IEC 60810:2017
(Main)Lamps, light sources and LED packages for road vehicles - Performance requirements
Lamps, light sources and LED packages for road vehicles - Performance requirements
IEC 60810:2017 is applicable to filament lamps, discharge lamps, LED light sources and LED packages to be used in road vehicles, i.e. in headlamps, fog-lamps, signalling lamps and interior lighting. It is especially applicable to those lamps and light sources which are listed in IEC 60809.
This fifth edition cancels and replaces the fourth edition published in 2014 and Amendment 1:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- update and clarification of the title and scope;
- introduction of new LED light sources;
- introduction of requirements for LED light sources;
- introduction of guidelines on LED package robustness validation for LED packages.
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers - Exigences de performances
IEC 60810:2017 est applicable aux lampes à filament,aux lampes à décharge, aux sources lumineuses à LED et aux LED encapsulées destinées à être utilisées dans les véhicules routiers, c’est-à-dire dans les projecteurs avant, les feux de brouillard, les feux de signalisation et l’éclairage intérieur. Il s’applique particulièrement aux lampes et sources lumineuses figurant dans l’IEC 60809.
Cette cinquième édition annule et remplace la quatrième édition parue en 2014 et l'Amendement 1:2017. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
- actualisation et clarification du titre et du domaine d’application;
- introduction de nouvelles sources lumineuses à LED;
- introduction des exigences applicables aux sources lumineuses à LED;
- introduction de lignes directrices pour la validation de la robustesse des LED encapsulées.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 60810 ®
Edition 5.0 2017-09
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Lamps, light sources and LED packages for road vehicles –
Performance requirements
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 60810 ®
Edition 5.0 2017-09
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Lamps, light sources and LED packages for road vehicles –
Performance requirements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.140.99 ISBN 978-2-8322-4855-3
– 2 – IEC 60810:2017 RLV © IEC 2017
CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 12
4 Requirements and test conditions for filament lamps . 16
4.1 Basic function and interchangeability . 16
4.2 Torsion strength . 16
4.3 Characteristic life T . 17
c
4.4 Life B . 17
4.5 Luminous flux maintenance . 17
4.6 Resistance to vibration and shock . 17
4.7 Glass-bulb strength . 18
5 Filament lamp data . 18
6 Requirements and test conditions for discharge lamps . 23
6.1 Basic function and interchangeability . 23
6.2 Mechanical strength . 23
6.2.1 Bulb-to-cap connection . 23
6.2.2 Cable-to-cap connection (if any) . 23
6.3 Characteristic life T . 23
c
6.4 Life B . 23
6.5 Luminous flux maintenance . 23
6.6 Resistance to vibration and shock . 23
6.7 Discharge lamps with integrated starting device . 23
6.8 Discharge lamps with integrated starting device and integrated ballast . 24
7 Requirements and test conditions for LED light sources . 24
7.1 Basic function and interchangeability . 24
7.2 UV radiation . 25
7.3 Luminous flux and colour maintenance . 25
7.4 Resistance to vibration and shock . 27
7.5 Electromagnetic compatibility . 28
7.6 Powered thermal cycling test . 28
7.7 Mass . 29
7.8 Typical circuits for LED light sources . 29
7.8.1 General . 29
7.8.2 Typical circuits for LR3, LR5, LY3, LY5, LW3 and LW5 LED light
sources. 29
7.8.3 Typical circuits for LR4 LED light sources . 30
7.9 Maximum power consumption . 31
7.10 Overvoltage test. 31
7.11 Reverse voltage test . 31
7.12 Transient voltage test (field decay) . 32
7.13 Transient voltage test (load dump) . 33
7.14 Electrostatic discharge test (ESD) . 34
7.15 Pulsed operating life (PLT) test . 34
8 Requirements and test conditions for LED packages . 34
8.1 LED package stress test qualification . 34
8.2 Test samples . 35
8.2.1 Lot requirements. 35
8.2.2 Production requirements . 35
8.2.3 Pre- and post-stress test requirements . 36
8.2.4 Assembly of LED packages on test boards . 36
8.2.5 Moisture pre-conditioning (MP) . 36
8.2.6 Thermal resistance (TR) test . 36
8.3 Definition of failure criteria . 36
8.4 Choice between test conditions . 37
8.5 Criteria for passing qualification/requalification . 37
8.6 Qualification test definition . 37
8.6.1 Pre- and post- electrical and photometric test . 37
8.6.2 Pre- and post- external visual (EV) test . 37
8.6.3 High temperature operating life (HTOL) test . 38
8.6.4 Temperature cycling (TMCL) test . 38
8.6.5 Wet high temperature operating life (WHTOL) test . 38
