Amendment 1 - Electromagnetic compatibility of multimedia equipment - Emission requirements

Gives requirements for flexible polyester (PETP) films coated on one side or both with polyester, acrylic or epoxide type adhesive for use in the fabrication of flexible printed wring.[
]Films coated on only one side are used as a coverlay or covercoat in the fabrication of flexible printed wiring. This coverlay or covercoat is also used to provide local support to areas subjected to mechanical or environmental stress.[
]Films coated on both sides are used as bonding films in the fabrication of printed boards.

Amendement 1 - Compatibilité électromagnétique des équipements multimédia - Exigences d'émission

General Information

Status
Published
Publication Date
30-Sep-2019
Current Stage
PPUB - Publication issued
Start Date
20-Sep-2019
Completion Date
01-Oct-2019
Ref Project

Relations

Buy Standard

Standard
CISPR 32:2015/AMD1:2019 - Amendment 1 - Electromagnetic compatibility of multimedia equipment - Emission requirements
English and French language
91 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


CISPR 32 ®
Edition 2.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INT ERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
C OMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES

AMENDMENT 1
AMENDEMENT 1
Electromagnetic compatibility of multimedia equipment – Emission
requirements
Compatibilité électromagnétique des équipements multimédia – Exigences
d'émission
CISPR 32:2015-03/AMD1:2019-10(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and Definitions clause of IEC
publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or need CISPR.

further assistance, please contact the Customer Service

Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Le premier dictionnaire d'électrotechnologie en ligne au monde,
webstore.iec.ch/advsearchform avec plus de 22 000 articles terminologiques en anglais et en
La recherche avancée permet de trouver des publications IEC français, ainsi que les termes équivalents dans 16 langues
en utilisant différents critères (numéro de référence, texte, additionnelles. Egalement appelé Vocabulaire
comité d’études,…). Elle donne aussi des informations sur les Electrotechnique International (IEV) en ligne.

projets et les publications remplacées ou retirées.
Glossaire IEC - std.iec.ch/glossary
IEC Just Published - webstore.iec.ch/justpublished 67 000 entrées terminologiques électrotechniques, en anglais
Restez informé sur les nouvelles publications IEC. Just et en français, extraites des articles Termes et Définitions des
Published détaille les nouvelles publications parues. publications IEC parues depuis 2002. Plus certaines entrées
Disponible en ligne et une fois par mois par email. antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
Electropedia - www.electropedia.org

CISPR 32 ®
Edition 2.0 2019-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INT ERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE

C OMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES

AMENDMENT 1
AMENDEMENT 1
Electromagnetic compatibility of multimedia equipment – Emission

requirements
Compatibilité électromagnétique des équipements multimédia – Exigences

d'émission
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10 ISBN 978-2-8322-7314-2

– 2 – CISPR 32:2015/AMD1:2019
© IEC 2019
FOREWORD
This amendment has been prepared by subcommittee CISPR I: Electromagnetic compatibility
of information technology equipment, multimedia equipment and receivers, of IEC technical
committee CISPR: International special committee on radio interference.
The text of this amendment is based on the following documents:
FDIS Report on voting
CIS/I/617/FDIS CIS/I/623/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

