Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans

IEC 60364-7-721:2017 lays down particular requirements applying to electrical circuits and equipment intended for the use of the caravan for habitation purposes. This new edition includes the following significant technical changes with respect to the previous edition:
- a minimum height of not less than 500 mm above the base of the cylinders is now required for cables passing through the gas cylinder compartment;
- it is now required that each independent installation shall be provided with its own main isolating switch which shall disconnect all live conductors and which shall be suitably placed in a readily accessible location in the caravan.

Installations électriques à basse tension - Partie 7-721: Exigences pour les installations ou emplacements spéciaux - Installations électriques dans les caravanes et caravanes à moteur

IEC 60364-7-721:2017 s’applique aux circuits et matériels électriques des caravanes destinées à des fins de logement. Elles ne s’appliquent pas aux circuits et matériels électriques destinés à la propulsion. Elles ne s’appliquent pas aux installations électriques intérieures des maisons d’habitation mobiles, des caravanes résidentielles fixes et des unités transportables.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) Une hauteur minimale supérieure ou égale à 500 mm au-dessus de la base des bombonnes est désormais exigée pour les câbles passant par le compartiment contenant la bombonne de gaz.
b) Il est désormais exigé que chaque installation indépendante soit fournie avec son dispositif général de sectionnement qui doit déconnecter tous les conducteurs actifs et qui doit être placé de façon appropriée et accessible dans la caravane.
c) La numérotation des articles relatifs aux mesures de protection non autorisées (obstacles, mise hors de portée, emplacements non conducteurs, liaison équipotentielle non reliée) a changé.

General Information

Status
Published
Publication Date
14-Jun-2017
Current Stage
PPUB - Publication issued
Start Date
30-Jun-2017
Completion Date
15-Jun-2017
Ref Project

Relations

Buy Standard

Standard
IEC 60364-7-721:2017 - Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans Released:6/15/2017 Isbn:9782832244258
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 60364-7-721:2017 - Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans
English and French language
51 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60364-7-721 ®
Edition 2.0 2017-06
INTERNATIONAL
STANDARD
Low-voltage electrical installations –
Part 7-721: Requirements for special installations or locations – Electrical
installations in caravans and motor caravans

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 60364-7-721 ®
Edition 2.0 2017-06
INTERNATIONAL
STANDARD
Low-voltage electrical installations –

Part 7-721: Requirements for special installations or locations – Electrical

installations in caravans and motor caravans

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.020; 91.140.50 ISBN 978-2-8322-4425-8

– 2 – IEC 60364-7-721:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
721 Electrical installations in caravans and motor caravans . 7
721.1 Scope . 7
721.2 Normative references . 7
721.3 Terms and definitions . 8
721.31 Purposes, supplies and structure . 8
721.313 Supplies . 8
721.4 Protection for safety . 9
721.41 Protection against electric shock . 9
721.411 Protective measure: automatic disconnection of supply . 9
721.413 Protective measure: electrical separation . 9
721.414 Protective measure: extra-low voltage provided by SELV and PELV . 9
721.415 Additional protection . 9
721.43 Protection against overcurrent . 10
721.5 Selection and erection of equipment . 10
721.51 Common rules . 10
721.510 Introduction . 10
721.512 Operational conditions and external influences . 10
721.514 Identification . 10
721.52 Wiring systems . 10
721.521 Types of wiring systems . 10
721.522 Selection and erection of wiring systems in relation to external
influences . 11
721.524 Cross-sectional areas of conductors . 11
721.526 Electrical connections . 11
721.528 Proximity of wiring systems to other services . 11
721.53 Isolation, switching and control . 12
721.536 Isolation and switching . 12
721.54 Earthing arrangements and protective conductors . 12
721.543 Protective conductors . 12
721.55 Other equipment . 12
Annex A (normative) Instructions for electricity supply . 14
Annex B (informative) Extra low-voltage DC installations . 15
Annex C (informative) Current-carrying capacities . 21
Annex D (informative) List of notes concerning certain countries . 24
Bibliography . 25

Figure C.721.1 – Graph for obtaining minimum cross-sectional area for conductors for
fixed wiring installations with a voltage drop of 0,8 V . 21
Figure C.721.2 – Graph for obtaining minimum cross-sectional area for conductors for
battery cable installations with a voltage drop of 0,3 V . 22

