ISO/IEC 19763-16:2021/Amd 1:2023

Information technology — Metamodel framework for interoperability (MFI) — Part 16: Metamodel for document model registration — Amendment 1: Alignment with Edition 4 of ISO/IEC 11179-3

Titre manque — Partie 16: Titre manque — Amendement 1: Alignement avec l'édition 4 de l'ISO/IEC 11179-3

General Information

• Status: Published
• Publication Date: 06-Dec-2023
• ICS: 35.040.50 - Automatic identification and data capture techniques
• Technical Committee: ISO/IEC JTC 1/SC 32 - Data management and interchange
• Drafting Committee: ISO/IEC JTC 1/SC 32 - Data management and interchange
• Current Stage: 6060 - International Standard published
• Start Date: 07-Dec-2023
• Due Date: 04-Jul-2025
• Completion Date: 07-Dec-2023

Relations

• Amends: ISO/IEC 19763-16:2021 - Information technology — Metamodel framework for interoperability (MFI) — Part 16: Metamodel for document model registration
• Effective Date: 07-Jul-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 19763-16
First edition
2021-09
AMENDMENT 1
2023-12
Information technology — Metamodel
framework for interoperability
(MFI) —
Part 16:
Metamodel for document model
registration
AMENDMENT 1: Alignment with Edition
4 of ISO/IEC 11179-3
Reference number
ISO/IEC 19763-16:2021/Amd. 1:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 19763-16:2021/Amd. 1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 19763-16:2021/Amd. 1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of
any claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC
had not received notice of (a) patent(s) which may be required to implement this document. However,
implementers are cautioned that this may not represent the latest information, which may be obtained
from the patent database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall
not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 32, Data management and Interchange.
A list of all parts in the ISO/IEC 19763 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html and
www.iec.ch/national-committees.
iii
© ISO/IEC 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO/IEC 19763-16:2021/Amd. 1:2023(E)
Information technology — Metamodel framework for
interoperability (MFI) —
Part 16:
Metamodel for document model registration
AMENDMENT 1: Alignment with Edition 4 of ISO/IEC 11179-3

Introduction
Replace the reference to “ISO/IEC 11179-3:2013, Clause 6, 7 and 8” with “ISO/IEC 11179-3:2023”

Normative references
Replace the reference to “ISO/IEC 19763-10:2014” with the following:
ISO/IEC 19763-10:2023, Information technology — Metamodel framework for interoperability
(MFI) — Part 10: Core model and basic mapping
Replace the reference to “ISO/IEC 11179-3:2013” with the following:
ISO/IEC 11179-3:2023, Information technology — Metadata registries (MDR) — Part 3: Metamodel
for registry common facilities

Abbreviated terms
Replace the entry for “MDR Metamodel” with the following:
Metadata registries metamodel for registry common facilities

5.1, First paragraph
In the list of classes, alongside “Namespace”, replace the reference
...

INTERNATIONAL ISO/IEC
STANDARD 19763-16
First edition
2021-09
AMENDMENT 1
Information technology — Metamodel
framework for interoperability
(MFI) —
Part 16:
Metamodel for document model
registration
AMENDMENT 1: Alignment with Edition
4 of ISO/IEC 11179-3
PROOF/ÉPREUVE
Reference number
ISO/IEC 19763-16/Amd. 1:2023(E)
© ISO/IEC 2023

---------------------- Page: 1 ----------------------
ISO/IEC 19763-16/Amd. 1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 19763-16/Amd. 1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance
are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria
needed for the different types of document should be noted. This document was drafted in
accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives or
www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this document may involve the
use of (a) patent(s). ISO and IEC take no position concerning the evidence, validity or applicability of
any claimed patent rights in respect thereof. As of the date of publication of this document, ISO and IEC
had not received notice of (a) patent(s) which may be required to implement this document. However,
implementers are cautioned that this may not represent the latest information, which may be obtained
from the patent database available at www.iso.org/patents and https://patents.iec.ch. ISO and IEC shall
not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html. In the IEC, see www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 32, Data management and Interchange.
A list of all parts in the ISO/IEC 19763 series can be found on the ISO and IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html and
www.iec.ch/national-committees.
iii
© ISO/IEC 2023 – All rights reserved PROOF/ÉPREUVE

---------------------- Page: 3 ----------------------
ISO/IEC 19763-16/Amd. 1:2023(E)
Information technology — Metamodel framework for
interoperability (MFI) —
Part 16:
Metamodel for document model registration
AMENDMENT 1: Alignment with Edition 4 of ISO/IEC 11179-3

Introduction
Replace the reference to “ISO/IEC 11179-3:2013, Clause 6, 7 and 8” with “ISO/IEC 11179-3:2023”

Normative references
Replace the reference to “ISO/IEC 19763-10:2014” with the following:
ISO/IEC 19763-10:2023, Information technology — Metamodel framework for interoperability
(MFI) — Part 10: Core model and basic mapping
Replace the reference to “ISO/IEC 11179-3:2013” with the following:
ISO/IEC 11179-3:2023, Information technology — Metadata registries (MDR) — Part 3: Metamodel
for registry common facilities

Abbreviated terms
Replace the entry for “MDR Metamodel” with the following:
Metadata registries metamodel for registry common facilities

5.1, First paragraph
In the list of classes, alongside “Namespace”, replace th
...

2023-09-20
ISO/IEC 19763-16:2021/DAMPRF Amd 1:2023(E)
ISO/IEC JTC 1/SC 32/WG 2
Secretariat: ANSI
Date: 2023-10-12
Information technology — Metamodel framework for intero
perability (MFI) —

Part 16:
Metamodel for document model registration
AMENDMENT 1: Alignment with Edition 4 of ISO/IEC 11179-3
FDIS stage
© ISO/IEC 2023 – All rights reserved

---------------------- Page: 1 ----------------------
ISO/IEC 19763-16:2021/DAMPRF Amd 1:2023(E)
© ISO 2023/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Fax: [phone]
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO/IEC 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 19763-16:2021/DAMPRF Amd 1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide federation of national
standardsstandardization. National bodies (that are members of ISO member bodies). The workor IEC
participate in the development of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has
been established has the right to be represented on that committee. Internationalby the respective
organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-
governmental, in liaison with ISO and IEC, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documentsdocument should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives 2 (see
www.iso.org/directives or www.iec.ch/members_experts/refdocs).
Attention is drawnISO and IEC draw attention to the possibility that some of the elementsimplementation
of this document may beinvolve the subjectuse of (a) patent rights. ISO(s). ISO and IEC take no position
concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the
date of publication of this document, ISO and IEC had not received notice of (a) patent(s) which may be
required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at www.iso.org/patents
and https://patents.iec.ch. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html) see www.iso.org/iso/foreword.html. In the IEC, see
www.iec.ch/understanding-standards.
This document was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 32, Data management and Interchange.
A list of all parts in the ISO/IEC 19763 series can be found on the ISO websiteand IEC websites.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.htmlwww.iso.org/members.html
and www.iec.ch/national-committees.
© ISO/IEC 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 19763-16:2021/PRF Amd 1(E)
Information technology — Metamodel framework for
interoperability (MFI) —
Part 16:
Metamodel for document model registration
...