Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes

IEC 60286-1:2017 applies to the tape packaging of components with axial leads for use in electronic equipment. In general, the tape is applied to the component leads.
It covers requirements for taping techniques used with equipment for the preforming of leads, automatic handling, insertion and other operations, and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes.
This edition includes the following significant changes with respect to the previous edition:
a) a complete revision of the structure (detailed in Annex A) and reworked layout.

Emballage des composants pour opérations automatisées - Partie 1: Mise en bande des composants à sorties axiales en bandes continues

L'IEC 60286-1:2017 est applicable à la mise en bande des composants à sorties axiales utilisés dans les équipements électroniques. En général, la bande est appliquée aux sorties des composants.
Elle contient des exigences relatives aux techniques de mise en bande applicables pour l'utilisation des équipements de préformage des sorties, de manutention, d'insertion automatique et d'autres opérations. Elle fournit uniquement les dimensions essentielles pour la mise en bande de composants destinés aux opérations mentionnées ci-dessus.
La présente édition inclut les modifications majeures suivantes par rapport à l'édition précédente:
a) révision complète de la structure (détaillée à l' REF _Ref482173886 \r \h \* MERGEFORMAT Annexe A 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000000E0000005F005200650066003400380032003100370033003800380036000000 ) et remaniement de la mise en page.

General Information

Status
Published
Publication Date
25-Jul-2017
Current Stage
PPUB - Publication issued
Start Date
26-Jul-2017
Completion Date
26-Jul-2017
Ref Project

Buy Standard

Standard
IEC 60286-1:2017 - Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
English and French language
24 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

IEC 60286-1
Edition 3.0 2017-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –
Part 1: Tape packaging of components with axial leads on continuous tapes
Emballage des composants pour opérations automatisées –
Partie 1: Mise en bande des composants à sorties axiales en bandes continues
IEC 60286-1:2017-07(en-fr)
---------------------- Page: 1 ----------------------
THIS PUBLICATION IS COPYRIGHT PROTECTED
Copyright © 2017 IEC, Geneva, Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from

either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC

copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or

your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite

ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des

questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez

les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC

The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes

International Standards for all electrical, electronic and related technologies.
About IEC publications

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the

latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org

The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,

variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English

committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.

and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary

details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and

once a month by email. French extracted from the Terms and Definitions clause of

IEC publications issued since 2002. Some entries have been

IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and

If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC

La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des

Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC

Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la

plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org

webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au

La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en

en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans

comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire

projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary

Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais

Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des

Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées

antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
---------------------- Page: 2 ----------------------
IEC 60286-1
Edition 3.0 2017-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of components for automatic handling –
Part 1: Tape packaging of components with axial leads on continuous tapes
Emballage des composants pour opérations automatisées –
Partie 1: Mise en bande des composants à sorties axiales en bandes continues
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.020 31.240 ISBN 978-2-8322-7259-6

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 3 ----------------------
– 2 – IEC 60286-1:2017 © IEC 2017
CONTENTS

CONTENTS ............................................................................................................................ 2

FOREWORD ........................................................................................................................... 3

1 Scope .............................................................................................................................. 5

2 Normative references ...................................................................................................... 5

3 Terms and definitions ...................................................................................................... 5

4 Dimensions...................................................................................................................... 5

4.1 Dimensions common to tapes and taped components with axial leads .................... 5

4.1.1 General ........................................................................................................... 5

4.1.2 Body location (permissible lateral deviation) .................................................... 7

4.1.3 Tape spacing ................................................................................................... 7

4.2 Taping .................................................................................................................... 7

4.2.1 General ........................................................................................................... 7

4.2.2 Orientation of polarized components ................................................................ 8

4.2.3 Position, kinks and bends of the leads ............................................................. 8

4.2.4 The ends of the leads ...................................................................................... 8

4.2.5 Holding in the tape .......................................................................................... 8

4.2.6 Requirements of tape material, storage, and handling ..................................... 8

4.2.7 Splices of tape ................................................................................................. 8

4.2.8 Leader tape ..................................................................................................... 8

5 Packing ........................................................................................................................... 8

5.1 General ................................................................................................................... 8

5.2 Dimensions of the reel ............................................................................................ 9

