iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60598-1:2020/ISH1:2023

(Main)

Interpretation Sheet 1 - Luminaires - Part 1: General requirements and tests

Interpretation Sheet 1 - Luminaires - Part 1: General requirements and tests

Feuille d'interprétation 1 - Luminaires - Partie 1: Exigences générales et essais

General Information

Status
Published
Publication Date
30-Aug-2023
ICS
29.140.40 - Luminaires
Technical Committee
SC 34D - Luminaires
Current Stage
PPUB - Publication issued
Start Date
22-Sep-2023
Completion Date
31-Aug-2023
Ref Project

Relations

Revised
IEC 60598-1:2020 - Luminaires - Part 1: General requirements and tests
Effective Date
05-Sep-2023

Buy Standard

IEC 60598-1:2020/ISH1:2023 - Interpretation Sheet 1 - Luminaires - Part 1: General requirements and tests Released:8/31/2023IEC 60598-1:2020/ISH1:2023 - Interpretation Sheet 1 - Luminaires - Part 1: General requirements and tests Released:8/31/2023
PreviousNext
Standard
IEC 60598-1:2020/ISH1:2023 - Interpretation Sheet 1 - Luminaires - Part 1: General requirements and tests Released:8/31/2023
English and French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

IEC 60598-1:2020/ISH1:2023 – 1 –
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

IEC 60598-1
Edition 9.0  2020-08


LUMINAIRES –

Part 1: General requirements and tests


INTERPRETATION SHEET 1



This interpretation sheet has been prepared by subcommittee 34D: Luminaires, of IEC
technical committee 34: Lighting.
The text of this interpretation sheet is based on the following documents:
DISH Report on voting
34D/1697/DISH 34D/1702/RVDISH

Full information on the voting for the approval of this interpretation sheet can be found in the
report on voting indicated in the above table.

___________

Subclause 3.2.27
Annex R – Schedule of amended clauses and subclauses containing more
serious/critical requirements which call for products to be retested
The requirements of Subclause 3.2.27, and consequently the relevant requirements related to
Subclause 3.2.27 in Annex R, are to be considered applicable only to luminaires with built-in
or independent settable or programmable LED controlgear or incorporating a constant lighting
output function. The requirements are not applicable to luminaires with built-in or independent
controlgear having only a fixed output.

ICS 29.140.40
IEC 60598-1:2020-08/ISH1:2023-08(en-fr)

---------------------- Page: 1 ----------------------
– 2 – IEC 60598-1:2020/ISH1:2023
© IEC 2023
COMMISSION ÉLECTROT
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 62722-2-1:2023(Main)
Luminaire performance - Part 2-1: Particular requirements - LED luminaires

IEC 62722-2-1:2023 specifies the performance requirements for LED luminaires, together with the test methods and conditions. It applies to LED luminaires for general lighting purposes. Semi-luminaires are not covered under the scope of this document. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:  
alignment with IEC 62717:2014, IEC 62717:2014/AMD1:2015 and IEC 62717:2014/AMD2:2019;
clarification of temperature requirements for the maintenance test, in 10.2 and Annex A;
introduction of a new Annex C on methods for calculation and measurements of parameters for extension of electric and photometric data.

  • Standard
    57 pages
    English and French language
    sale 15% off
IEC
IEC 60598-2-18:2022(Main)
Luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications

IEC 60598-2-18:2022 specifies requirements for fixed luminaires intended for use in water, or in contact with water, in, for example, the basins of swimming pools, fountains, paddling pools, and garden pools, and for use with electric light sources.
This third edition cancels and replaces the second edition published in 1993 and Amendment 1:2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:  
references to Part 1 have been updated;
some subclauses have been renumbered;
the standard has been redrafted such that it is applicable to both filament lamps and LED light sources;
marking requirements have been updated and 18.5.3 of the previoius edition has been deleted;
18.10.3 of the previous edition has been deleted, as it is no longer relevant, following the update of requirements for cross-sectional areas of external and internal cables in Section 5 of Part 1;
18.10.4 and 18.10.5 of the previous edition renumbered as 18.11.4 and 18.11.5 in this edition have been adapted to allow the use of an alternative waterproof multi-core cable that conforms to the waterproof test of Annex D and Annex E of EN 50525‑2‑21:2011 or to an equivalent regional standard;
in 18.11 (18.10 in the previous edition), the cross-sectional area of wiring has been aligned with Part 1;
in 18.11 (18.10 in the previous edition), the types of cables have been updated with alternative regional cables.

  • Standard
    24 pages
    English and French language
    sale 15% off
IEC
IEC 60598-2-11:2013/AMD1:2022(Amendment)
Amendment 1 - Luminaires - Part 2-11: Particular requirements - Aquarium luminaires
  • Standard
    9 pages
    English and French language
    sale 15% off
IEC
IEC 62722-1:2022(Main)
Luminaire performance - Part 1: General requirements

IEC 62722-1:2022 is available as IEC 62722-1:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62722-1:2022 covers specific performance and environmental requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. Unless otherwise detailed, performance data covered under the scope of this document are for the luminaires in a condition representative of new manufacture, with any specified initial aging procedures completed. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- The reference to and use of the measurement methods for non-active power consumption in accordance with IEC 63103 have been added.
- The pictograms of Annex C have been updated to represent modern light sources.

