Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking

IEC PAS 61076-2-114:2016(E) describes circular connectors with M8 screw-locking typically used for data transmissions in industrial applications. These connectors consist of fixed and free connectors either rewireable or non-rewireable, with M8 screw-locking. Male connectors have round contacts with a diameter of 0,8 mm. The coding provided by this PAS prevents the mating of accordingly coded male or female connectors to any other similarly sized interfaces covered by other standards. Keywords: Circular connector, Screw-locking, M8

General Information

Status
Replaced
Publication Date
11-May-2016
Technical Committee
Current Stage
DELPUB - Deleted Publication
Completion Date
24-Sep-2020
Ref Project

Relations

Buy Standard

Technical specification
IEC PAS 61076-2-114:2016 - Connectors for electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for data and power connectors with M8 screw-locking
English language
43 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC PAS 61076-2-114 ®
Edition 1.0 2016-05
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD
Connectors for electronic equipment – Product requirements –
Part 2-114: Circular connectors – Detail specification for data and power
connectors with M8 screw-locking

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 15 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC PAS 61076-2-114 ®
Edition 1.0 2016-05
PUBLICLY AVAILABLE
SPECIFICATION
PRE-STANDARD
Connectors for electronic equipment – Product requirements –

Part 2-114: Circular connectors – Detail specification for data and power

connectors with M8 screw-locking

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.220.10 ISBN 978-2-8322-3365-8

– 2 – IEC PAS 61076-2-114:2016  IEC 2016
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references. 8
3 Terms and definitions . 9
4 Technical information . 9
4.1 Systems of levels . 9
4.1.1 Performance levels . 9
4.1.2 Compatibility levels, according to IEC 61076-1:2006 . 9
4.2 Classification into climatic categories (Table 1) . 10
4.3 Creepage and clearance distances . 10
4.4 Current-carrying capacity . 10
4.5 Marking . 10
5 Dimensional information . 10
5.1 General . 10
5.2 Isometric view and common features . 10
5.2.1 General . 10
5.2.2 Common features . 10
5.2.3 Reference system . 10
5.3 Engagement (mating) information . 10
5.3.1 Engaging (mating) direction . 10
5.3.2 Contact levels and sequencing . 11
5.3.3 Perpendicular to the engaging (mating) direction . 11
5.3.4 Inclination . 11
5.4 Fixed connectors . 11
5.4.1 Dimensions . 11
5.4.2 Terminations . 14
5.5 Free connectors . 14
5.5.1 Dimensions . 14
5.6 Accessories . 20
5.7 Mounting information for connectors . 21
5.7.1 Mounting on panels . 21
5.8 Gauges . 21
5.8.1 Sizing gauges and retention force gauges . 21
5.8.2 Mechanical function, engaging/separating/insertion/withdrawal force
gauges . 21
5.8.3 Probes . 21
5.8.4 Contact resistance gauge . 21
5.8.5 Test panel (for voltage proof test) . 21
5.8.6 Test panel (for EMC/ crosstalk, etc.) . 22
6 Characteristics . 22
6.1 General . 22
6.2 Pin assignment and other definitions . 22
6.3 Classification into climatic categories . 22
6.4 Electrical characteristics . 22
6.4.1 Creepage and clearance distances . 22

6.4.2 Voltage proof . 22
6.4.3 Current-carrying capacity . 23
6.4.4 Contact and shield resistance . 23
6.4.5 Insulation resistance . 23
6.4.6 Impedance . 23
6.5 Mechanical characteristics . 23
6.5.1 Mechanical operation . 23
6.5.2 Effectiveness of connector coupling device . 23
6.5.3 Engaging and separating forces (or insertion and withdrawal forces) . 24
6.5.4 Contact retention in insert . 24
6.5.5 Polarization and coding method . 24
6.6 Other characteristics . 24
6.6.1 Shock and vibration (method either random or sine) . 24
6.6.2 Degree of protection provided by enclosures (IP code) . 26
6.6.3 Screen and shielding properties . 26
6.7 Environmental aspects . 26
6.7.1 Marking of insulation material (plastics) . 26
6.7.2 Design/ use of material . 26
7 Test schedule . 26
7.1 General . 26
7.2 Climatic category . 27
7.3 Creepage and clearance distances . 27
7.4 Arrangement for contact resistance measurement . 28
7.5 Arrangement for dynamic stress tests . 28
7.6 Arrangement for testing static load, axial . 29
7.7 Wiring of specimens . 30
7.8 Test schedules . 30
7.8.1 Basic (minimum) test schedule . 30
7.8.2 Full test schedule . 30
7.9 Test procedures and measuring methods . 41
7.10 Pre-conditioning . 41
7.11 Wiring and mounting of specimens . 42
7.11.1 Wiring . 42
7.11.2 Mounting . 42
Annex A (informative) Contact and pair designation for balanced cabling . 43
A.1 Recommendation for cable connection . 43

Figure 1 – Engagement (mating) information . 11
Figure 2 – Tube insert, male contacts dip solder mounting, long version . 12
Figure 3 – Tube insert, male contacts dip solder mounting, short version . 13
Figure 4 – Fixed connector with wire ends, style EM . 13
Figure 5 – Fixed connector with wire ends, style EF. 14
Figure 6 – Rewireable connector, male contacts, straight version, with locking nut . 15
Figure 7 – Rewireable connector, male contacts, right angled version, with locking nut . 15
Figure 8 – Non-rewireable connector, male contacts, straight version, with locking nut . 16
Figure 9 – Non-rewireable connector, male contacts, right angled version, with locking nut . 16
Figure 10 – Rewireable connector, female contacts, straight version, with locking nut . 17

– 4 – IEC PAS 61076-2-114:2016  IEC 2016
Figure 11 – Rewireable connector, female contacts, right angled version, with locking nut . 17
Figure 12 – Non-rewireable connector, female contacts, straight version, with locking nut . 18
Figure 13 – Non-rewireable connector, female contacts, right angled v
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.