Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

IEC 61439-5:2010 gives specific requirements for public electricity network distribution assemblies (PENDAs), which are stationary assemblies verified by verification tests, as defined in this standard. These ASSEMBLIES are used for the distribution of electrical energy in three-phase systems (see Figure 101 for a typical distribution network). Open type ASSEMBLIES are not covered by this standard. This first edition of IEC 61439-5 cancels and replaces the second edition of IEC 60439-5 (2006), and constitutes a technical revision. This edition of IEC 61439-5 includes the following significant technical changes with respect to the latest edition of IEC 60439-5:
- alignment on IEC 61439-1 regarding the structure and technical content, as applicable;
- introduction of new verifications, accordingly;
- harmonisation of the requirements of substation cable distribution boards and cable distribution cabinets, thereby eliminating the need to identify and define two catagories of assembly;
- simpler standard as a result of a reduction in the number of assembly types defined and the acronyms used to identify the different assemblies.
This publication is to be read in conjunction with IEC 61439-1:2009.

Ensembles d'appareillage à basse tension - Partie 5: Ensembles pour réseaux de distribution publique

La CEI 61439-5:2010 définit des exigences spécifiques aux ensembles pour réseaux de distribution publique (ERD) qui sont fixes et vérifiés par des essais de vérification comme défini dans la présente norme. Ces ENSEMBLES sont utilisés pour la distribution de l'énergie électrique dans des systèmes triphasés (voir Figure 101 représentant un réseau de distribution classique). Les ENSEMBLES ouverts ne sont pas couverts par la présente norme. Cette première édition de la CEI 61439-5 annule et remplace la seconde édition de la CEI 60439-5 (2006), et constitue une révision technique. La présente édition de la CEI 61439-5 inclut les modifications techniques significatives suivantes par rapport à la dernière édition de la CEI 60439-5:
- alignement sur la CEI 61439-1 en ce qui concerne la structure et le contenu technique, s'il y a lieu;
- introduction de nouvelles vérifications, en conséquence;
- harmonisation des exigences relatives aux tableaux de distribution par câbles pour poste (SCDB) et aux ensembles d'appareillage pour réseaux de distribution (ERD) éliminant ainsi la nécessité d'identifier et de définir deux catégories d'ensembles;
- norme simplifiée en raison de la réduction du nombre de types d'ensembles définis et des acronymes utilisés pour identifier les différents ensembles.
Cette publication doit être lue conjointement avec l'IEC 61439-1:2009.

General Information

Status
Published
Publication Date
28-Nov-2010
Current Stage
DELPUB - Deleted Publication
Completion Date
25-Aug-2014
Ref Project

Relations

Buy Standard

Standard
IEC 61439-5:2010 - Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks Released:11/29/2010
English and French language
53 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61439-5 ®
Edition 1.0 2010-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage switchgear and controlgear assemblies –
Part 5: Assemblies for power distribution in public networks

Ensembles d'appareillage à basse tension –
Partie 5: Ensembles pour réseaux de distribution publique

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
§ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
§ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
§ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
§ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
§ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
§ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
§ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
§ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61439-5 ®
Edition 1.0 2010-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Low-voltage switchgear and controlgear assemblies –
Part 5: Assemblies for power distribution in public networks

Ensembles d'appareillage à basse tension –
Partie 5: Ensembles pour réseaux de distribution publique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
U
CODE PRIX
ICS 29.130.20 ISBN 978-2-88912-266-0
– 2 – 61439-5 Ó IEC:2010
CONTENTS
FOREW ORD . 3
1 Sc o pe . 5
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 Interface characteristics . 7
6 Information . 7
7 Service conditions . 8
8 Constructional requirements . 8
9 Performance requirements. 11
10 Design verification . 11
11 Routine verification . 24
Annex AA (normative) Cross-section of conductors . 25

Figure 101 – Typical distribution network . 5
Figure 102 – Diagram of test to verify resistance to shock load of a PENDA-O. 14
Figure 103 – Diagram of test to verify impact force withstand of a PENDA-O . 15
Figure 104 – Diagram of test to verify the resistance to static load. 16
Figure 105 – Sandbag for test to verify the resistance to shock load . 17
Figure 106 – Diagram of test to verify resistance to torsional stress of a PENDA-O . 18
Figure 107 – Diagram of test to verify the mechanical strength of doors . 21
Figure 108 – Striker element for test of resistance to mechanical shock impacts
induced by sharp-edged objects . 22
Figure 109 – Typical test arrangement for mechanical strength of base . 23

Table 101 – Values of assumed loading . 7
Table 102 – Axial load to be applied to the inserts . 21
Table AA.1 – Minimum and maximum cross-section of copper and aluminium
conductors, suitable for connection (see 8.8). 25
Table AA.2 – Standard cross-sections of round copper conductors and approximate
relationship between mm and AWG/kcmil sizes (see 8.8 of Part 1) . 26

61439-5 Ó IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES –

Part 5: Assemblies for power distribution in public networks

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61439-5 has been prepared by subcommittee 17D: Low-voltage
switchgear and controlgear assemblies, of IEC technical committee 17: Switchgear and
controlgear.
This first edition of IEC 61439-5 cancels and replaces the second edition of IEC 60439-5
(2006), and constitutes a technical revision.
This edition of IEC 61439-5 includes the following significant technical changes with respect
to the latest edition of IEC 60439-5:
– alignment on IEC 61439-1 regarding the structure and technical content, as applicable;
– introduction of new verifications, accordingly;
– harmonisation of the requirements of substation cable distribution boards and cable
distribution cabinets, thereby eliminating the need to identify and define two catagories of
assembly;
– simpler standard as a result of a reduction in the number of assembly types defined and
the acronyms used to identify the different assemblies.

– 4 – 61439-5 Ó IEC:2010
The text of this standard is based on the following documents:
FDIS Report on voting
17D/422/FDIS 17D/430/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard is to be read in conjunction with IEC 61439-1. The provisions of the general
rules dealt with in IEC 61439-1 (hereinafter referred to as Part 1) are only applicable to this
standard insofar as they are specifically cited. When this standard states “addition”,
“modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly.
Subclauses that are numbered with a 101 (102, 103 etc.) suffix are additional to the same
subclause in Part 1.
Tables and figures in this Part 5 that are new are numbered starting with 101.
New annexes in this Part 5 are lettered AA, BB, etc.
In this standard, terms written in small capitals are defined in Clause 3.
A list of all parts of the IEC 61439 series, under the general title Low-voltage switchgear and
controlgear assemblies can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61439-5 Ó IEC:2010 – 5 –
LOW-VOLTAGE SWIT
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.