Table 721.1 – Cross-sectional areas of flexible cords and cables for caravan
connection . 13
Table B.721.1 – Functional allocation and cross-sectional areas of cores for caravan
connectors . 18

– 4 – IEC 60364-7-721:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –

Part 7-721: Requirements for special installations or locations –
Electrical installations in caravans and motor caravans

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60364-7-721 has been prepared by IEC technical committee 64:
Electrical installations and protection against electrical shock.
This second edition cancels and replaces the first edition published in 2007. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) A minimum height of not less than 500 mm above the base of the cylinders is now required
for cables passing through the gas cylinder compartment. Where cables have to run
through a compartment such cables shall be protected against mechanical damage by
installation within a continuous conduit or duct passing through the compartment
(721.528.3.1).
b) It is now required that each independent installation shall be provided with its own main
isolating switch which shall disconnect all live conductors and which shall be suitably
placed in a readily accessible location in the caravan.(721.536.2.1.1)
c) The clause numbers for the protective measures not permitted (obstacles, placing out of
reach, non-conducting locations and earth-free local equipotential bonding) have been
changed.
The text of this International Standard is based on the following documents:
FDIS Report on voting
64/2200/FDIS 64/2210/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 60364 series, published under the general title Low-voltage
electrical installations, can be found on the IEC website.
The reader's attention is drawn to the fact that Annex D lists all of the “in-some-country”
clauses on differing practices of a less permanent nature relating to the subject of this
standard.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this
...


IEC 60364-7-721 ®
Edition 2.0 2017-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –
Part 7-721: Requirements for special installations or locations – Electrical
installations in caravans and motor caravans

Installations électriques à basse tension –
Partie 7-721: Exigences pour les installations ou emplacements spéciaux –
Installations électriques dans les caravanes et caravanes à moteur

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60364-7-721 ®
Edition 2.0 2017-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage electrical installations –

Part 7-721: Requirements for special installations or locations – Electrical

installations in caravans and motor caravans

Installations électriques à basse tension –

Partie 7-721: Exigences pour les installations ou emplacements spéciaux –

Installations électriques dans les caravanes et caravanes à moteur

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.020; 91.140.50 ISBN 978-2-8322-7406-4

– 2 – IEC 60364-7-721:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
721 Electrical installations in caravans and motor caravans . 7
721.1 Scope . 7
721.2 Normative references . 7
721.3 Terms and definitions . 8
721.31 Purposes, supplies and structure . 8
721.313 Supplies . 8
721.4 Protection for safety . 9
721.41 Protection against electric shock . 9
721.411 Protective measure: automatic disconnection of supply . 9
721.413 Protective measure: electrical separation . 9
721.414 Protective measure: extra-low voltage provided by SELV and PELV . 9
721.415 Additional protection . 9
721.43 Protection against overcurrent . 10
721.5 Selection and erection of equipment . 10
721.51 Common rules . 10
721.510 Introduction . 10
721.512 Operational conditions and external influences . 10
721.514 Identification . 10
721.52 Wiring systems . 10
721.521 Types of wiring systems . 10
721.522 Selection and erection of wiring systems in relation to external
influences . 11
721.524 Cross-sectional areas of conductors . 11
721.526 Electrical connections . 11
721.528 Proximity of wiring systems to other services . 11
721.53 Isolation, switching and control . 12
721.536 Isolation and switching . 12
721.54 Earthing arrangements and protective conductors . 12
721.543 Protective conductors . 12
721.55 Other equipment . 12
Annex A (normative) Instructions for electricity supply . 14
Annex B (informative) Extra low-voltage DC installations . 15
Annex C (informative) Current-carrying capacities . 21
Annex D (informative) List of notes concerning certain countries . 24
Bibliography . 25

Figure C.721.1 – Graph for obtaining minimum cross-sectional area for conductors for
fixed wiring installations with a voltage drop of 0,8 V . 21
Figure C.721.2 – Graph for obtaining minimum cross-sectional area for conductors for
battery cable installations with a voltage drop of 0,3 V . 22

Table 721.1 – Cross-sectional areas of flexible cords and cables for caravan
connection . 13
Table B.721.1 – Functional allocation and cross-sectional areas of cores for caravan

connectors . 18

– 4 – IEC 60364-7-721:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE ELECTRICAL INSTALLATIONS –

Part 7-721: Requirements for special installations or locations –
Electrical installations in caravans and motor caravans

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative ref
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.