8.6.6 Power temperature cycling (PTMCL) test . 39
8.6.7 Electrostatic discharge, human body model (ESD-HBM) test . 39
8.6.8 Electrostatic discharge, machine model (ESD-MM) test . 39
8.6.9 Destructive physical analysis (DPA) test . 39
8.6.10 Physical dimensions (PD) test . 39
8.6.11 Vibrations variable frequency (VVF) test . 39
8.6.12 Mechanical shock (MS) test . 40
8.6.13 Resistance to soldering heat (RSH-TTW) test . 40
8.6.14 Resistance to soldering heat (RSH-reflow) test . 40
8.6.15 Solderability (SO) test. 40
8.6.16 Thermal shock (TMSK) test . 40
8.6.17 Hydrogen sulphide (H S) test . 41
8.6.18 Pulsed operating life (PLT) test . 41
8.6.19 Dew (DEW) test . 41
8.6.20 Flowing mixed gas corrosion (FMGC) test . 42
8.6.22 Bond shear test (BS) . 43
8.6.23 Die shear test (DS) . 43
8.6.21 Wire bond pull test (WBP) . 43
Annex A (normative) Life test conditions for filament lamps . 44
A.1 Ageing . 44
A.2 Test voltage . 44
A.3 Operating position and operating conditions . 44
A.4 Switching cycle . 44
A.4.1 Single-filament lamps . 44
A.4.2 Dual-filament lamps for headlamps . 45
A.4.3 Dual-filament lamps for light signalling equipment . 45
A.5 Luminous flux and colour maintenance . 45
Annex B (normative) Vibration tests . 46
B.1 General . 46
B.2 Test conditions . 47
B.2.1 General . 47
B.2.2 Mounting (see IEC 60068-2-47) . 47
B.2.3 Measuring points . 47
– 4 – IEC 60810:2017 RLV © IEC 2017
B.2.4 Control point .
...
IEC 60810 ®
Edition 5.0 2017-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamps, light sources and LED packages for road vehicles –
Performance requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC 65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 60810 ®
Edition 5.0 2017-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamps, light sources and LED packages for road vehicles –
Performance requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-4818-8
– 2 – IEC 60810:2017 © IEC 2017
CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 12
4 Requirements and test conditions for filament lamps . 16
4.1 Basic function and interchangeability . 16
4.2 Torsion strength . 16
4.3 Characteristic life T . 16
c
4.4 Life B . 16
4.5 Luminous flux maintenance . 17
4.6 Resistance to vibration and shock . 17
4.7 Glass-bulb strength . 17
5 Filament lamp data . 17
6 Requirements and test conditions for discharge lamps . 22
6.1 Basic function and interchangeability . 22
6.2 Mechanical strength . 22
6.2.1 Bulb-to-cap connection . 22
6.2.2 Cable-to-cap connection (if any) . 22
6.3 Characteristic life T . 22
c
6.4 Life B . 22
6.5 Luminous flux maintenance . 22
6.6 Resistance to vibration and shock . 22
6.7 Discharge lamps with integrated starting device . 22
6.8 Discharge lamps with integrated starting device and integrated ballast . 23
7 Requirements and test conditions for LED light sources . 23
7.1 Basic function and interchangeability . 23
7.2 UV radiation . 24
7.3 Luminous flux and colour maintenance . 24
7.4 Resistance to vibration and shock . 26
7.5 Electromagnetic compatibility . 27
7.6 Powered thermal cycling test . 27
7.7 Mass . 28
7.8 Typical circuits for LED light sources . 28
7.8.1 General . 28
7.8.2 Typical circuits for LR3, LR5, LY3, LY5, LW3 and LW5 LED light
sources. 28
7.8.3 Typical circuits for LR4 LED light sources . 29
7.9 Maximum power consumption . 30
7.10 Overvoltage test. 30
7.11 Reverse voltage test . 30
7.12 Transient voltage test (field decay) . 31
7.13 Transient voltage test (load dump) . 32
7.14 Electrostatic discharge test (ESD) . 33
7.15 Pulsed operating life (PLT) test . 33
8 Requirements and test conditions for LED packages . 33
8.1 LED package stress test qualification . 33
8.2 Test samples . 34
8.2.1 Lot requirements. 34
8.2.2 Production requirements . 34
8.2.3 Pre- and post-stress test requirements . 34
8.2.4 Assembly of LED packages on test boards . 35
8.2.5 Moisture pre-conditioning (MP) . 35
8.2.6 Thermal resistance (TR) test . 35
8.3 Definition of failure criteria . 35
8.4 Choice between test conditions . 36
8.5 Criteria for passing qualification/requalification . 36
8.6 Qualification test . 36
8.6.1 Pre- and post- electrical and photometric test . 36
8.6.2 Pre- and post- external visual (EV) test . 36
8.6.3 High temperature operating life (HTOL) test . 36
8.6.4 Temperature cycling (TMCL) test . 37
8.6.5 Wet high temperature operating life (WHTOL) test . 37
8.6.6 Power temperature cycling (PTMCL) test . 37
8.6.7 Electrostatic discharge, human body model (ESD-HBM) test . 38
8.6.8 Electrostatic discharge, machine model (ESD-MM) test . 38
8.6.9 Destructive physical analysis (DPA) test . 38
8.6.10 Physical dimensions (PD) test . 38
8.6.11 Vibrations variable frequency (VVF) test . 38
8.6.12 Mechanical shock (MS) test . 38
8.6.13 Resistance to soldering heat (RSH-TTW) test . 38
8.6.14 Resistance to s
...
