IEC 61158-3-8:2007
(Main)Industrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements
Industrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements
IEC 61158-3-8:2007 defines in an abstract way the externally visible service provided by the Type 8 fieldbus data-link layer in terms of:
- the primitive actions and events of the service;
- the parameters associated with each primitive action and event, and the form which they take;
- and the interrelationship between these actions and events, and their valid sequences. This first edition and its companion parts of the IEC 61158-3 subseries cancel and replace IEC 61158-3:2003. This edition of this part constitutes an editorial revision. This edition includes the following changes:
- deletion of the former Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-link layer, for lack of market relevance;
- addition of new types of fieldbuses;
- division of this part into multiple parts numbered 3-1, 3-2,..., 3-19. This bilingual version (2013-07) corresponds to the monolingual English version, published in 2007-12.
Réseaux de communication industriels - Spécifications des bus de terrrain - Partie 3-8: Définition du service de la couche de liaison de données - Éléments de Type 8
La CEI 61158-3-8:2007 définit de manière abstraite les services visibles de l'extérieur fournis par la couche de liaison de données de bus de terrain Type 8 en termes:
- des actions et événements primitifs de service;
- des paramètres associés à chaque action primitive et événement primitif, et la forme qu'ils prennent;
- de l'interrelation entre ces actions et événements, et leurs séquences valides. Cette première édition et ses parties associées de la sous-série de la CEI 61158-3 annulent et remplacent la CEI 61158-3:2003. L'édition de cette partie constitue une révision rédactionnelle. Cette édition inclut les changements suivants:
- suppression du précédent bus de terrain de Type 6 et du réceptacle (placeholder) pour une couche de liaison de données de bus de terrain de Type 5 en raison d'un manque de pertinence commerciale;
- ajout de nouveaux types de bus de terrain; division de cette partie en plusieurs parties numérotées 3-1, 3-2, ...., 3-19. La présente version bilingue (2013-07) correspond à la version anglaise monolingue publiée en 2007-12.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61158-3-8
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 3-8: Data-link layer service definition – Type 8 elements
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61158-3-8
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 3-8: Data-link layer service definition – Type 8 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
V
ICS 35.100.20; 25.040.40 ISBN 2-8318-9414-X
– 2 – 61158-3-8 © IEC:2007(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
1.1 Overview .7
1.2 Specifications .7
1.3 Conformance.7
2 Normative references.8
3 Terms, definitions, symbols, abbreviations and conventions .8
3.1 Reference model terms and definitions .8
3.2 Service convention terms and definitions .9
3.3 Common data-link service terms and definitions.9
3.4 Additional Type 8 data-link specific definitions.11
3.5 Common symbols and abbreviations .12
3.6 Common conventions .12
4 Data-link service and concepts .13
4.1 Overview .13
4.2 Sequence of primitives .15
4.3 Connection-mode data-link services.18
5 DL-management service .22
5.1 Scope.22
5.2 Facilities of the DL-management service.22
5.3 Overview of services.22
5.4 Overview of interactions.23
5.5 Detailed specification of services and interactions.26
Bibliography .32
Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses .10
Figure 2 – Relationships of DLCEPs and DLCEP-addresses to default DLSAP.14
Figure 3 – Sequence of primitives for the buffer data transfer .17
Figure 4 – Normal data transfer service between a master and a slave .18
Figure 5 – Sequence of primitives for a failed normal data transfer .18
Figure 6 – Sequence of primitives for the reset service .24
Figure 7 – Sequence of primitives for the event service .24
Figure 8 – Sequence of primitives for the set value service.25
Figure 9 – Sequence of primitives for the get value service.25
Figure 10 – Sequence of primitives for the get current configuration service .25
Figure 11 – Sequence of primitives for the get active configuration service .25
Figure 12 – Sequence of primitives for the set active configuration service .26
Table 1 – Summary of DL-connection-mode primitives and parameters.16
Table 2 – Put buffer primitive and parameters .19
Table 3 – Get buffer primitive and parameters .19
Table 4 – Buffer received primitive and parameters .20
Table 5 – Normal data transfer primitive and parameters .21
61158-3-8 © IEC:2007(E) – 3 –
Table 6 – Summary of DL-management primitives and parameters .24
Table 7 – Reset service primitives and parameters .26
Table 8 – Event service primitive and parameters.27
Table 9 – Set value service primitives and parameters.27
Table 10 – Get value service primitives and parameters .28
Table 11 – Get current configuration service primitives and parameters .29
Table 12 – Get active configuration service primitives and parameters.30
Table 13 – The active configuration parameter .30
Table 14 – Set active configuration service primitives and parameters .31
– 4 – 61158-3-8 © IEC:2007(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 3-8: Data-link layer service definition – Type 8 elements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
NOTE Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all
cases, the commitment to limited release of intellectual-property-rights made by the holders of those rights permits
a particular data-link layer protocol type to be used with physical layer and application layer protocols in type
combinations as specified explicitly in the IEC 61784 series. Use of the various protocol types in other combinations
may require permission of their respective intellectual-property-right holders.
