IEC 60811-506:2012
(Main)Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
IEC 60811-506:2012 gives the procedure for performing impact tests at low temperature on extruded insulations and sheaths. IEC 60811-506:2012 cancels and replaces 8.5 of IEC 60811-1-4:1985, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012.
This publication is to be read in conjunction with IEC 60811-100:2012.
Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 506: Essais mécaniques - Essai de choc à basse température pour les enveloppes isolantes et les gaines
La CEI 60811-506:2012 décrit la procédure à suivre pour réaliser les essais de choc à basse température sur les enveloppes isolantes et gaines extrudées. La CEI 60811-506:2012 annule et remplace 8.5 de la CEI 60811-1-4:1985, qui est supprimée. L'ensemble des détails relatifs aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012.
Cette publication doit être lue conjointement avec la CEI 60811-100:2012.
Alarm systems - Part 5: Requirements for alarm transmission systems - Section 1: General requirements for systems
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST IEC 60839-5-1:2002
01-junij-2002
Alarm systems - Part 5: Requirements for alarm transmission systems - Section 1:
General requirements for systems
Alarm systems - Part 5: Requirements for alarm transmission systems - Section 1:
General requirements for systems
Systèmes d'alarme - Partie 5: Prescriptions pour les systèmes de transmission d'alarme
- Section 1: Prescriptions générales pour les systèmes
Ta slovenski standard je istoveten z: IEC 60839-5-1
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
SIST IEC 60839-5-1:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST IEC 60839-5-1:2002
---------------------- Page: 2 ----------------------
SIST IEC 60839-5-1:2002
NORME CEI
INTERNATIONALE IEC
60839-5- 1
INTERNATIONAL
Première édition
STANDARD
First edition
1991-04
Systèmes d'alarme
Partie 5:
Prescriptions pour
les systèmes de transmission
d'alarme
Section 1: Prescriptions générales pour les systèmes
Alarm systems
Part 5:
Requirements for alarm transmission systems
Section 1: General requirements for systems
© IEC 1991 Droits de reproduction réservés
— Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun
any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur.
writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
IEC McHvayHaponHae GnewrporeXHH4ecKaR
HOMHCCHn
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue
---------------------- Page: 3 ----------------------
SIST IEC 60839-5-1:2002
839-5-1 © IEC – 3 –
CONTENTS
Page
FOREWORD 5
Clause
1 Scope 7
2 Normative references 7
3 Definitions 7
4 General considerations 11
5 Requirements 13
6 Test methods 23
FIGURES 28
---------------------- Page: 4 ----------------------
SIST IEC 60839-5-1:2002
IEC – 5 –
839-5-1 ©
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ALARM SYSTEMS
Part 5: Requirements for alarm transmission systems
Section 1: General requirements for systems
FOREWORD
The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
1)
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National
2)
Committees in that sense.
In order to promote international unification, the IEC expresses the wish that all National Committees
3)
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
tter.
far as possible, be clearly indicated in the la
This section of the International Standard IEC 839-5 has been prepared by the IEC
Technical Committee No. 79: Alarm systems.
The text of this standard is based on the following documents:
Report on Voting
Report on Voting Two Months' Procedure
Six Months' Rule
79(00)47
79(CO)30 79(CO)37
79(CO)20
Full information on the voting for the approval of this section can be found in the Voting
Reports indicated in the above table.
---------------------- Page: 5 ----------------------
SIST IEC 60839-5-1:2002
839-5-1 © IEC - 7 -
ALARM SYSTEMS
Part 5: Requirements for alarm transmission systems
Section 1: General requirements for systems
1 Scope
This section of IEC 839-5 specifies the general requirements for the performance, re-
liability and security characteristics of alarm transmission systems.
It covers the general requirements for connections providing signalling between an alarm
system and an alarm receiving centre.
Additional requirements for specific alarm transmission systems are given in separate
sections as parts of IEC 839-5. This does not preclude the use of any transmission system
not - covered by one of these specific sections, provided that it meets these general
requirements.
This section does not specify the method of display of information and the installation of
equipment.
2 Normative references
The following standard contains provisions which, through reference in this text, constitute
provisions of this section of IEC 839-5. At the time of publication, the edition indicated was
valid. All standards are subject to revision,
...
IEC 60811-506
®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric and optical fibre cables – Test methods for non-metallic materials –
Part 506: Mechanical tests – Impact test at low temperature for insulations
and sheaths
Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux
non-métalliques –
Partie 506: Essais mécaniques – Essai de choc à basse température pour les
enveloppes isolantes et les gaines
IEC 60811-506:2012
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2012 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
---------------------- Page: 2 ----------------------
IEC 60811-506
®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.