IEC 60810 ®
Edition 5.2 2022-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamps, light sources and LED packages for road vehicles – Performance
requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 300 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
19 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60810 ®
Edition 5.2 2022-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamps, light sources and LED packages for road vehicles – Performance
requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-4688-7
IEC 60810 ®
Edition 5.2 2022-04
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Lamps, light sources and LED packages for road vehicles – Performance
requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
– 2 – IEC 60810:2017+AMD1:2019
+AMD2:2022 CSV © IEC 2022
CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 12
4 Requirements and test conditions for filament lamps . 16
4.1 Basic function and interchangeability . 16
4.2 Torsion strength . 16
4.3 Characteristic life T . 16
c
4.4 Life B . 16
4.5 Luminous flux maintenance . 17
4.6 Resistance to vibration and shock . 17
4.7 Glass-bulb strength . 17
5 Filament lamp data . 17
6 Requirements and test conditions for discharge lamps . 22
6.1 Basic function and interchangeability . 22
6.2 Mechanical strength . 22
6.2.1 Bulb-to-cap connection . 22
6.2.2 Cable-to-cap connection (if any) . 22
6.3 Characteristic life T . 22
c
6.4 Life B . 22
6.5 Luminous flux maintenance . 22
6.6 Resistance to vibration and shock . 22
6.7 Discharge lamps with integrated starting device . 22
6.8 Discharge lamps with integrated starting device and integrated ballast . 23
6.9 White colour groups . 23
7 Requirements and test conditions for LED light sources . 24
7.1 Basic function and interchangeability . 24
7.2 UV radiation . 25
7.3 Luminous flux and colour maintenance . 25
7.4 Resistance to vibration and shock . 27
7.5 Electromagnetic compatibility . 28
7.6 Powered thermal cycling test . 28
7.7 Mass . 29
7.8 Typical circuits for LED light sources . 29
7.8.1 General . 29
7.8.2 Typical circuits for LR3, LR5, LY3, LY5, LW3, LW5 and L1/6 LED light
sources. 29
7.8.3 Typical circuits for LR4 LED light sources . 30
7.9 Maximum power consumption and minimum current draw . 31
7.10 Overvoltage test. 32
7.11 Reverse voltage test . 32
7.12 Transient voltage test (field decay) . 32
7.13 Transient voltage test (load dump) . 33
7.14 Electrostatic discharge test (ESD) . 34
7.15 Pulsed operating life (PLT) test . 35
7.16 White colour groups . 36
+AMD2:2022 CSV © IEC 2022
8 Requirements and test conditions for LED packages . 37
8.1 LED package stress test qualification . 37
8.2 Test samples . 38
8.2.1 Lot requirements. 38
8.2.2 Production requirements . 38
8.2.3 Pre- and post-stress test requirements . 39
8.2.4 Assembly of LED packages on test boards . 39
8.2.5 Moisture pre-conditioning (MP) . 39
8.2.6 Thermal resistance (TR) test . 39
8.3 Definition of failure criteria . 39
8.4 Choice between test conditions . 40
8.5 Criteria for passing qualification/requalification . 40
8.6 Qualification test . 40
8.6.1 Pre- and post- electrical and photometric test . 40
8.6.2 Pre- and post- external visual (EV) test . 41
8.6.3 High temperature operating life (HTOL) test . 41
8.6.4 Temperature cycling (TMCL) test . 41
8.6.5 Wet high temperature operating life (WHTOL) test . 41
8.6.6 Power temperature cycling (PTMCL) test . 42
8.6.7 Electrostatic discharge, human body model (ESD-HBM) test . 42
8.6.8 Electrostatic discharge, machine model (ESD-MM) test . 42
8.6.9 Destructive physical analysis (DPA) test . 42
8.6.10 Physical dimensions (PD) test . 42
8.6.11 Vibrations variable frequency (VVF) test . 42
8.6.12 Mechanical shock (MS) test . 43
8.6.13 Resistance to soldering heat (RSH-TTW) test . 43
8.6.14 Resistance to soldering heat (RSH-reflow) test .
...