International Standard IEC 61158-3-8 has been prepared by subcommittee 65C: Industrial
networks, of IEC technical committee 65: Industrial-process measurement, control and
automation.
This first edition and its companion parts of the IEC 61158-3 subseries cancel and replace
IEC 61158-3:2003. This edition of this part constitutes an editorial revision.
This edition includes the following significant changes with respect to the previous edition:
a) deletion of the former Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-link
layer, for lack of market relevance;
b) addition of new types of fieldbuses;
c) division of this part into multiple parts numbered 3-1, 3-2, …, 3-19.
61158-3-8 © IEC:2007(E) – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
65C/473/FDIS 65C/484/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under http://webstore.iec.ch in the data
related to the specific publication. At this date, the publication will be:
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
NOTE The revision of this standard will be synchronized with the other parts of the IEC 61158 series.
The list of all the parts of the IEC 61158 series, under the general title Industrial
communication networks – Fieldbus specifications, can be found on the IEC web site.
– 6 – 61158-3-8 © IEC:2007(E)
INTRODUCTION
This part of IEC 61158 is one of a series produced to facilitate the interconnection of
automation system components. It is related to other standards in the set as defined by the
“three-layer” fieldbus reference model described in IEC
...
IEC 61158-3-8 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 3-8: Data-link layer service definition – Type 8 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 3-8: Définition du service de la couche de liaison de données –
Éléments de Type 8
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.
IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 61158-3-8 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 3-8: Data-link layer service definition – Type 8 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 3-8: Définition du service de la couche de liaison de données –
Éléments de Type 8
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 25.040.40; 35.100.20 ISBN 978-2-8322-0989-9
– 2 – 61158-3-8 © IEC:2007
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
1.1 Overview . 7
1.2 Specifications . 7
1.3 Conformance . 7
2 Normative references. 8
3 Terms, definitions, symbols, abbreviations and conventions . 8
3.1 Reference model terms and definitions . 8
3.2 Service convention terms and definitions . 9
3.3 Common data-link service terms and definitions . 9
3.4 Additional Type 8 data-link specific definitions. 11
3.5 Common symbols and abbreviations . 12
3.6 Common conventions . 12
4 Data-link service and concepts . 13
4.1 Overview . 13
4.2 Sequence of primitives . 15
4.3 Connection-mode data-link services . 18
5 DL-management service . 22
5.1 Scope . 22
5.2 Facilities of the DL-management service . 22
5.3 Overview of services . 22
5.4 Overview of interactions . 23
5.5 Detailed specification of services and interactions . 26
Bibliography . 32
Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses . 10
Figure 2 – Relationships of DLCEPs and DLCEP-addresses to default DLSAP . 14
Figure 3 – Sequence of primitives for the buffer data transfer . 17
Figure 4 – Normal data transfer service between a master and a slave . 18
Figure 5 – Sequence of primitives for a failed normal data transfer . 18
Figure 6 – Sequence of primitives for the reset service . 24
Figure 7 – Sequence of primitives for the event service . 24
Figure 8 – Sequence of primitives for the set value service . 25
Figure 9 – Sequence of primitives for the get value service . 25
Figure 10 – Sequence of primitives for the get current configuration service . 25
Figure 11 – Sequence of primitives for the get active configuration service . 25
Figure 12 – Sequence of primitives for the set active configuration service . 26
Table 1 – Summary of DL-connection-mode primitives and parameters . 16
Table 2 – Put buffer primitive and parameters . 19
Table 3 – Get buffer primitive and parameters . 19
Table 4 – Buffer received primitive and parameters . 20
Table 5 – Normal data transfer primitive and parameters . 21
61158-3-8 © IEC:2007 – 3 –
Table 6 – Summary of DL-management primitives and parameters . 24
Table 7 – Reset service primitives and parameters . 26
Table 8 – Event service primitive and parameters . 27
Table 9 – Set value service primitives and parameters . 27
Table 10 – Get value service primitives and parameters . 28
Table 11 – Get current configuration service primitives and parameters . 29
Table 12 – Get active configuration service primitives and parameters . 30
Table 13 – The active configuration parameter . 30
Table 14 – Set active configuration service primitives and parameters . 31
– 4 – 61158-3-8 © IEC:2007
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
FIELDBUS SPECIFICATIONS –
Part 3-8: Data-link layer service definition – Type 8 elements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.