Conduit systems for cable management - Part 1: General requirements

This part of IEC 61386 specifies requirements and tests for conduit systems, including conduits and conduit fittings, for the protection and management of insulated conductors and/or cables in electrical installations or in communication systems up to 1 000 V a.c. and/or 1 500 V d.c. This second edition cancels and replaces the first edition published in 1996, and its Amendment 1 (2000), and it constitutes a technical revision. The changes to the first edition are as follows:
- change to the length of the test specimen between fittings for the tensile test,
- editorial and normative reference updates.

Systèmes de conduits pour la gestion du câblage - Partie 1: Exigences générales

La présente partie de la CEI 61386 spécifie les règles et les essais applicables aux systèmes de conduits, incluant conduits et accessoires de conduits, pour la protection et le rangement des conducteurs et/ou des câbles isolés dans les installations électriques ou les systèmes de télécommunication jusqu'à 1 000 V c.a. et/ou 1 500 V c.c. Cette deuxième édition annule et remplace la première édition publiée en 1996 et son Amendement 1 (2000), et constitue une révision technique. Les modifications par rapport à la première édition sont les suivantes:
- modification de la longueur de l'échantillon d'essai entre accessoires pour l'essai de traction,
- mises à jour éditoriales et des références normatives.

General Information

Status
Published
Publication Date
24-Apr-2017
Current Stage
PPUB - Publication issued
Start Date
15-Mar-2008
Completion Date
22-Feb-2008
Ref Project

Relations

Buy Standard

Standard
IEC 61386-1:2008 - Conduit systems for cable management - Part 1: General requirements
English and French language
76 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 61386-1:2008+AMD1:2017 CSV - Conduit systems for cable management - Part 1: General requirements Released:4/25/2017 Isbn:9782832242575
English and French language
159 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61386-1
Edition 2.0 2008-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Conduit systems for cable management –
Part 1: General requirements
Systèmes de conduits pour la gestion du câblage –
Partie 1: Exigences générales
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61386-1
Edition 2.0 2008-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Conduit systems for cable management –
Part 1: General requirements
Systèmes de conduits pour la gestion du câblage –
Partie 1: Exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
W
CODE PRIX
ICS 29.120.10 ISBN 2-8318-9623-1

– 2 – 61386-1 © IEC:2008
CONTENTS
FOREWORD.4

1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 General requirements .8
5 General conditions for tests.8
6 Classification.9
6.1 According to mechanical properties .9
6.1.1 Resistance to compression.9
6.1.2 Resistance to impact .9
6.1.3 Resistance to bending .10
6.1.4 Tensile strength.10
6.1.5 Suspended load capacity.10
6.2 According to temperature .10
6.2.1 Lower temperature range.10
6.2.2 Upper temperature range.11
6.3 According to electrical characteristics.11
6.3.1 With electrical continuity characteristics .11
6.3.2 With electrical insulating characteristics .11
6.3.3 With electrical continuity and insulating characteristics.11
6.4 According to resistance to external influences .11
6.4.1 Protection against ingress of solid objects: protection in accordance
with IEC 60529 to a minimum of IP3X.11
6.4.2 Protection against ingress of water: protection in accordance with
IEC 60529 to a minimum of IPX0 .11
6.4.3 Resistance against corrosion.11
6.5 According to resistance to flame propagation .11
6.5.1 Non-flame propagating .11
6.5.2 Flame propagating.11
7 Marking and documentation.11
8 Dimensions .12
9 Construction .12
10 Mechanical properties .14
10.1 Mechanical strength .14
10.2 Compression test .15
10.3 Impact test .15
10.4 Bending test .16
10.5 Flexing test .16
10.6 Collapse test .16
10.7 Tensile test .16
10.8 Suspended load test.17
11 Electrical properties.18
11.1 Electrical requirements.18
11.2 Bonding test .18
11.3 Dielectric strength and insulation resistance.19

61386-1 © IEC:2008 – 3 –
12 Thermal properties .20
13 Fire hazard.21
13.1 Reaction to fire.21
13.1.1 Initiation of fire .21
13.1.2 Contribution to fire.21
13.1.3 Spread of fire .21
13.1.4 Additional reaction to fire characteristics .23
13.2 Resistance to fire .23
14 External influences .23
14.1 Degree of protection provided by enclosure.23
14.1.1 General .23
14.1.2 Degree of protection – Ingress of foreign solid objects.23
14.1.3 Degree of protection – Ingress of water .23
14.2 Resistance against corrosion.24
15 Electromagnetic compatibility .25

