ISO/TS 15143-3:2016

Earth-moving machinery and mobile road construction machinery — Worksite data exchange — Part 3: Telematics data

ISO 15143-3:2016 specifies the communication schema designed to provide mobile machinery status data from a telematics provider's server to third-party client applications via the Internet. The data are collected from a mobile machine using telematics data-logging equipment and stored on a telematics provider's server. This document describes the communications records used to request data from the server and the responses from the server containing specified data elements to be used in the analysis of machine performance and health.

Engins de terrassement et machines mobiles de construction de routes — Échange de données sur le chantier — Partie 3: Données télématiques

General Information

• Status: Withdrawn
• Publication Date: 27-Nov-2016
• Withdrawal Date: 27-Nov-2016
• ICS: 35.240.99 - IT applications in other fields
• ICS: 53.100 - Earth-moving machinery
• Technical Committee: ISO/TC 127/SC 3 - Machine characteristics, electrical and electronic systems, operation and maintenance
• Drafting Committee: ISO/TC 127/SC 3 - Machine characteristics, electrical and electronic systems, operation and maintenance
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 29-Jan-2020

Relations

• Revised: ISO/TS 15143-3:2020 - Earth-moving machinery and mobile road construction machinery — Worksite data exchange — Part 3: Telematics data
• Effective Date: 07-Jul-2018

Standards Content (Sample)

TECHNICAL ISO/TS
SPECIFICATION 15143-3
First edition
2016-12-01
Earth-moving machinery and mobile
road construction machinery —
Worksite data exchange —
Part 3:
Telematics data
Engins de terrassement et machines mobiles de construction de
routes — Échange de données sur le chantier —
Partie 3: Données télématiques
Reference number
ISO/TS 15143-3:2016(E)
©
ISO 2016

---------------------- Page: 1 ----------------------
ISO/TS 15143-3:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/TS 15143-3:2016(E)

Contents Page
Foreword .vii
Introduction .viii
1 Scope . 1
2 Normative references . 2
3 Terms, definitions and abbreviated terms . 2
4 Data management and access control . 4
4.1 Minimum requesting period . 4
4.2 Editing the data elements over time . 5
4.3 Data element use case . 5
4.4 Data element cross reference . 5
4.5 Access authentication . 5
5 Response formats . 5
6 XML Declaration links to definition segments . 6
7 Paging . 6
8 Discoverability . 6
8.1 General . 6
8.2 Snapshot endpoint . 6
8.2.1 Fleet snapshot . 6
8.2.2 Single-element snapshot . 7
8.3 Time series endpoint . 8
8.3.1 General. 8
8.4 Links . 9
8.4.1 Reference attribute (rel) . 9
8.4.2 Hypermedia reference URL (href) . 9
9 Date and time formats . 9
10 Data fields summary .10
11 Data field descriptions .12
11.1 General .12
11.2 Machine header information .13
11.2.1 General.13
11.2.2 Telematics unit installation date .13
11.2.3 Equipment make .13
11.2.4 Equipment model .13
11.2.5 Equipment ID .13
11.2.6 Serial Number .13
11.2.7 OEM ISO Identifier (PIN or VIN).13
11.3 Last known location .14
11.3.1 General.14
11.3.2 Date and time of location .14
11.3.3 Latitude of location .14
11.3.4 Longitude of location .14
11.3.5 Altitude of location . .14
11.3.6 Unit of measure of altitude.14
11.3.7 Location Time Series Endpoint (Request) .14
11.3.8 Location Response Schema (Response) .15
11.4 Operating hours .15
11.4.1 General.15
11.4.2 Date and time of operating hours .15
11.4.3 Operating hours .15
11.4.4 Operating hours endpoint (Request) .15
© ISO 2016 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/TS 15143-3:2016(E)