5.3 Distances W and W ............................................................................................. 9

1 2

5.4 Recycling ................................................................................................................ 9

5.5 Protection of components ....................................................................................... 9

5.6 Reel filling ............................................................................................................... 9

5.7 Dimensions of the fan-fold container ..................................................................... 10

5.8 Missing components ............................................................................................. 10

6 Marking ......................................................................................................................... 10

Annex A (informative) Cross-reference for references to the previous edition of this

document ...................................................................................................................... 11

Bibliography .......................................................................................................................... 12

Figure 1 – Dimensions for tape packaging of components with axial leads .............................. 6

Figure 2 – Reel dimensions .................................................................................................... 9

Figure 3 – Outer dimensions of the fan-fold arrangement ...................................................... 10

Table 1 – Tape widths and permissible variation ..................................................................... 6

Table 2 – Component spacing and permissible deviation ........................................................ 7

Table 3 – Tape spacing........................................................................................................... 7

Table A.1 – Cross-reference to clauses ................................................................................ 11

---------------------- Page: 4 ----------------------
IEC 60286-1:2017 © IEC 2017 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –
Part 1: Tape packaging of components
with axial leads on continuous tapes
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60286-1 has been prepared by IEC technical committee 40:

Capacitors and resistors for electronic equipment.

This bilingual version (2019-08) corresponds to the monolingual English version, published in

2017-07.

This third edition cancels and replaces the second edition published in 1997. This edition

constitutes a technical revision.

This edition includes the following significant changes with respect to the previous edition:

a) a complete revision of the structure (detailed in Annex A) and reworked layout.

---------------------- Page: 5 ----------------------
– 4 – IEC 60286-1:2017 © IEC 2017
The text of this International Standard is based on the following documents:
FDIS Report on voting
40/2538/FDIS 40/2552/RVD

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.
The French version of this standard has not been voted upon.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts of the IEC 60286 series, under the general title Packaging of components for

automatic handling, can be found on the IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 6 ----------------------
IEC 60286-1:2017 © IEC 2017 – 5 –
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –
Part 1: Tape packaging of components
with axial leads on continuous tapes
1 Scope

This part of IEC 60286 applies to the tape packaging of components with axial leads for use in

electronic equipment. In general, the tape is applied to the component leads.

It covers requirements for taping techniques used with equipment for the preforming of leads,

automatic handling, insertion and other operations, and includes only those dimensions which

are essential to the taping of components intended for the above-mentioned purposes.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their

content constitutes requirements of this document. For dated references, only the edition

cited applies. For undated references, the latest edition of the referenced document (including

any amendments) applies.

IEC 60294, Measurement of the dimensions of a cylindrical component with axial terminations

ISO 11469, Plastics – Generic identification and marking of plastic products
3 Terms and definitions
No terms and definitions are listed in this document.

ISO and IEC maintain terminological databases for use in standardization at the following

addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Dimensions
4.1 Dimensions common to tapes and taped components with axial leads
4.1.1 General
The general configuration is shown in Figure 1, Table 1 and Table 2.
---------------------- Page: 7 ----------------------
– 6 – IEC 60286-1:2017 © IEC 2017
Key
A is the distance between adjacent components in tape.
B Is the Inner distance between two tapes.
K is the allowed displacement distance of component in tape.
L is lead length between component body and inner side of tape on left side.
L is lead length between component body and inner side of tape on right side.
L is the part of lead protruded outside the tape.
L is the body length of the component.
max
M is the max allowed distance of displacement.
T is the width of the tape.

W is the maximum allowed total distance of the component after protrusion of leads outside of the tape.

Figure 1 – Dimensions for tape packaging of components with axial leads
Table 1 – Tape widths and permissible variation
Nominal widths Permissible
of tape variation in width
mm mm
6 ±1
9 ±1
---------------------- Page: 8 ----------------------
IEC 60286-1:2017 © IEC 2017 – 7 –
Table 2 – Component spacing and permissible deviation
Standard spacing Permissible
between components cumulative deviation
A over ten spacing
mm mm
5 ± 0,5 ±2
10 ± 0,5 ±2
15 ± 0,5 ±2
20 ± 0,5 ±2
4.1.2 Body location (permissible lateral deviation)

Dimension K, being the width of the window in which the component body shall be located,

shall be 1,0 mm (for B = 26 mm) or 1,4 mm (for B > 26 mm) wider than the maximum length

L of the component body. The latter is the body length measured in accordance with

max
IEC 60294.