___________
1 Scope
Delete the second paragraph starting with "Equipment within the scope.".
Replace the fourth paragraph with the following:
The emission requirements in this standard are not intended to be applicable to the intentional
transmissions from a radio communication device operated in accordance with the ITU-R Radio
Regulations, nor to any spurious emissions related to these intentional transmissions.
Replace the fifth paragraph with the following:
Equipment for which emission requirements in the frequency range covered by this publication
are explicitly formulated in other CISPR publications is excluded from the scope of this
publication.
© IEC 2019
2 Normative references
Replace the existing reference to CISPR 16-1-1:2010 and its amendments with:
CISPR 16-1-1:2015, Specification for radio disturbance and immunity measuring apparatus and
methods – Part 1-1: Radio disturbance and immunity measuring apparatus – Measuring
apparatus
Replace the existing reference to CISPR 16-1-2:2003 and its amendments with:
CISPR 16-1-2:2014, Specification for radio disturbance and immunity measuring apparatus and
methods – Part 1-2: Radio disturbance and immunity measuring apparatus – Coupling devices
for conducted disturbance measurements
CISPR 16-1-2:2014/AMD1:2017
Add to CISPR 16-1-4:2010 the following amendment:
CISPR 16-1-4:2010/AMD2:2017
Replace the existing reference to CISPR 16-2-1:2008 and its amendments with:
CISPR 16-2-1:2014, Specification for radio disturbance and immunity measuring apparatus and
methods – Part 2-1: Methods of measurement of disturbances and immunity – Conducted
disturbance measurements
CISPR 16-2-1:2014/AMD1:2017
Replace the existing reference to CISPR 16-2-3:2010 and its amendments with:
CISPR 16-2-3:2016, Specification for radio disturbance and immunity measuring apparatus and
methods – Part 2-3: Methods of measurement of disturbances and immunity – Radiated
disturbance measurements
Add to CISPR 16-4-2:2011 the following amendments:
CISPR 16-4-2:2011/AMD1:2014
CISPR 16-4-2:2011/AMD2:2018
Delete the normative reference to ANSI C63.5-2006
Add the following new references to the existing list:
CISPR 16-1-5:2014, Specification for radio disturbance and immunity measuring apparatus and
methods – Part 1-5: Radio disturbance and immunity measuring apparatus – Antenna
calibration sites and reference test sites for 5 MHz to 18 GHz
CISPR 16-1-5:2014/AMD1:2016
CISPR 16-1-6:2014, Specification for radio disturbance and immunity measuring apparatus and
methods – Part 1-6: Radio disturbance and immunity measuring apparatus – EMC antenna
calibration
CISPR 16-1-6:2014/AMD 1:2017
As a consequence of the above updates to CISPR 16 normative references the following
references throughout the standard require updating as follows. NOTE: some of these may
already be addressed with other changes given in this document:

