
3.4 Other terms and definitions.39
3.5 Abbreviations and symbols .49
3.6 Conventions .53
3.7 Conventions used in state machines.61
4 Type 1 .68
4.1 FAL syntax description .68
4.2 Transfer syntaxes.107
4.3 FAL protocol state machines structure.132
4.4 AP-Context state machine .134
4.5 FAL Service Protocol Machine (FSPM) .151
4.6 Application Relationship Protocol Machines (ARPMs).157
4.7 DLL Mapping Protocol Machine (DMPM) .298
4.8 Protocol options .312
5 Type 2 . 316
5.1 Abstract syntax.316
5.2 Transfer syntax .390
5.3 Structure of FAL protocol state machines .402
5.4 Context state machine.402
5.5 FAL Service Protocol Machine (FSPM) .402
5.6 Application Relationship Protocol Machines (ARPMs).408
5.7 DLL Mapping Protocol Machine (DMPM) .492
5.8 Alternate DLL mapping protocol machine.496
6 Type 3 . 502
6.1 FAL syntax description .502
6.2 Transfer syntax .506
6.3 FAL protocol state machines .553
6.4 AP-Context state machine .567
6.5 FAL Service Protocol Machines (FSPMs) .567
6.6 Application Relationship Protocol Machines (ARPMs).650
6.7 DLL Mapping Protocol Machines (DMPMs) .791
6.8 Parameters for a DP-slave.827
7 Type 4 . 828
7.1 FAL syntax description .828
7.2 Transfer syntaxes.830
7.3 FAL Protocol State Machines.837
7.4 AP-Context State Machine.838
7.5 FAL Service Protocol Machine (FSPM) .838
61158-6 IEC:2003(E) – 3 –
7.6 Application Relationship Protocol Machine (ARPM) .843
7.7 DLL Mapping Protocol Machine (DMPM) .846
7.8 Protocol options .849
8 Type 5 . 850
8.1 Overview .850
8.2 FAL Syntax Description .850
8.3 Transfer syntax .850
8.4 FAL Protocol State Machine Structure .899
8.5 SMK State Machine .899
8.6 VCR State Machine .914
8.7 FAL Service Protocol Machine (FSPM) .915
8.8 Application Relationship Protocol Machines (ARPMs).916
8.9 DLL Mapping Protocol Machine (DMPM) .930
9 Type 6 . 936
9.1 Reference.936
9.2 Usage of Parameters.936
9.3 AP Context State Tables .936
9.4 Application Relationship protocol machines (ARPMs) .936
9.5 DLL Mapping protocol machine (DMPM).952
10 Type 7 . 962
10.1 Abstract syntax of data type .962
10.2 Transfer Syntaxes .967
10.3 Structure of Protocol Machines. 1027
10.4 AP-Context state machine . 1028
10.5 Sub-MMS FAL Service Protocol Machine (FSPM). 1028
10.6 DLL Mapping Protocol Machine (DMPM) and Association Relationship
Protocol Machine (ARPM ) . 1033
10.7 Protocol options . 1081
11 Type 8 . 1101
11.1 FAL Syntax Description . 1101
11.2 Transfer Syntax . 1110
11.3 Protocol Machine Overview . 1118
11.4 AP-Context State Machine. 1119
11.5 FAL Service Protocol Machine (FSPM) . 1119
11.6 Application Relationship Protocol Machines (ARPMs). 1119
11.7 DLL Mapping Protocol Machine . 1128
12 Type 9 . 1139
12.1 FAL syntax description . 1139
12.2 Transfer Syntax . 1158
12.3 FAL Protocol State Machines Structure . 1167
12.4 VCR PM State Machine . 1170
12.5 AREP State Machines . 1182
13 Type 10. 1230
13.1 FAL Syntax Description . 1230
13.2 Transfer Syntax . 1247
13.3 FAL Protocol State Machines. 1247
– 4 – 61158-6 IEC:2003(E)
13.4 AP Context State Machine. 1248
13.5 FAL Service Protocol Machines (FSPM) . 1248
13.6 Application Relationship Protocol Machine (ARPM) . 1303
13.7 DLL Mapping Protocol Machine (DMPM) . 1306
13.8 Protocol Options. 1309
Figure 1 – Relationship of IEC 61158-6 to other fieldbus layers and to users of the
fieldbus Application service.34
Figure 2 – Attribute table format and terms .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.