IEC 60488-1:2004

Higher performance protocol for the standard digital interface for programmable instrumentation - Part 1: General

applies to interface systems used to interconnect both programmable and nonprogrammable electronic measuring apparatus with other apparatus and accessories necessary to assemble instrumentation systems. It applies to the interface of instrumentation systems, or portions of them,The basic functional specifications of this standard may be used in digital interface applications that require longer distances, more devices, increased noise immunity, or combinations of these.It bears double logo IEC/IEEE

General Information

• Status: Published
• Publication Date: 14-Jul-2004
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: SC 65C - Industrial networks
• Current Stage: WPUB - Publication withdrawn
• Start Date: 31-Oct-2024
• Completion Date: 31-Oct-2024

Standards Content (Sample)

INTERNATIONAL IEC
STANDARD 60488-1
First edition
2004-07
™
IEEE 488.1
Higher performance protocol for the standard
digital interface for programmable
instrumentation –
Part 1:
General
Reference number
IEC 60488-1(E):2004
IEEE Std. 488.1(E):2003
Publication numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1.
Consolidated editions
The IEC is now publishing consolidated versions of its publications. For example,
edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the
base publication incorporating amendment 1 and the base publication incorporating
amendments 1 and 2.
Further information on IEC publications
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology. Information relating to
this publication, including its validity, is available in the IEC Catalogue of
publications (see below) in addition to new editions, amendments and corrigenda.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is also available from the following:
• IEC Web Site (www.iec.ch)
• Catalogue of IEC publications
) enables you to
The on-line catalogue on the IEC web site (www.iec.ch/searchpub
search by a variety of criteria including text searches, technical committees
and date of publication. On-line information is also available on recently issued
publications, withdrawn and replaced publications, as well as corrigenda.
• IEC Just Published
This summary of recently issued publications (www.iec.ch/online_news/ justpub)
is also available by email. Please contact the Customer Service Centre (see
below) for further information.
• Customer Service Centre
If you have any questions regarding this publication or need further assistance,
please contact the Customer Service Centre:

Email: [e-mail]
Tel: [phone]
Fax: [phone]
INTERNATIONAL IEC
STANDARD 60488-1
First edition
2004-07
™
IEEE 488.1
Higher performance protocol for the standard
digital interface for programmable
instrumentation –
Part 1:
General
Copyright © IEEE 2004 ⎯ All rights reserved
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by the Institute of Electrical and Electronics Engineers, Inc.
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
The Institute of Electrical and Electronics Engineers, Inc, 3 Park Avenue, New York, NY 10016-5997, USA
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.standards.ieee.org
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия

– 2 –
IEEE 488.1-2003(E)
CONTENTS
Foreword. 4
IEEE Introduction. 8
1. Overview. 10
1.1 Scope. 10.
1.2 Object. 11
1.3 Interface system overview . 11
2. References. 15
3. Definitions . 15
3.1 General system terms . 15
3.2 Units connected via the interface system . 16
3.3 Signals and paths . 16
4. Functional specifications. 17
4.1 Functional partition. 17
4.2 Notation used to specify interface functions. 21
4.3 Source handshake (SH) interface function . 24
4.4 Acceptor handshake (AH) and extended acceptor handshake (AHE) interface functions . 32
4.5 Talker (T) interface function (Includes serial poll capabilities) . 41
4.6 Listener (L) interface function. 49
4.7 Service request (SR) interface function . 55
4.8 Remote local (RL) interface function . 57
4.9 Parallel poll (PP) interface function. 60
4.10 Device clear (DC) interface function. 64
4.11 Device trigger (DT) interface function .    66
4.12 Controller (C) interface function . 68
4.13 Remote message coding and transfer. 80
4.14 Configuration (CF) interface function. 86
5. Electrical specifications.91
5.1 Application. 91
5.2 Logical and electrical state relationships . 91
5.3 Driver requirements . 91
5.4 Receiver requirements. 92
5.5 Composite device load requirements . 92
5.6 Ground requirements. 94
5.7 Cable characteristics. 95
5.8 State transition timing values . 95
6. Mechanical specifications. 98
6.1 Application. 98
6.2 Connector type. 98
6.3 Connector contact assignments. 99
6.4 Device connector mounting .100
6.5 Cable assembly .101
Published by IEC under licence from IEEE. © 2003 IEEE. All rights reserved.

– 3 –
IEEE 488.1-2003(E)
7. System applications and guidelines for the designer . 103
7.1 System compatibility. 103
7.2 Data rate consideration. 103
7.3 Device capabilities . 104
7.4 AND and OR logic operations . 104
7.5 Address assignment. 104
7.6 Typical combinations of interface functions.107
7.7 Unimplemented interface message handling .109
8. System requirements and guidelines for the user . 110
8.1 System compatibility . 110
8.2 System installation requirements . 110
8.3 Address assignment . 111
8.4 Cabling restrictions. 112
8.5 Operational sequence guidelines . 112
Annex A (informative) Typical instrument system . 116
Annex B (informative) Handshake process timing sequence. 118
Annex C (informative) Interface function-allowable subsets. 124
Annex D (informative) Interface message reference list. 134
Annex E (informative) Multiline interface messages: ISO code representation. 138
Annex F (informative) Logic circuit implementation. 139
Annex G (informative) Parallel polling sequence . 141
Annex H (informative) Description of interface parameters on data sheets. 142
Annex I (informative) Holdoff considerations for noninterlocked transfers . 146
Annex J (informative) Address switch labeling and interface status indicators . 147
Annex K (informative) Recommended methods for reducing the effects of radiated and conducted
interference for devices specified in this standard. 150
Annex L (informative) List of Participants . 153
Published by IEC under licence from IEEE. © 2003 IEEE. All rights reserved.

– 4 –
IEEE 488.1-2003(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HIGHER PERFORMANCE PROTOCOLE FOR THE STANDARD DIGITAL
INTERFACE FOR PROGRAMMABLE INSTRUMENTATION –
Part 1: General
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to
promote international co-operation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, IEC publishes International Standards,
Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter
referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National
Committee interested in the subject dealt with may participate in this preparatory work. International,
governmental and non-governmental organizations liaising with the IEC also participate in this preparation.
IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has
representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent
...