IEC PAS 62412:2005
(Main)Real-time Ethernet P-NET on IP specification
Real-time Ethernet P-NET on IP specification
consists of paragraphs that are meant to be additional to the definitions and specifications, which are already found in the IEC 61158 series. Following each heading, there will be a reference to which paragraph must be inserted or replaced within the relevant IEC 61158 series.
General Information
Relations
Standards Content (Sample)
PUBLICLY
IEC
AVAILABLE
PAS 62412
SPECIFICATION
First edition
2005-08
Real-time Ethernet P-NET
on IP specification
Reference number
IEC/PAS 62412:2005(E)
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:
Email: custserv@iec.ch
Tel: +41 22 919 02 11
Fax: +41 22 919 03 00
PUBLICLY
IEC
AVAILABLE
PAS 62412
SPECIFICATION
First edition
2005-08
Real-time Ethernet P-NET
on IP specification
IEC 2005 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
U
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue
– 2 – PAS 62412 © IEC:2005 (E)
CONTENTS
FOREWORD.3
INTRODUCTION.4
1 Scope and object.5
2 Normative references .5
3 Conventions .5
4 61158-2 Physical Layer specification .6
4.1 OSI Data Link Layer .6
4.1.1 MAC sublayer .6
4.1.2 LLC sublayer .6
4.2 OSI Network layer .6
4.3 OSI Transport layer .6
5 61158-4 Data Link Layer protocol specification.7
5.1 Terms and definitions .7
5.1.1 P-NET-route .7
5.2 Additions to terms and definitions .7
5.2.1 IPNetTable .7
5.2.2 IPNetID.7
5.2.3 UDP port number .7
5.2.4 Nettype.7
5.2.5 IP Range net.7
5.2.6 UDP Range net.7
5.3 Type 4: Additional symbols and abbreviations .8
5.3.1 Constants, variables, counters and queues.8
5.4 Type 4: Data Link Protocol Definition .8
5.4.2 PhIDU structure and encoding.9
5.4.3 Frame check sequence .10
5.5 Additions to Frame check sequence .11
5.5.2 Common DLPDU structure, encoding and elements of procedure .11
5.6 Additions to P-NET-route field.11
5.7 DLPDU-specific structure, encoding and elements of procedure .13
5.7.2 Request P-NET-route generation.17
5.7.3 DL-route generation .18
6 61158-5 Application Layer service definition.20
7 Addressing conventions for P-NET on IP.25
8 Translation of P-NET address to IP address .27
9 Dynamic clients .28
10 Broadcast / Netcast .28
11 Package format .28
PAS 62412 © IEC:2005 (E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Real-time Ethernet P-NET on IP specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
A PAS is a technical specification not fulfilling the requirements for a standard but made
available to the public.
IEC-PAS 62412 has been processed by subcommittee 65C: Digital communications, of IEC
technical committee 65: Industrial-process measurement and control.
The text of this PAS is based on the This PAS was approved for
following document: publication by the P-members of the
committee concerned as indicated in
the following document
Draft PAS Report on voting
65C/360/NP 65C/376/RVN
Following publication of this PAS, the technical committee or subcommittee concerned will
transform it into an International Standard.
It is intended that the content of this PAS will be incorporated in the future new edition of the
various parts of IEC 61158 series according to the structure of this series.
This PAS shall remain valid for an initial maximum period of three years starting from
2005-08. The validity may be extended for a single three-year period, following which it shall
be revised to become another type of normative document or shall be withdrawn.
– 4 – PAS 62412 © IEC:2005 (E)
INTRODUCTION
The P-NET on IP specification is designed for use in an IP-environment. P-NET on IP enables
use of P-NET (IEC 61158, type 4) real-time communication wrapped into UDP/IP packages.
P-NET packages can be routed through IP-networks in exactly the same way as they can be
routed through non-IP-networks. Routing can be through any type of P-NET network and in
any order.
Nodes on an IP-network are addressed with two P-NET Route elements, but this is entirely
handled by the IP-nodes. This means that any P-NET client (master) can access servers on
an IP-network without knowing anything about IP-addresses.
PAS 62412 © IEC:2005 (E) – 5 –
Real-time Ethernet P-NET on IP specification
1 Scope and object
This PAS consists of paragraphs that are meant to be additional to the definitions and
specifications, which are already found in the IEC 61158 series. Following each heading,
there will be a reference to which paragraph must be inserted or replaced within the relevant
IEC 61158 series.
After the modifications to IEC 61158 series a few descriptions explain how to perform address
conversions and handle dynamic clients.
NOTE These descriptions are more implementation specific and will not be included in the normative parts of the
new standard.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61158-2:2003, Digital data communications for measurement and control – Fieldbus for
use in industrial control systems – Part 2: Physical layer specification and service definition
IEC 61158-4:2003, Digital data communications for measurement and control – Fieldbus for
use in industrial control systems – Part 4: Data link protocol specification
ISO/IEC 8802-3, Information technology – Telecommunications and information exchange
between systems - Local and metropolitan area networks – Specific requirements – Part 3:
Carrier sense multiple access with collision detection (CSMA/CD) access method and
physical layer specifications
RFC 768 (UDP, User Datagram Protocol)
RFC 791 (IP, Internet Protocol)
3 Conventions
This PAS specifies paragraphs that shall either be replaced or added to the IEC 61158 series.
Paragraphs that shall be replaced are indicated with the paragraph number(s) in question as
reference and begin and end with the lines as shown:
----------------------------------- Replace begin --------------------------------
modified text
----------------------------------- Replace end --------------------------------
Paragraphs that shall be added are indicated with first paragraph number(s) to add a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.