– 4 – CISPR 32:2015/AMD1:2019
© IEC 2019
Location of reference Replace the existing reference by the following new reference
Clause 2 Footnote 1 to CISPR 16-1-2 Delete Footnote 1 related to CISPR 16-1-2
References
Clause 2 Footnote 2 to CISPR 16-2-1 Delete Footnote 2 related to CISPR 16-2-1
References
3.1.9 CISPR 16-2-1 3.1.28 of CISPR 16-2-1:2014/AMD1:2017
Clause 9 Table 1 of CISPR 16-4-2:2011 Table 1 of CISPR 16-4-2: 2011/
AMD1:2014/AMD2:2018
Clause 11 CISPR 16-4-2 CISPR 16-4-2:
2011/AMD1:2014/AMD2:2018, Clauses 5,
7 and 8
Table A.1, footnote to CISPR 16-1-4:2010 /AMD1:2012 Delete Note to Table
table
Table A.1, footnote to CISPR 16-2-3:2010/ AMD1:2010 Delete Note to Table
table
Table A1.1 5.3 of CISPR 16-1-4:2010/AMD1:2012 5.3 of CISPR 16-1-4:2010/AMD1:2012
Table A1.1 7.3 of CISPR 16-2-3:2010 7.3 of CISPR 16-2-3:2016
Table A1.2 5.2 of CISPR 16-1-4:2010/AMD1:2012 5.2 of CISPR 16-1-4:2010/AMD1:2012
Table A1.2 7.3 of CISPR 16-2-3:2010 7.3 of CISPR 16-2-3:2016
Table A1.3 8.3 of CISPR 16-1-4:2010/AMD1:2012 8.3 of CISPR 16-1-4:2010/
AMD1:2012/AMD2:2017
Table A1.3 7.6.6 of CISPR 16-2-3:2010 7.6.6 of CISPR 16-2-3:2016
Table A1.4 5.4.7 of CISPR 16-1-4:2010/AMD1:2012 5.4.7 of CISPR 16-1-4:2010/AMD1:2012
Table A1.4 Annex C and 7.4 of CISPR 16-2-3:2010 7.4 of CISPR 16-2-3:2016
Table A.8, footnote to Delete Note to Table
CISPR 16-1-2:2003/AMD1:2004/ AMD
table 2:2006
Table A.8, footnote to CISPR 16-2-1:2008/AMD1:2010 Delete Note to Table
table /AMD2:2013
Table A8.1 Clause 4 of CISPR 16-1-2:2003 Clause 4 of CISPR 16-1-2:2014/
AMD1:2017
Table A8.1 Clause 7 of CISPR 16-2-1:2008 Clause 7 of CISPR 16-2-1:2014/
AMD1:2017
Table A8.2 Clause 7 of CISPR 16-1-2:2003 Clause 7 of CISPR 16-1-2:2014
Table A8.2 Clause 7 of CISPR 16-2-1:2008 Clause 7 of CISPR 16-2-1:2014/
AMD1:2017
Table A8.3 5.1 of CISPR 16-1-2:2003 5.1 of CISPR 16-1-2:2014
Table A8.3 Clause 7 of CISPR 16-2-1:2008 Clause 7 of CISPR 16-2-1:2014/
AMD1:2017
Table A8.4 5.2.2 of CISPR 16-1-2:2003 5.2.2 of CISPR 16-1-2:2014
Table A8.4 Clause 7 of CISPR 16-2-1:2008 Clause 7 of CISPR 16-2-1:2014/
AMD1:2017
Table C.1 row 6 CISPR 16-1-2:2003/AMD1:2004/ CISPR 16-1-2:2014/AMD1:2017, Figure 5
AMD2:2006, Figure 5 and Figure 6
C.2.2.1 CISPR 16-1-1:2010, Clause 2 CISPR 16-1-1:2015, Clauses 4, 5, 6 and 7
C.2.2.1 CISPR 16-1-1:2010, Clause 6 CISPR 16-1-1:2015, Clause 6
C.2.2.3 Annex A of CISPR 16-2-3:2010/ Annex A of CISPR 16-2-3:2016
AMD1:2010
C.2.2.4 Tables 1 and 2 of CISPR 16-1-4:2010/ Tables 8, 9 and 10 of CISPR 16-1-4:2010/
AMD1:2012 AMD1:2012
C.3.5 6.5.1 of CISPR 16-2-1:2008/ 6.5.1 of CISPR 16-2-1:2014
AMD1:2010/AMD 2:2013
C.3.6 6.5.1 of CISPR 16-2-1:2008/ 6.5.1 of CISPR 16-2-1:2014
AMD1:2010/AMD 2:2013
© IEC 2019
Location of reference Replace the existing reference by the following new reference
C.3.7 6.5.1 of CISPR 16-2-1:2008/ 6.5.1 of CISPR 16-2-1:2014
AMD1:2010/AMD 2:2013
C.3.8 6.5.1 of CISPR 16-2-1:2008/ 6.5.1 of CISPR 16-2-1:2014
AMD1:2010/AMD 2:2013
C.4.1.4 5.1 of CISPR 16-1-2:2003/ 5.1 of CISPR 16-1-2:2014
AMD1:2004/AMD 2:2006
C.4.1.5 5.2.2 of CISPR 16-1-2:2003/ 5.2.2 of CISPR 16-1-2:2014
AMD1:2004/AMD 2:2006
C.4.4 CISPR 16-1-4:2010/AMD1:2012 CISPR 16-1-4:2010/AMD1:2012, 5.4
5.5.2 of CISPR 16-1-4:2010/
D.1.2 5.5.2 of CISPR 16-1-4:2010/ AMD1:2012
AMD1:2012
G.2.3 5.2.2 of CISPR 16-1-2:2003/ 5.2.2 of CISPR 16-1-2:2014
AMD1:2004/AMD 2:2006
Annex E Annex B of CISPR 16-2-1:2008/ Annex B of CISPR 16-2-1:2014
AMD1:2010/AMD 2:2013
3.1 Terms and definitions
3.1.30
signal/control port
Replace the existing Note 1 to entry with the following note:
Note 1 to entry: Examples include RS-232, Universal Serial Bus (USB), High-Definition Multimedia Interface (HDMI),
IEEE Standard 1394 (“Fire Wire”), and waveguide ports used for interconnecting MME.
3.2 Abbreviations
Add the following abbreviation to the existing list:
PSD Power Spectral Density
6.2 Host systems and modular EUT
Replace the third bullet with the following new bullet:
• a plug-in module, for example a portable memory drive;
9 Test report
Replace, in the second bullet point of the last existing list, "Table 1 of CISPR 16-4-2:20
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.