ISO 25297-2:2011

Optics and photonics — Electronic exchange of optical data — Part 2: Mapping to the classes and properties defined in ISO 23584

ISO 25297-2:2011 specifies the relationship between the terms used in ISO 25297-1 and the properties defined in ISO 23584-2 and provides the means to facilitate the use of both standards.

Optique et photonique — Transfert électronique des données optiques — Partie 2: Mappage des classes et propriétés definies dans l'ISO 23584

General Information

• Status: Published
• Publication Date: 07-Dec-2011
• ICS: 37.020 - Optical equipment
• Technical Committee: ISO/TC 172/SC 1 - Fundamental standards
• Drafting Committee: ISO/TC 172/SC 1 - Fundamental standards
• Current Stage: 9093 - International Standard confirmed
• Start Date: 01-Dec-2021
• Completion Date: 19-Apr-2025

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 25297-2
First edition
2011-12-15
Optics and photonics — Electronic
exchange of optical data —
Part 2:
Mapping to the classes and properties
defined in ISO 23584
Optique et photonique — Transfert électronique des données
optiques —
Partie 2: Mappage des classes et propriétés definies dans l'ISO 23584

Reference number
©
ISO 2011
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

Contents Page
Foreword . iv
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Mapping . 1
4.1  General . 1
4.2  Mapping table . 2
Annex A (informative) Class hierarchy . 22
Bibliography . 23

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 25297-2 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 1,
Fundamental standards.
ISO 25297 consists of the following parts, under the general title Optics and photonics — Electronic exchange
of optical data:
 Part 1: NODIF information model
 Part 2: Mapping to the classes and properties defined in ISO 23584

iv © ISO 2011 – All rights reserved

INTERNATIONAL STANDARD ISO 25297-2:2011(E)

Optics and photonics — Electronic exchange of optical data —
Part 2:
Mapping to the classes and properties defined in ISO 23584
1 Scope
This International Standard specifies the relationship between the terms used in ISO 25297-1 and the
properties defined in ISO 23584-2, and provides the means to facilitate the use of both standards.
NOTE This International Standard does not define all attributes of properties in ISO 23584-2.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 25297-1:2010, Optics and photonics  Electronic exchange of optical data  Part 1: NODIF information
model
ISO 23584-1, Optics and photonics  Specification of reference dictionary  Part 1: General overview on
organization and structure
ISO 13584-42, Industrial automation systems and integration — Parts library — Part 42: Description
methodology: Methodology for structuring parts families
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 25297-1, ISO 23584-1 and
ISO 13584-42 apply.
4 Mapping
4.1 General
The terms of the application objects and their attributes in NODIF are used as the preferred names in the
reference dictionary.
Underscores used in the terms in NODIF are omitted in the reference dictionary.
NOTE The reference dictionary ID numbers given for the keywords will be filled once they are registered in the
ISO/TC 172 reference dictionary database, which is under construction.
4.2 Mapping table
Table 1 and Table 2 show the relationship between keywords in NODIF and the classes and properties in the
ISO/TC 172 reference dictionary. Class hierarchy is depicted in Annex A for reference.

2 © ISO 2011 – All rights reserved

Table 1 — Mapping of the terms of classes in NODIF to the reference dictionary
Reference
NODIF keyword Hierarchy Super class Preferred name Definition Note dictionary
ID number
―
aperture Application ISO aperture application object to describe 4.3.25.6,
class TC172SC1/NODIF aperture of optical system 4.3.26.8 aperture in NODIF
―
Assembly_tolerance Application ISO assembly tolerance application object to specify assembly 4.3.18 Assembly_tolerance in
class TC172SC1/NODIF tolerance NODIF
Diffractive_surface_description Application ISO diffractive surface application object to describe 4.3.12 AAA017-001
class TC172SC1/NODIF description diffractive optical surface Diffractive_surface_description in
NODIF
―
Dimensional_tolerance Application ISO dimensional tolerance application object to specify tolerance 4.3.17 Dimensional_tolerance in
class TC172SC1/NODIF for dimensions of optical part NODIF
Material_property Application ISO material property application object to specify material 4.3.36 Material_property in NODIF ―
class TC172SC1/NODIF
―
Optical_design_formulation Application ISO optical design application object to collect 4.3.5 Optical_design_formulation in
class TC172SC1/NODIF formulation information relevant to optical design NODIF
―
Optical_evaluation Application ISO optical evaluation application object to describe 4.3.23 Optical_evaluation in NODIF
class TC172SC1/NODIF conditions and results of optical
evaluations
―
Optical_part_view_designator Application ISO optical part view application object to link information 4.3.2 Optical_part_view_designator
class TC172SC1/NODIF designator on optical systems/parts and the in NODIF
object “design discipline product
definition” in ISO 10303-203
―
Optical_process_specification Application ISO optical process application object to describe 4.3.15
class TC172SC1/NODIF specification machining process Optical_process_specification in
NODIF
―
Optical_specification Application ISO optical specification application object to contain various 4.3.13 Optical_specification in
class TC172SC1/NODIF specifications NODIF
―
Optical_system_specification Application ISO optical system application object to contain 4.3.4 Optical_system_specification
class TC172SC1/NODIF specification specifications of optical system in NODIF
―
Optical_tolerance Application ISO optical tolerance application object to describe optical 4.3.16 Optical_tolerance in NODIF
class TC172SC1/NODIF tolerance
Other_optical_evaluation Application ISO other optical application object to describe optical 4.3.31 Other_optical_evaluation in ―
class TC172SC1/NODIF evaluation evaluation based on external NODIF
definition
―
paraxial_ray_tracing Application ISO paraxial ray tracing application object to describe paraxial 4.3.24.6 paraxial_ray_tracing in
class TC172SC1/NODIF ray tracing results NODIF