IEC 60810 ®
Edition 5.1 2019-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamps, light sources and LED packages for road vehicles –
Performance requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.
IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60810 ®
Edition 5.1 2019-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamps, light sources and LED packages for road vehicles –
Performance requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-6815-5
IEC 60810 ®
Edition 5.1 2019-04
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Lamps, light sources and LED packages for road vehicles –
Performance requirements
Lampes, sources lumineuses et LED encapsulées pour véhicules routiers –
Exigences de performances
– 2 – IEC 60810:2017+AMD1:2019 CSV
© IEC 2019
CONTENTS
FOREWORD . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 12
4 Requirements and test conditions for filament lamps . 16
4.1 Basic function and interchangeability . 16
4.2 Torsion strength . 16
4.3 Characteristic life T . 16
c
4.4 Life B . 16
4.5 Luminous flux maintenance . 17
4.6 Resistance to vibration and shock . 17
4.7 Glass-bulb strength . 17
5 Filament lamp data . 17
6 Requirements and test conditions for discharge lamps . 22
6.1 Basic function and interchangeability . 22
6.2 Mechanical strength . 22
6.2.1 Bulb-to-cap connection . 22
6.2.2 Cable-to-cap connection (if any) . 22
6.3 Characteristic life T . 22
c
6.4 Life B . 22
6.5 Luminous flux maintenance . 22
6.6 Resistance to vibration and shock . 22
6.7 Discharge lamps with integrated starting device . 22
6.8 Discharge lamps with integrated starting device and integrated ballast . 23
7 Requirements and test conditions for LED light sources . 23
7.1 Basic function and interchangeability . 23
7.2 UV radiation . 24
7.3 Luminous flux and colour maintenance . 24
7.4 Resistance to vibration and shock . 26
7.5 Electromagnetic compatibility . 27
7.6 Powered thermal cycling test . 27
7.7 Mass . 28
7.8 Typical circuits for LED light sources . 28
7.8.1 General . 28
7.8.2 Typical circuits for LR3, LR5, LY3, LY5, LW3, LW5 and L1/6 LED light
sources. 28
7.8.3 Typical circuits for LR4 LED light sources . 29
7.9 Maximum power consumption and minimum current draw . 30
7.10 Overvoltage test. 31
7.11 Reverse voltage test . 31
7.12 Transient voltage test (field decay) . 31
7.13 Transient voltage test (load dump) . 32
7.14 Electrostatic discharge test (ESD) . 33
7.15 Pulsed operating life (PLT) test . 34
7.16 White colour groups . 35
8 Requirements and test conditions for LED packages . 36
© IEC 2019
8.1 LED package stress test qualification . 36
8.2 Test samples . 37
8.2.1 Lot requirements. 37
8.2.2 Production requirements . 37
8.2.3 Pre- and post-stress test requirements . 37
8.2.4 Assembly of LED packages on test boards . 38
8.2.5 Moisture pre-conditioning (MP) . 38
8.2.6 Thermal resistance (TR) test . 38
8.3 Definition of failure criteria . 38
8.4 Choice between test conditions . 39
8.5 Criteria for passing qualification/requalification . 39
8.6 Qualification test . 39
8.6.1 Pre- and post- electrical and photometric test . 39
8.6.2 Pre- and post- external visual (EV) test . 39
8.6.3 High temperature operating life (HTOL) test . 39
8.6.4 Temperature cycling (TMCL) test . 40
8.6.5 Wet high temperature operating life (WHTOL) test . 40
8.6.6 Power temperature cycling (PTMCL) test . 40
8.6.7 Electrostatic discharge, human body model (ESD-HBM) test . 41
8.6.8 Electrostatic discharge, machine model (ESD-MM) test . 41
8.6.9 Destructive physical analysis (DPA) test . 41
8.6.10 Physical dimensions (PD) test . 41
8.6.11 Vibrations variable frequency (VVF) test . 41
8.6.12 Mechanical shock (MS) test . 41
8.6.13 Resistance to soldering heat (RSH-TTW) test .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.