IEC 62275:2018
(Main)Cable management systems - Cable ties for electrical installations
Cable management systems - Cable ties for electrical installations
IEC 62275:2018 specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations.
This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) consideration of adhesive fixing devices,
b) revised and updated normative references,
c) modified definitions for metallic and composite cable ties,
d) new definitions,
e) improvement of test procedures,
f) new figures for typical arrangement of test assembly for fixing devices and for integral fixing devices.
Systèmes de câblage - Colliers pour installations électriques
L'IEC 62275:2018 spécifie les exigences pour les colliers métalliques, non métalliques et composites ainsi que pour leurs accessoires de fixation associés, utilisés pour l'aménagement et le soutien des systèmes de câblage dans les installations électriques.
Cette troisième édition annule et remplace la deuxième édition parue en 2013. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) la prise en compte des accessoires de fixation adhésifs,
b) des révisions et mises à jour des références normatives,
c) la modification des définitions relatives aux colliers métalliques et composites,
d) de nouvelles définitions,
e) l'amélioration des procédures d'essai,
f) de nouvelles figures avec des configurations types de l'assemblage d'essai pour les accessoires de fixation et les accessoires de fixation intégrés.
General Information
Relations
Standards Content (Sample)
IEC 62275 ®
Edition 3.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Cable management systems – Cable ties for electrical installations
Systèmes de câblage – Colliers pour installations électriques
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC -
Glossaire IEC - std.iec.ch/glossary
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC et en français, extraites des articles Termes et Définitions des
en utilisant différents critères (numéro de référence, texte, publications IEC parues depuis 2002. Plus certaines entrées
comité d’études,…). Elle donne aussi des informations sur les antérieures extraites des publications des CE 37, 77, 86 et
projets et les publications remplacées ou retirées. CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just Si vous désirez nous donner des commentaires sur cette
Published détaille les nouvelles publications parues. publication ou si vous avez des questions contactez-nous:
Disponible en ligne et aussi une fois par mois par email. sales@iec.ch.
IEC 62275 ®
Edition 3.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Cable management systems – Cable ties for electrical installations
Systèmes de câblage – Colliers pour installations électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.10; 29.120.99 ISBN 978-2-8322-5924-5
– 2 – IEC 62275:2018 © IEC 2018
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General requirements . 8
5 General notes on tests . 8
6 Classification . 13
6.1 According to material . 13
6.1.1 Metallic component . 13
6.1.2 Non-metallic component . 13
6.1.3 Composite component . 13
6.2 According to loop tensile strength for cable ties and mechanical strength for
fixing devices . 13
6.2.1 Loop tensile strength for cable ties . 13
6.2.2 Type 1 – Retains at least 50 % of declared loop tensile strength for
cable ties and mechanical strength for fixing devices after test
conditions . 13
6.2.3 Type 2 – Retains 100 % declared loop tensile strength for cable ties
and mechanical strength for fixing devices after test conditions . 13
6.2.4 According to loop tensile strength and mechanical strength of integral
assemblies . 13
6.3 According to temperature . 14
6.3.1 According to maximum operating temperature for application given in
Table 4 . 14
6.3.2 According to minimum operating temperature for application given in
Table 5 . 14
6.3.3 According to minimum temperature during installation as declared by
the manufacturer . 14
6.4 According to contribution to fire for non-metallic and composite cable ties
and integral assemblies only . 14
6.4.1 Flame propagating . 14
6.4.2 Non-flame propagating . 14
6.5 According to environmental influences . 15
6.5.1 According to resistance to ultraviolet light for non-metallic and
composite components . 15
6.5.2 According to resistance to corrosion for metallic and composite
components . 15
7 Marking and documentation . 15
8 Construction . 17
9 Mechanical properties. 18
9.1 Requirements . 18
9.2 Installation test . 18
9.3 Minimum installation temperature test for cable ties . 18
9.4 Minimum operating temperature test for cable ties . 19
9.5 Loop tensile strength test for cable ties classified according to 6.2.2 . 21
9.5.1 As-received condition . 21
9.5.2 After heat ageing . 21
9.5.3 After temperature cycling . 22
9.6 Loop tensile strength test for cable ties classified according to 6.2.3 . 22
9.6.1 As-received condition . 22
9.6.2 After heat ageing . 22
9.6.3 After temperature cycling . 23
9.6.4 After vibration test for metallic cable ties . 23
9.7 Mechanical strength test for fixing devices and integral assemblies . 25
9.7.1 As-received condition . 25
9.7.2 After heat ageing . 30
9.7.3 After temperature cycling . 31
10 Contribution to fire . 32
11 Environmental influences . 34
11.1 Resistance to ultraviolet light . 34
11.2 Resistance to corrosion . 37
12 Electromagnetic compatibility . 37
Annex A (normative) Compliance checks to be carried out for cable ties and fixing
devices currently complying with IEC 62275:2013 in order to comply with this edition 3 . 38
Bibliography . 40
Figure 1 – Reference thickness for cable ties . 9
Figure 2 – Typical arrangements for cable tie orientation on split mandrel for tensile
test . 12
Figure 3 – Test piston for durability test for marking . 16
Figure 4 – Test apparatus for cable tie impact test . 21
Figure 5 – Typical arrangement for the vibration test . 24
Figure 6 – Typical arrangement of test assembly for fixing devices and for integral
fixing devices . 30
Figure 7 – Arrangement for the needle flame test .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.