IEC 61097-12:1996/AMD2:2023

Amendment 2 - Global maritime distress and safety system (GMDSS) - Part 12: Survival craft portable two-way VHF radiotelephone apparatus - Operational and performance requirements, methods of testing and required test results

Amendement 2 - Système mondial de détresse et de sécurité en mer (SMDSM) - Part 12: Radiotéléphone émetteur-récepteur portable VHF pour embarcation de sauvetage - Exigences d'exploitation et de fonctionnement, méthodes d'essai et résultats d'essai exigés

General Information

• Status: Published
• Publication Date: 19-Nov-2023
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: TC 80 - Maritime navigation and radiocommunication equipment and systems
• Drafting Committee: MT 19 - TC 80/MT 19
• Current Stage: PPUB - Publication issued
• Start Date: 14-Dec-2023
• Completion Date: 20-Nov-2023

Relations

• Amends: IEC 61097-12:1996 - Global maritime distress and safety system (GMDSS) - Part 12: Survival craft portable two-way VHF radiotelephone apparatus - Operational and performance requirements, methods of testing and required test results
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 61097-12 ®
Edition 1.0 2023-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 2
AMENDEMENT 2
Global maritime distress and safety system (GMDSS) –
Part 12: Survival craft portable two-way VHF radiotelephone apparatus –
Operational and performance requirements, methods of testing and required test
results
Système mondial de détresse et de sécurité en mer (SMDSM) –
Partie 12: Radiotéléphone émetteur-récepteur portable VHF pour embarcation de
sauvetage – Exigences d'exploitation et de fonctionnement, méthodes d'essai et
résultats d'essai exigés
IEC 61097-12:1996-12/AMD2:2023-11(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 300 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 19 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC 61097-12 ®
Edition 1.0 2023-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 2
AMENDEMENT 2
Global maritime distress and safety system (GMDSS) –

Part 12: Survival craft portable two-way VHF radiotelephone apparatus –

Operational and performance requirements, methods of testing and required

test results
Système mondial de détresse et de sécurité en mer (SMDSM) –

Partie 12: Radiotéléphone émetteur-récepteur portable VHF pour embarcation de

sauvetage – Exigences d'exploitation et de fonctionnement, méthodes d'essai et

résultats d'essai exigés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.060.20, 47.020.70 ISBN 978-2-8322-7864-2

– 2 – IEC 61097-12:1996/AMD2:2023
© IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM (GMDSS) –

Part 12: Survival craft portable two-way VHF radiotelephone apparatus –
Operational and performance requirements, methods of
testing and required test results

AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to IEC 61097-12:1996 has been prepared by IEC technical committee 80:
Maritime navigation and radiocommunication equipment and systems.
The text of this Amendment is based on the following documents:
Draft Report on voting
80/1069/CDV 80/1085/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
© IEC 2023
The language used for the development of this Amendment is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
1 Scope
Replace, in the existing first paragraph, the reference "IEC 945" with "IEC 60945" (2
occurrences).
Replace, in the existing second paragraph, modified by IEC 61097-12:1996/AMD1:2017, the
reference "IMO Resolution MSC.149(77)" with "IMO Resolution MSC.515(105)".

Delete, in the existing second paragraph the reference to ITU-R M,542-1.

Replace, in the existing note, modified by IEC 61097-12:1996/AMD1:2017, the reference "IMO
Resolutions MSC.149(77)" with "IMO Resolution MSC.515(105)".
2 Normative references
Replace the existing reference "IEC 529" with the following new reference
IEC 60529:1989, Degrees of protection provided by enclosures (IP Code)

Replace the existing reference "IEC 945" with the following new reference:
IEC 60945:2002, Maritime navigation and radiocommunication equipment and systems –
General requirements – Methods of testing and required test results

– 4 – IEC 61097-12:1996/AMD2:2023
© IEC 2023
Replace the existing reference to "IMO International Convention for the Safety of Life At Sea
(SOLAS): 1974, as amended 1988 (GMDSS) – Chapter III: Life-saving appliances and
arrangements", with the following new reference
IMO International Convention for the Safety of Life At Sea (SOLAS):1974, as amended 1988
(GMDSS) – Chapter IV: Radiocommunication

Replace the reference "IMO Resolution MSC.149(77)", added by IEC 61097-
12:1996/AMD1:2017, with the following new reference:
IMO Resolution MSC.515(105):2022, Performance standards for survival craft portable two-way
VHF radiotelephone apparatus
Replace the existing reference to "ITU Radio Regulations: 1995, Appendix S3: Table of
maximum permitted spurious emissions power levels", with the following new reference
ITU Radio Regulations:2020, Appendix 3: Table of maximum permitted spurious emissions
power levels
Replace the existing reference to "ITU Radio Regulations: 1990, Appendix 18: Table of
transmitting frequencies in the band 156 – 174 MHz for stations in the maritime mobile service",
with the following new reference
ITU Radio Regulations:2020, Appendix 18: Table of transmitting frequencies in the band 156 –
174 MHz for stations in the maritime mobile service

Delete the reference to ITU-R M.542-1:1982
3 Performance requirements
Replace all the existing references "MSC.149(77)", added by IEC 61097-12:1996/AMD1:2017,
with "MSC.515(105)" (29 occurrences).
3.3.6 Marking and identification
Replace the existing text of 3.3.6, modified by IEC 61097-12:1996/AMD1:2017, with the
following new text:
(MSC.515(105)/13.1) In addition to the general requirements specified in resolution A.694(17),
as detailed in IEC 60945, the following shall be clearly indicated on the exterior of the
equipment:
1) brief operating instructions;
2) expiry date for the primary batteries; and
3) original equipment manufacturer.
(MSC.515(105)/13.2) The expiry date of the primary battery shall use the date of manufacture
of the cells within the battery as its starting point and be calculated as follows:

-------
...