IEC 61937-9:2017

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 9: Non-linear PCM bitstreams according to the MAT format

IEC 61937-9:2017(E) describes the method to convey non-linear PCM bitstreams encoded according to the MAT format.
This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition: addition of new frame rates.

General Information

• Status: Published
• Publication Date: 09-Aug-2017
• ICS: 01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
• ICS: 33.160.30 - Audio systems
• ICS: 35.040 - Information coding
• Technical Committee: TA 20 - Analogue and digital audio
• Current Stage: PPUB - Publication issued
• Start Date: 11-Sep-2017
• Completion Date: 10-Aug-2017

Relations

• Revises: IEC 61937-9:2007 - Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 9: Non-linear PCM bitstreams according to the MAT format
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61937-9 ®
Edition 2.0 2017-08
INTERNATIONAL
STANDARD
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying
IEC 60958 –
Part 9: Non-linear PCM bitstreams according to the MAT format
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: [phone]
3, rue de Varembé Fax: [phone]
CH-1211 Geneva 20 [e-mail]
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [e-mail].
IEC 61937-9 ®
Edition 2.0 2017-08
INTERNATIONAL
STANDARD
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying

IEC 60958 –
Part 9: Non-linear PCM bitstreams according to the MAT format

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.160.30; 35.040 ISBN 978-2-8322-4702-0

– 2 – IEC 61937-9:2017 © IEC 2017
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.4 Abbreviated terms . 6
4 Mapping of the audio bitstream on to IEC 61937-1 . 6
4.1 General . 6
4.2 MAT burst-info . 6
5 Format of MAT data-bursts . 6
5.1 General . 6
5.2 Pause data-burst . 7
5.3 Audio data-bursts . 7
5.3.1 The MAT data . 7
5.3.2 Latency of the MAT decoder . 10
Bibliography . 11

Figure 1 – MAT data-burst . 7
Figure 2 – Latency of MAT decoding . 10

Table 1 – Shorthand notation for fractional frame rates . 6
Table 2 – Fields of burst-info . 6
Table 3 – Repetition period of the pause data-bursts . 7
Table 4 – Data-type-dependent information for MAT . 7
Table 5 – Sampling frequency of MAT-encoded audio and IEC 60958 frame rate . 8
Table 6 – MAT audio frame rate and corresponding data-burst repetition period for
video-frame-aligned MAT bitstreams . 8
Table 7 – MAT data-burst sequence and repetition period variance to ensure MAT
audio frame alignment at 59,94 and 119,88 fps . 8
Table 8 – MAT data-burst: meaning of Pc bits 8 to 11 when bit 12 of Pc = 1 . 9
Table 9 – Maximum burst-length values per MAT data-burst repetition period . 9

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL AUDIO –
INTERFACE FOR NON-LINEAR PCM ENCODED AUDIO
BITSTREAMS APPLYING IEC 60958 –

Part 9: Non-linear PCM bitstreams according to the MAT format

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61937-9 has been prepared by technical area 4: Digital system
interfaces and protocols, of IEC technical committee 100: Audio, video and multimedia
systems and equipment.
This second edition cancels and replaces the first edition published in 2007. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) addition of new frame rates.

– 4 – IEC 61937-9:2017 © IEC 2017
The text of this International Standard is based on the following documents:
CDV Report on voting
100/2721/CDV 100/2933/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 61973 series, published under the general title Digital audio –
Interface for non-linear PCM encoded audio bitstreams applying IEC 60958, can be found on
the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

DIGITAL AUDIO –
INTERFACE FOR NON-LINEAR PCM ENCODED AUDIO
BITSTREAMS APPLYING IEC 60958 –

Part 9: Non-linear PCM bitstreams according to the MAT format

1 Scope
This part of IEC 61937 describes the method to convey non-linear PCM bitstreams encoded
according to the MAT format.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60958 (all parts), Digital audio interface
IEC 61937-1:2007, Digital audio interface for non-linear PCM encoded audio bit streams
applying IEC 60958 – Part 1: General
IEC 61937-1:2007/AMD1:2011, Digital audio interface for non-linear PCM encoded audio bit
streams applying IEC 60958 – Part 1: General
IEC 61937-2, Digital audio interface for non-linear PCM encoded audio bit streams applying
IEC 60958 – Part 2: Burst-info
3 Terms, definitions and abbreviated terms
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
audio frame rate
number of MAT audio frames per second
3.2
fractional frame rates
fractional audio frame rates supported by MAT
Note 1 to entry: These frame rates are written in shorthand notation, as specified in Table 1.

– 6 – IEC 61937-9:2017 © IEC 2017
Table 1 – Shorthand notation for
fractional frame rates
Fractional MAT audio frame rate Shorthand version
(fps)
1 000 47,952
48 × �
1 001
1 000 59,94
60 × �
1 001
1 000 119,88
120 × �
1 001
3.3
latency
delay time of an external audio decoder to decode a MAT data-burst, defined as the sum of
two values: the receiving delay time and the decoding delay time
3.4 Abbreviated terms
MAT Metadata-enhanced Audio Transmission
fps frames per second
4 Mapping of the audio bitstream on to IEC 61937-1
4.1 General
The coding of the bitstream and data-burst is in accordance with IEC 61937-1,
IEC 61937-1:2007/AMD1:2011 and IEC 61937-2, including field names such as "Pc", "Pa" and
"R".
4.2 MAT burst-info
The 16-bit burst-info contains information about the data that will be found in the data-burst
(see Table 2).
Table 2 – Fields of burst-info
Repetition period of
Bits of Data-type Data-type Reference
C
...