ISO/DIS 14134
(Main)Optics and optical instruments -- Telescopic systems -- Specifications for astronomical telescopes
Optics and optical instruments -- Telescopic systems -- Specifications for astronomical telescopes
Optique et instruments d'optique -- Systèmes téléscopiques -- Spécifications pour lunettes astronomiques
General Information
RELATIONS
Standards Content (sample)
DRAFT INTERNATIONAL STANDARD ISO/DIS 14134
ISO/TC 172/SC 4 Secretariat: GOST R
Voting begins on Voting terminates on
2002-12-05 2003-05-05
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Optics and optical instruments — Telescopic systems —Specifications for astronomical telescopes
Optique et instruments d'optique — Systèmes téléscopiques — Spécifications pour lunettes astronomiques
ICS 37.020In accordance with the provisions of Council Resolution 15/1993 this document is circulated
in the English language only.Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est
distribué en version anglaise seulement.To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE REFERRED TO
AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO WHICH
REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.© International Organization for Standardization, 2002
---------------------- Page: 1 ----------------------
ISO/DIS 14134
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be reproduced,
stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying, recording or
otherwise, without prior written permission being secured.Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's member
body in the country of the requester.ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
---------------------- Page: 2 ----------------------
ISO/DIS 14134
Contents
1 Scope...................................................................................................................................................... 1
2 Normative references............................................................................................................................ 1
3 Terms and definitions........................................................................................................................... 1
4 Specifications ........................................................................................................................................ 2
4.1 Optical characteristics, values and tolerances..................................................................................2
4.2 Mechanical specifications.................................................................................................................... 2
4.3 Interfaces for accessories.................................................................................................................... 3
4.4 Optical specifications ........................................................................................................................... 3
4.5 Environmental requirements ............................................................................................................... 4
5 Designation and marking and information of the product................................................................ 5
5.1 Designation and marking ..................................................................................................................... 5
5.2 Information of the product ................................................................................................................... 6
© ISO 2002 — All rights reserved iii---------------------- Page: 3 ----------------------
ISO/DIS 14134
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
ISO shall not be held responsible for identifying any or all such patent rights.ISO 14134 was prepared by Technical Committee ISO/TC 172, Optics and optical instruments, Subcommittee
SC 4, Telescopic systems.iv © ISO 2002 — All rights reserved
---------------------- Page: 4 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 14134
Optics and optical instruments — Specifications for astronomical
telescopes
1 Scope
This International Standard applies to astronomical telescopes, including finder telescopes, and to their functional
specifications.These specifications are restricted to the amateur astronomical telescopes, which should be distinguished from
simple amusement telescopes, and give information about astronomical telescopes of commercial apertures.
2 Normative referencesThe following normative documents contain provisions which, through references in this text, constitute provisions
of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent editions of the normative documents indicated below. For
undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO
maintain registers of currently valid International Standards.ISO 1948:1987, Photography — Front lens barrels up to 127 mm — Dimensions important to the connection of
auxiliariesISO 10109-4:2001, Optics and optical instruments — Environmental requirements — Part 4: Test requirements for
telescopic systemsISO 14132-1 , Optics and optical instruments — Vocabulary for telescopic systems — Part 1: General terms and
alphabetical indexes of terms in ISO 14132ISO 14132-4 , Optics and optical instruments — Vocabulary fo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.