Annex A (normative) Classification coding for conduit systems .33
Annex B (normative) Determination of material thickness.36

Bibliography.38

Figure 1 – Arrangement for compression test.26
Figure 2 – Impact test apparatus.26
Figure 3 – Assembly of conduit and conduit fitting for bonding test .27
Figure 4 – Arrangement for dielectric strength and insulation resistance tests – Rigid
conduit.28
Figure 5 – Arrangement for dielectric strength and insulation resistance tests – Pliable
and flexible conduit.29
Figure 6 – Steel enclosure for test for resistance to flame propagation .30
Figure 7 – Test arrangement for resistance to flame propagation .31
Figure 8 – Test apparatus for resistance to heat .32

Table 1 – Lower temperature range .10
Table 2 – Upper temperature range .11
Table 3 – Torque values for screw tests.14
Table 4 – Compression force .15
Table 5 – Impact test values .16
Table 6 – Tensile force .17
Table 7 – Suspended load .18
Table 8 – Load for heating test .20
Table 9
...


IEC 61386-1 ®
Edition 2.1 2017-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Conduit systems for cable management –
Part 1: General requirements
Systèmes de conduits pour la gestion du câblage –
Partie 1: Exigences générales
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC
65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte,
et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les
publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées.
antérieures extraites des publications des CE 37, 77, 86 et

CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Restez informé sur les nouvelles publications IEC. Just Service Clients - webstore.iec.ch/csc
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61386-1 ®
Edition 2.1 2017-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Conduit systems for cable management –

Part 1: General requirements
Systèmes de conduits pour la gestion du câblage –

Partie 1: Exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.10 ISBN 978-2-8322-4257-5

IEC 61386-1 ®
Edition 2.1 2017-04
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Conduit systems for cable management –
Part 1: General requirements
Systèmes de conduits pour la gestion du câblage –
Partie 1: Exigences générales
– 2 – IEC 61386-1:2008+AMD1:2017 CSV
 IEC 2017
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General requirements . 8
5 General conditions for tests . 8
6 Classification . 9
6.1 According to mechanical properties . 9
6.1.1 Resistance to compression . 9
6.1.2 Resistance to impact . 10
6.1.3 Resistance to bending . 10
6.1.4 Tensile strength . 10
6.1.5 Suspended load capacity . 10
6.2 According to temperature . 10
6.2.1 Lower temperature range . 10
6.2.2 Upper temperature range . 11
6.3 According to electrical characteristics . 11
6.3.1 With electrical continuity characteristics . 11
6.3.2 With electrical insulating characteristics . 11
6.3.3 With electrical continuity and insulating characteristics . 11
6.4 According to resistance to external influences . 11
6.4.1 Protection against ingress of solid objects: protection in accordance

with IEC 60529 to a minimum of IP3X . 11
6.4.2 Protection against ingress of water: protection in accordance with
IEC 60529 to a minimum of IPX0 . 11
6.4.3 Resistance against corrosion . 11
6.5 According to resistance to flame propagation . 11
6.5.1 Non-flame propagating . 11
6.5.2 Flame propagating . 11
7 Marking and documentation . 11
8 Dimensions . 13
9 Construction . 13
10 Mechanical properties . 15
10.1 Mechanical strength . 15
10.2 Compression test . 15
10.3 Impact test . 16
10.4 Bending test . 17
10.5 Flexing test . 17
10.6 Collapse test . 17
10.7 Tensile test . 17
10.8 Suspended load test . 18
11 Electrical properties . 19
11.1 Electrical requirements . 19
11.2 Bonding test . 19
11.3 Dielectric strength and insulation resistance . 19

 IEC 2017
12 Thermal properties . 21
13 Fire hazard . 21
13.1 Reaction to fire . 21
13.1.1 Initiation of fire . 21
13.1.2 Contribution to fire . 22
13.1.3 Spread of fire . 22
13.1.4 Additional reaction to fire characteristics . 23
13.2 Resistance to fire . 23
14 External influences . 24
14.1 Degree of protection provided by enclosure . 24
14.1.1 General . 24
14.1.2 Degree of protection – Ingress of foreign solid objects . 24
14.1.3 Degree of protection – Ingress of water . 24
14.2 Resistance against corrosion . 24
15 Electromagnetic compatibility . 26
Annex A (normative) Classification coding for conduit systems . 34
Annex B (normative) Determination of material thickness . 37
Annex C (normative) Additional test requirements for conduit systems already
complying with IEC 61386-1:2008 . 39
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.