Unless otherwise specified, the window shall be centrally located between the tapes.

When a gauge measurement to determine dimension K is impractical, it is possible to

measure the distances L and L of the leads. The difference between L and L shall not

1 2 1 2
exceed 1,0 mm (for B = 26 mm) or 1,4 mm (for B > 26 mm).
4.1.3 Tape spacing

The maximum overall width W, including any lead protrusion L , shall not exceed 140 mm. Its

value shall be chosen in relation to the component dimensions.
The tape spacing given in Table 3 is recommended.
Table 3 – Tape spacing
Inside tape spacing
+1,5
0
63 ± 2
73 ± 2
83 ± 2
93 ± 2
Inside tape spacing B above 93 mm to be in 10 mm
increments with a tolerance ±2 mm as long as the
maximum overall width W of 140 mm is not exceeded.
4.2 Taping
4.2.1 General

The following requirements for axial components shall be met as appropriate (see Figure 1).

---------------------- Page: 9 ----------------------
– 8 – IEC 60286-1:2017 © IEC 2017
4.2.2 Orientation of polarized components

All polarized components shall be oriented in one direction; the polarized components shall be

clearly identified by use of different colours or marked tapes, the anode being of a white or

neutral colour.
4.2.3 Position, kinks and bends of the leads
The position, kinks and bends of the leads are as follows.
a) The leads shall be free from kinks and bends.

b) The method used to position the component leads on the tape shall be such that the leads

are not nicked or otherwise damaged.

c) Leads shall not be bent beyond 1,0 mm (for B = 26 mm) or 1,2 mm (for B > 26 mm) from

their nominal position when measured from the leading edge of the component lead at the

inside tape edge and at the lead egress from the component (see dimension M in
Figure 1).
4.2.4 The ends of the leads
The ends of the leads shall not protrude beyond the tapes.
4.2.5 Holding in the tape

The components shall be held sufficiently in the tape(s) so that they cannot come free during

normal handling.
4.2.6 Requirements of tape material, storage, and handling

The tapes shall be suitable to withstand storage of the taped components. The tape material

shall not migrate along the leads or give off vapours that can affect solderability or deteriorate

the component properties or leads by chemical action (e.g. corrosion).

In addition, the tapes shall not become detached, thereby causing the components to lose

their relative position after storage, and the tape shall not age to such an extent that its

strength is reduced, causing it to break either when the components are unreeled manually or

by an assembly machine.

Tapes in adjacent layers shall not stick together in the packing, because of the exposed

adhesive for instance.
4.2.7 Splices of tape

Splices shall be at least as strong as the original tape and shall not be thicker than four times

the thickness of a single layer of the original tape. Splices shall not be misaligned by more

than 0,8 mm. When splicing is applied, component spacing A shall remain within the

tolerances as specified in Table 2.
4.2.8 Leader tape

A twin leader tape, free of components, having a minimum length of 200 mm shall be provided

at the beginning and at the end of the tape.
5 Packing
5.1 General
The tapes of components may either be wound on reels or fan-folded.
---------------------- Page: 10 ----------------------
IEC 60286-1:2017 © IEC 2017 – 9 –
5.2 Dimensions of the reel
The preferred reel dimensions are shown in Figure 2.
Key
1 is the optional shape: circular or square.
2 is the optional shape: circular or polygonal.
A is the reel diameter: maximum 400 mm.
C is the arbor hole diameter: 14 mm to 38 mm.
N is the hub diameter: 34,9 mm to 102 mm.
Figure 2 – Reel dimensions
5.3 Distances W and W
1 2

The distances W and W shall be governed by the overall width of the taped components W

1 2
(see Figure 1) and shall allow proper reeling and unreeling.
5.4 Recycling

Reels as defined in Figure 2 should be made of recyclable material. When such material is

used, the reel shall be permanently marked with the recycling symbol.
ISO 11469 should be used for making the material.
5.5 Protection of components

In order to prevent component damage and lead distortion, protection between layers of

components and over the last layer may be necessary. In this case, protection materials shall

not cause deterioration of the component or of lead solderability.
5.6 Reel filling

The total number of components on the reel shall be such that the components and the final

cover shall not extend beyond the smallest dimension of the flange in the radial direction.