11.4.5 Operating hours schema (Response) .16
11.5 Cumulative fuel used (preferred).16
11.5.1 General.16
11.5.2 Date and time of cumulative fuel used .16
11.5.3 Unit of measure of fuel used to date .16
11.5.4 Amount of fuel used to date .16
11.5.5 Cumulative fuel used endpoint (Request) .17
11.5.6 Cumulative fuel used schema (Response) .17
11.6 Fuel used in the preceding 24 hours (alternative, not preferred) .17
11.6.1 General.17
11.6.2 Date and time of fuel use in the preceding 24 hours .17
11.6.3 Unit of measure of fuel used in the preceding 24 hours .18
11.6.4 Fuel used in the preceding 24 hours .18
11.6.5 Fuel used in the preceding 24 hours endpoint (Request) .18
11.6.6 Fuel used in the preceding 24 hours schema (response) .18
11.7 C umulative distance travelled .18
11.7.1 General.18
11.7.2 Date and time of distance .19
11.7.3 Unit of measure of distance .19
11.7.4 Cumulative distance travelled .19
11.7.5 Cumulative distance travelled endpoint (Request) .19
11.7.6 Cumulative distance travelled schema (response) .19
11.8 Caution codes referencing number .20
11.8.1 General.20
11.8.2 Date and time of code .20
11.8.3 IEC/ISO Symbol Reference Number identifier .20
11.8.4 Code description .20
11.8.5 Caution codes referencing number endpoint (Request) .20
11.8.6 Caution codes referencing number schema (response) .20
11.9 Cumulative idle operating hours .21
11.9.1 General.21
11.9.2 Date and time of cumulative idle operating hours .21
11.9.3 Cumulative idle operating hours .21
11.9.4 Cumulative idle operating hours endpoint (Request) .21
11.9.5 Cumulative idle operating hours schema (response) .22
11.10 Fuel remaining ratio .22
11.10.1 General.22
11.10.2 Date and time of percent fuel remaining .22
11.10.3 Fuel Remaining Ratio .22
11.10.4 Unit of measure for fuel tank capacity .22
11.10.5 Fuel tank capacity .22
11.10.6 Fuel remaining ratio endpoint (Request) .23
11.10.7 Fuel remaining ratio schema (response) .23
11.11 Percent of DEF remaining .23
11.11.1 General.23
11.11.2 Date and time of percent DEF remaining .23
11.11.3 Percent of DEF remaining .23
11.11.4 Unit of measure for DEF tank capacity .24
11.11.5 DEF tank capacity . . .24
11.11.6 Percent DEF remaining endpoint (Request) .24
11.11.7 Percent DEF remaining schema (response) .24
11.12 Engine condition.24
11.12.1 General.24
11.12.2 Date and time of engine condition.25
11.12.3 Engine Number .25
11.12.4 Engine condition .25
11.12.5 Engine condition endpoint (Request) .25
11.12.6 Engine condition schema (response).25
iv © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/TS 15143-3:2016(E)

11.13 Digital input state .25
11.13.1 General.25
11.13.2 Date and time of digital input set response .26
11.13.3 Digital input number .26
11.13.4 1Digital input state . . .26
11.13.5 Digital input state endpoint (Request) .26
11.13.6 Digital input state schema (response) .26
11.14 Cumulative power takeoff hours .27
11.14.1 General.27
11.14.2 Date and time of cumulative power takeoff.27
11.14.3 Cumulative power takeoff hours .27
11.14.4 Cumulative power takeoff hours endpoint (Request) .27
11.14.5 Cumulative power takeoff hours schema (response) .27
11.15 A verage daily engine load factor .28
11.15.1 General.28
11.15.2 Date and time of average load factor .28
11.15.3 Average load factor for preceding 24 hour period .28
11.15.4 Average daily engine load factor endpoint (Request).28
11.15.5 Average daily engine load factor schema (response) .28
11.16 Peak daily speed .29
11.16.1 General.29
11.16.2 Date and time of peak travel speed .29
11.16.3 Units of measure for speed .29
11.16.4 Peak speed for the preceding 24 h .29
11.16.5 Peak daily speed endpoint (Request) .29
11.16.6 Peak daily speed schema (response) .29
11.17 Cumulative load count .30
11.17.1 General.30
11.17.2 Date and time of load count .30
11.17.3 Cumulative load count .30
11.17.4 Cumulative load count endpoint (Request) .30
11.17.5 Cumulative load count schema (response) .30
11.18 Cumulative payload total .31
11.18.1 General.31
11.18.2 Date and time of cumulative payload .31
11.18.3 Unit of measure for payload .31
11.18.4 Cumulative payload .31
11.18.5 Cumulative payload total endpoint (Request) .31
11.18.6 Cumulative payload total schema (response) .31
11.19 C umulative non-productive regeneration hours .32
11.19.1 General.32
11.19.2 Date and time for cumulative non-productive regeneration hours .32
11.19.3 Cumulative non-productive regeneration hours .32
11.19.4 Cumulative hours in non-productive regeneration endpoint (Request) .32
11.19.5 Cumulative hours in non-productive regeneration schema (response) .33
11.20 Cumulative idle non-operating hours .33
11.20.1 General.33
11.20.2 Date and time of cumulative idle nonoperating hours.33
11.20.3 Cumulative idle non-operating hours .33
11.20.4 Cumulative idle non-operating hours endpoint (Request) .33
11.20.5 Cumulative idle non-operating hours schema (response) .34
11.21 Data field descriptions for codes unique to each system .34
11.21.1 General.34
11.21.2 Diagnostic Trouble Code identifier .34
11.21.3 Date and time of code .35
11.21.4 Code severity .35
11.21.5 Code description .35
11.21.6 Unit of measure for ambient air temperature .35
© ISO 2016 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO/TS 15143-3:2016(E)

11.21.7 Ambient air temperature at time when code was triggered .35
11.21.8 Description of code source .35
11.21.9 Data fie
...