4 © ISO 2011 – All rights reserved
Table 1 (continued)
Reference
NODIF keyword Hierarchy Super class Preferred name Definition Note dictionary
ID number
―
ray_tracing Application ISO ray tracing application object to describe real ray 4.3.25.10 ray_tracing in NODIF
class TC172SC1/NODIF tracing results
―
Specification_distinction Application ISO specification application object to indicate type of 4.3.3 Specification_distinction in
class TC172SC1/NODIF distinction optical design specification; official NODIF
specification requirements of optical
system or design requirements for
optical system
―
wavelength Application ISO wavelength application object to specify 4.3.14.5.2,
class TC172SC1/NODIF wavelength value or spectral line 4.3.24.2,
4.3.25.5,
4.3.14.5.2,
4.3.28.2 wavelength in NODIF
―
Zone Application ISO zone application object to specify optically 4.3.19 Zone in NODIF
class TC172SC1/NODIF effective area
zone_form Application ISO zone form application object to describe optically 4.3.19.2 zone_form in NODIF ―
class TC172SC1/NODIF effective elementary area
―
three-dimensional_real_vector Application ISO three-dimensional data type of component consisting of Figure A.6, Figure A.20 three-
class TC172SC1/NODIF real vector three elements; vector component or dimensional_real_vector in NODIF
direction cosine
―
other_tolerance Application dimensional other tolerance application object to describe 4.3.17.5 other_tolerance in NODIF
class tolerance tolerance for optical part based on
external definition
―
change_position Application multi-configuration change position application object to specify 4.3.8.13 change_position in NODIF
class arrangement of dynamic blocks in
optical system
―
Block_description Application optical design block description application object to describe moving 4.3.6 Block_description in NODIF
class formulation range of optical block
―
Cemented_part Application optical design cemented part application object to indicate 4.3.7 Cemented_part in NODIF
class formulation cemented optical part
―
Optical_path_definition Application optical design optical path definition application object to specify data 4.3.8 Optical_path_definition in
class formulation necessary to trace rays through NODIF
optical system
―
Ghost_image_evaluation Application optical evaluation ghost image application object to describe ghost 4.3.29 Ghost_image_evaluation in
class evaluation image evaluation NODIF
Illuminance_distribution Application optical evaluation illuminance application object to describe 4.3.27 ―
_evaluation class distribution evaluation illuminance distribution evaluation Illuminance_distribution_evaluation
in NODIF
Table 1 (continued)
Reference
NODIF keyword Hierarchy Super class Preferred name Definition Note dictionary
ID number
―
Optical_sensitivity_evaluation Application optical evaluation optical sensitivity application object to describe optical 4.3.30 Optical_sensitivity_evaluation
class evaluation sensitivity evaluation in NODIF
―
OTF_evaluation Application optical evaluation OTF evaluation application object to specify optical 4.3.26 OTF_evaluation in NODIF
class evaluation based on OTF
Paraxial_evaluation Application optical evaluation paraxial evaluation application object to describe optical 4.3.24 Paraxial_evaluation in NODIF ―
class evaluation by paraxial ray tracing
―
Ray_tracing_evaluation Application optical evaluation ray tracing evaluation application object to describe optical 4.3.25 Ray_tracing_evaluation in
class evaluation by real ray tracing NODIF
―
Spectral_characteristics Application optical evaluation spectral application object to describe spectral 4.3.28 Spectral_characteristics in
class characteristics characteristics NODIF
―
surface_imperfection_evaluation Application optical evaluation surface imperfection application object to describe surface 4.3.31
class evaluation imperfection evaluation surface_imperfection_evaluation in
NODIF
―
veiling_glare_index_evaluation Application optical evaluation veiling glare index application object to describe veiling 4.3.32
class evaluation glare index evaluation veiling_glare_index_evaluation in
NODIF
―
internal_transmittance Application optical material internal transmittance application object to indicate internal 4.3.14.8 internal_transmittance in
class specification transmittance of optical material NODIF
―
refractive_index_information Application optical material refractive index application object to describe 4.3.14.5
class specification information refractive index values and relevant refractive_index_information in
wavelength values of material NODIF
―
multi-configuration Application optical path multi-configuration application object to specify 4.3.8.11 multi-configuration in
class definition information on multiple configurations NODIF
in optical system
non-sequential_path_range Application optical path non-sequential path application object to specify range of 4.3.8.6 non-sequential_path_range ―
class definition range non-sequential path in NODIF
―
Surface_interface Application optical path surface interface application object to specify data for 4.3.9 Surface_interface in NODIF
class definition ra
...