  • Standard
    38 pages
    English and French language
    sale 15% off
IEC
IEC 60598-2-20:2022(Main)
Luminaires - Part 2-20: Particular requirements - Lighting chains

IEC 60598-2-20:2022 is available as IEC 60598-2-20:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60598-2-20:2022 specifies requirements for lighting chains fitted with series, parallel or a combination of series/parallel connected light sources for use either indoors or outdoors on supply voltages not exceeding 250 V. This fifth edition cancels and replaces the fourth edition published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- specific provisions for temporarily installed protected lighting (TPL) chains have been added;
- new terms and definitions have been added.

  • Standard
    46 pages
    English and French language
    sale 15% off
IEC
IEC 60598-2-22:2021(Main)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

IEC 60598-2-22:2021 is available as IEC 60598-2-22:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60598-2-22:2021 specifies requirements for emergency luminaires for use with electrical lamps on emergency power supplies not exceeding 1 000 V. This fifth edition cancels and replaces the fourth edition published in 2014 and Amendment 1:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- update of requirements for rest mode and inhibiting mode;
- clarification of high temperature operation tests;
- introduction of new requirements for lithium batteries;
- introduction of new requirements for electric double layer capacitors (EDLCs);
- clarification of resistance to heat, fire and tracking;
- clarification of test facilities for self-contained luminaires;
- clarification of the test method for contrast measurements of exit signs.

  • Standard
    78 pages
    English and French language
    sale 15% off
IEC
IEC 60598-1:2020(Main)
Luminaires - Part 1: General requirements and tests

IEC 60598-1:2020 is available as IEC 60598-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60598-1:2020 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this document cover: classification, marking, mechanical construction, electrical construction and photobiological safety. This ninth edition cancels and replaces the eighth edition published in 2014 and Amendment 1:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Revision of Clause 4.30, Fixing cover live parts of non-user replaceable light source;
- Subclause 4.24.2, Blue Light Hazard: removal of Risk Group 0;
- Subclause 5.2.16: additional requirements for AC mains appliance inlets related to IEC 61984;
- Addition of Subclause 3.3.25, UV protection of cable;
- Addition of Clause 4.34, Inclusion of EMF safety requirements (IEC 62493);
- Revision of the requirements for functional earth and protective earth;
- Addition of Clause 4.35, Protection against fast rotating parts;
- Revision of Clause 3.2, Rated voltage marking;
- Revision of Subclause 5.2.10, Cord anchorage;
- Revision of Annex G for touch current and protective conductor current test set-up;
- Addition of requirements for constant light output function and programmable current output;
- Revision of Subclause 8.2.3 c), touch voltage limits for interrupted DC voltage;
- Introduction of PELV;
- Introduction of Ethernet power supply connection for luminaires (PoE);
- Section 9, Introduction of IPX9;
- Addition of Subclause 3.3.26 for wall mounted luminaires;
- Revision of Annex D introducing alternative thermal tests for luminaires with ta marking higher than 25°C;
- Revision of Table 10.3 and Subclause 3.3.19 for protective conductor current limits;
- Track-mounted luminaires: cross reference to Annex A of IEC 60570:2003/AMD2:2019;
- Revision of Subclause 10.2.2, alternative DC electric strength test;
- Revision of Annex D for recessed luminaires;
- Subclause 4.12.5: revision of Table 4.2 for torque test on metal glands;
- Revision of use of bridging capacitors in luminaires;
- Revision of electrical connection to class III plugs.
The contents of the Interpretation sheet 1 (2023-08) have been included in this copy.

  • Standard
    229 pages
    English language
    sale 15% off
  • Standard
    472 pages
    English and French language
    sale 15% off
IEC
IEC 60598-2-23:2020(Main)
Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources

IEC 60598-2-23:2020 specifies requirements for extra-low-voltage lighting systems for ELV light sources, intended for ordinary interior use on supply voltages not exceeding 1 000 V. The luminaires, being connected in parallel, are supplied via freely suspended continuous supporting conductors or profiles, the current in the ELV part of the system not exceeding 25 A.
This second edition cancels and replaces the first edition published in 1996 and Amendment 1:2000. This edition constitutes a technical revision.
This edition includes the following technical changes with respect to the previous edition (there are no major technical changes, see Annex A):
a) The title has been modified to allow the inclusion of other light sources;
b) The scope has been updated to be aligned with the other parts of the IEC 60598-2 series and to include other light sources;
c) Normative references and the reference to transformer and controlgear standards have been updated;
d) The short circuit test (23.7.6.1 and 23.7.6.2) was removed and reference is now made to the same test in Part 1.

  • Standard
    25 pages
    English and French language
    sale 15% off
IEC
IEC 60598-2-1:2020(Main)
Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires

IEC 60598-2-1:2020 specifies requirements for fixed general purpose luminaires for use with electric light sources on supply voltages not exceeding 1 000 V.
This second edition cancels and replaces the first edition published in 1979 and Amendment 1:1987. This edition constitutes a technical revision.
This edition includes the following technical changes with respect to the previous edition (there are no major technical changes, see Annex A):
a) the scope has been modified to be in line with Part 1 to include all electric light sources,
b) references to Part 1 have been updated.

  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 60570:2003/AMD2:2019(Amendment)
Amendment 2 - Electrical supply track systems for luminaires
  • Standard
    20 pages
    English and French language
    sale 15% off