IEC 62505-3-1:2020
(Main)Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 3-1: Measurement, control and protection devices for specific use in AC tractions systems - Devices
Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 3-1: Measurement, control and protection devices for specific use in AC tractions systems - Devices
IEC 62505-3-1:2020 is applicable to new low voltage devices for measurement, control and protection which are:
- for indoor or outdoor fixed installations in traction systems, and
- operated in conjunction with high voltage equipment with an AC line voltage and frequency as specified in IEC 60850.
This document also applies to measurement, control and protective devices other than low voltage devices and not covered by a specific railway product standard as far as reasonably possible. Requirements of this document prevail.
This second edition cancels and replaces the first edition published in 2009. This edition includes the following significant technical changes with respect to the previous edition:
- distinguish between requirements and application guides
- include requirements on devices for example control and protection relays not included before;
- remove parts already included in other standards, for example EN 50633 for protection principles, which is intended to become an IEC standard.
Applications ferroviaires - Installations fixes - Exigences particulières pour appareillage à courant alternatif - Partie 3-1: Dispositifs de mesure, de commande et de protection pour usage spécifique dans les systèmes de traction à courant alternatif - Dispositifs
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 62505-3-1 ®
Edition 2.0 2020-03
INTERNATIONAL
STANDARD
Railway applications – Fixed installations – Particular requirements for
AC switchgear –
Part 3-1: Measurement, control and protection devices for specific use
in AC traction systems – Devices
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62505-3-1 ®
Edition 2.0 2020-03
INTERNATIONAL
STANDARD
Railway applications – Fixed installations – Particular requirements for
AC switchgear –
Part 3-1: Measurement, control and protection devices for specific use
in AC traction systems – Devices
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 45.060.01 ISBN 978-2-8322-7846-8
– 2 – IEC 62505-3-1:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Specific requirements from the traction system . 8
5 Requirements on measurement, control and protection devices . 8
5.1 General . 8
5.2 Voltage detection systems . 8
5.3 Devices at supply voltage of a traction system . 9
5.4 Protection devices . 9
Annex A (informative) Application guide – Measurement principles, particularly
related to the line testing methods . 11
A.1 Overview. 11
A.2 Line testing . 11
A.2.1 General . 11
A.2.2 Line testing methods . 12
A.2.3 Line testing procedures . 13
Annex B (informative) Application guide – Control principles . 15
B.1 Overview. 15
B.2 Closing control . 15
B.2.1 General . 15
B.2.2 Close inhibit. 15
B.2.3 On-command . 16
B.2.4 Auto-reclose . 17
B.3 Opening control . 17
B.3.1 General . 17
B.3.2 Auto-off sequences . 18
B.4 Automated sequences . 19
Bibliography . 21
Figure A.1 – Example of a feeder related line testing based on voltage criterion . 14
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS – FIXED INSTALLATIONS –
PARTICULAR REQUIREMENTS FOR AC SWITCHGEAR –
Part 3-1: Measurement, control and protection devices
for specific use in AC traction systems – Devices
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62505-3-1 has been prepared by IEC technical committee 9:
Electrical equipment and systems for railways.
This second edition cancels and replaces the first edition published in 2009. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– distinguish between requirements, Clauses 4 and 5, and application guides, annexes;
– include requirements on devices for example control and protection relays not included
before;
– remove parts already included in other standards, for example EN 50633 for protection
principles, which is intended to become an IEC standard.
– 4 – IEC 62505-3-1:2020 © IEC 2020
The text of this International Standard is based on the following documents:
FDIS Report on voting
9/2563/FDIS 9/2575/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62505 series, published under the general title Railway
applications – Fixed installations – Particular requirements for AC switchgear, can be found
on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
INTRODUCTION
IEC 62505-3-1 is intended for measurement, control and protection devices for specific use in
AC traction systems other than current and voltage transformers. These are covered by
IEC 62505-3-2 and IEC 62505-3-3 respectively.
This standard covers a large variety of different kinds of equipment used in railway fixed
installations which do not have railway specific product standards. It provides clarification on
how to select ratings and test values relevant for operation in fixed installations. This standard
should be read in conjunction with the relevant product standard of the equipment concerned.
Annex A and Annex B are application guides. Annex A deals with railway specific
measurement principles and Annex B provides guidance on the design of control systems for
AC traction. These application guides identify characteristics of and parameters for
procedures and functions used. Guidance on protection principles is given in EN 50633.
The clause numbering of this part is different to that used in all other parts of the IEC 62505
series. Clause numbering in the other parts is the same as in the specific referenced product
standard.
– 6 – IEC 62505-3-1:2020 © IEC 2020
RAILWAY APPLICATIONS – FIXED INSTALLATIONS –
PARTICULAR REQUIREMENTS FOR AC SWITCHGEAR –
Part 3-1: Measurement, control and protection devices
for specific use in AC traction systems – Devices
1 Scope
This part of IEC 62505 is applicable to new low voltage devices for measurement, control and
protection which are:
– for indoor or outdoor fixed installations in traction systems, and
– operated in conjunction with high voltage equipment with an AC line voltage and
frequency as specified in IEC 60850.
NOTE 1 IEC 60850 specifies the AC traction systems:
15 kV 16,7 Hz,
12 kV 25 Hz,
12,5 kV, 20 kV also 25 kV with 50 Hz and
12,5 kV, 20 kV, 25 kV also 50 kV with 60 Hz.
This document does not provide specific requirements for AC traction systems supplied with a
frequency of 25 Hz or with a nominal voltage of 12,5 kV or 50 kV. Nevertheless, requirements
set out in this d
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.