---------------------- Page: 11 ----------------------
– 10 – IEC 60286-1:2017 © IEC 2017
5.7 Dimensions of the fan-fold container
The preferred outer dimensions of a fan-fold arrangement are shown in Figure 3.
Key
X is the width of the fan-folded arrangement: controlled by W.
Y is the length of the fan-folded arrangement: maximum 610 mm.
Z is the height of the fan-folded arrangement: maximum 150 mm.
Figure 3 – Outer dimensions of the fan-fold arrangement
5.8 Missing components

For automatic insertion, it is required that the number of empty places in the tape, per reel or

fan-fold arrangement, shall not exceed 0,1 % or one position, whichever is greater, without

consecutive empty places, unless agreed otherwise between the customer and the
manufacturer.
6 Marking
th th
When required, the tape shall be marked at every 50 or 100 component place.
---------------------- Page: 12 ----------------------
IEC 60286-1:2017 © IEC 2017 – 11 –
Annex A
(informative)
Cross-reference for references to the previous edition
of this document

The revision of this document has resulted in new numbering for some clauses. Table A.1

provides cross-references for the clause numbering of this document compared to its previous

edition.
Table A.1 – Cross-reference to clauses
IEC 60286-1:1997
IEC 60286-1:2017
nd rd
2 edition 3 edition
Notes
Clause Clause
1 General and scope are merged into one
1.1
1.2 2
In accordance with the ISO/IEC Directives – Part 2
— 3
2 4
3 5 In accordance with the change of clause numbers
4 6
---------------------- Page: 13 ----------------------
– 12 – IEC 60286-1:2017 © IEC 2017
Bibliography

IEC 60286-2, Packaging of components for automatic handling − Part 2: Tape packaging of

components with unidirectional leads on continuous tapes

IEC 60286-3, Packaging of components for automatic handling − Part 3: Packaging of surface

mount components on continuous tapes
IEC 60301, Preferred diameters of wire terminations of capacitors and resistors
___________
---------------------- Page: 14 ----------------------
– 14 – IEC 60286-1:2017 © IEC 2017
SOMMAIRE

AVANT-PROPOS .................................................................................................................. 15

1 Domaine d'application ................................................................................................... 17

2 Références normatives .................................................................................................. 17

3 Termes et définitions ..................................................................................................... 17

4 Dimensions.................................................................................................................... 17

4.1 Dimensions communes aux bandes et aux composants à sorties axiales mis

en bande............................................................................................................... 17

4.1.1 Généralités .................................................................................................... 17

4.1.2 Position du corps (écart latéral admissible) .................................................... 19

4.1.3 Distance entre bandes ................................................................................... 19

4.2 Mise en bande ...................................................................................................... 20

4.2.1 Généralités .................................................................................................... 20

4.2.2 Orientation de composants polarisés ............................................................. 20

4.2.3 Position, effet de paille et courbures des sorties ............................................ 20

4.2.4 Extrémités des sorties ................................................................................... 20

4.2.5 Maintien dans la bande .................................................................................. 20

4.2.6 Exigences sur les matériaux, le stockage et la manipulation des bandes ....... 20

4.2.7 Epissures de bandes ..................................................................................... 20

4.2.8 Amorce de bande .......................................................................................... 20

5 Mise en bande ............................................................................................................... 21

5.1 Généralités ........................................................................................................... 21

5.2 Dimensions de la bobine ....................................................................................... 21

5.3 Distances W et W .............................................................................................. 21

1 2

5.4 Recyclage ............................................................................................................. 21

5.5 Protection des composants ................................................................................... 22

5.6 Remplissage de bobine ......................................................................................... 22

5.7 Dimensions de la boîte pour conditionnement en accordéon ................................. 22

5.8 Composants manquants ........................................................................................ 22

6 Marquage ...................................................................................................................... 22

Annexe A (informative) Correspondances des références par rapport à l'édition

précédente du présent document ................................................................................... 23

Bibliographie ...................................................................................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.