ISO/IEC 30169:2022
(Main)Internet of Things (IoT) - IoT applications for electronic label system (ELS)
Internet of Things (IoT) - IoT applications for electronic label system (ELS)
ISO/IEC 30169:2022 specifies the system framework, IoT application model and overall technical requirements for ELS.
This document applies to the design and development of the IoT applications for ELS.
The IoT applications for ELS specified in this document are mainly applicable to the retail industry, and can also provide reference for the design and development of the IoT applications for ELS in other industries.
General Information
Standards Content (Sample)
ISO/IEC 30169
Edition 1.0 2022-05
INTERNATIONAL
STANDARD
Internet of things (IoT) –
IoT applications for electronic label system (ELS)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about ISO/IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
ISO/IEC 30169
Edition 1.0 2022-05
INTERNATIONAL
STANDARD
Internet of things (IoT) –
IoT applications for electronic label system (ELS)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.020 ISBN 978-2-8322-1700-9
– 2 – ISO/IEC 30169:2022 ISO/IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Abbreviated terms . 7
5 Motivation . 7
5.1 Background. 7
5.2 Purpose and significance . 8
6 System framework and IoT application model . 8
6.1 General . 8
6.2 System framework . 8
6.3 IoT application model . 9
6.3.1 General . 9
6.3.2 User . 9
6.3.3 ELS backend system . 10
6.3.4 Database . 11
6.3.5 IoT gateway . 11
6.3.6 ELs . 12
6.3.7 Perception objects . 12
7 General technical requirements . 12
7.1 General . 12
7.2 Function requirements . 12
7.2.1 ELS backend system . 12
7.2.2 Database . 14
7.2.3 IoT gateway . 14
7.2.4 ELs . 14
7.3 Interface requirements . 15
7.3.1 ELS backend system . 15
7.3.2 Database . 15
7.3.3 IoT gateway . 16
7.3.4 ELs . 16
7.3.5 System scalability . 16
7.4 Performance requirements . 16
7.4.1 ELS backend system . 16
7.4.2 Database . 16
7.4.3 IoT gateway . 17
7.4.4 ELs . 17
Annex A (normative) Reference testing requirements . 19
A.1 General . 19
A.2 Mechanical testing of display devices . 19
A.3 System performance testing . 19
Annex B (informative) Application scenarios, and use cases of ELS. 20
B.1 Application scenarios . 20
B.1.1 Consumer-oriented representation of merchandise information . 20
B.1.2 Staff-oriented representation of merchandise management information . 20
B.1.3 P2P delivery and self pick-up oriented merchandise collection. 21
B.2 Use cases . 21
B.2.1 Grocery store . 21
B.2.2 Cosmetics shop . 21
B.2.3 Fashion shop . 21
B.2.4 Industry factory . 22
Bibliography . 23
Figure 1 – System framework of the IoT applications for ELS . 8
Figure 2 – IoT application model of the IoT applications for ELS . 9
– 4 – ISO/IEC 30169:2022 ISO/IEC 2022
INTERNET OF THINGS (IoT) –
IoT APPLICATIONS FOR ELECTRONIC LABEL SYSTEM (ELS)
FOREWORD
1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental,
in liaison with ISO and IEC, also take part in the work.
2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC and ISO National bodies.
3) IEC and ISO documents have the form of recommendations for international use and are accepted by IEC and
ISO National bodies in that sense. While all reasonable efforts are made to ensure that the technical content of
IEC and ISO documents is accurate, IEC and ISO cannot be held responsible for the way in which they are used
or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC and ISO National bodies undertake to apply IEC and
ISO documents transparently to the maximum extent possible in their national and regional publications. Any
divergence between any IEC and ISO document and the corresponding national or regional publication shall be
clearly indicated in the latter.
5) IEC and ISO do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC and ISO marks of conformity. IEC and ISO are not
responsible for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this document.
7) No liability shall attach to IEC and ISO or their directors, employees, servants or agents including individual
experts and members of its technical committees and IEC and ISO National bodies for any personal injury,
property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including
legal fees) and expenses arising out of the publication, use of, or reliance upon, this ISO/IEC document or any
other IEC and ISO documents.
8) Attention is drawn to the Normative references cited in this document. Use of the referenced publications is
indispensable for the correct application of this document.
9) Attention is drawn to the possibility that some of the elements of this ISO/IEC document may be the subject of
patent rights. IEC and ISO shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 30169 has been prepared by subcommittee 41: Internet of Things and Digital Twin, of
ISO/IEC joint technical committee 1: Information technology. It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
JTC1-SC41/277/FDIS JTC1-SC41/287/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1, available at www.iec.ch/members_experts/refdocs
and www.iso.org/directives.
INTRODUCTION
The development of information technology has brought a lot of changes in daily life, especially
with the invention and emergence of IoT technology. IoT technology makes things connected
with each other, in order to enhance the efficiency, provide effective monitoring and reduce the
cost for all the regular management, maintenance, and other business events for those things.
Because of the information explosion era, there is rapid replacement of information, along with
the rich variety of the information and the extremely short life cycle of the information. It is very
difficult for traditional labels (the paper labels) to adapt to such a quick pace of information
updates. Affected by the IoT technology, traditional labels began the process of becoming
digitalized and interconnected.
However, the process of promotion and distribution of the electronic label system (ELS) is much
faster than the formation of the worldwide marketing regulation system for such a newly
emerging IoT application. To help the marketing maintain t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.