ISO/IEC 19763-3:2020/Amd 1:2024
(Amendment)Information technology — Metamodel framework for interoperability (MFI) — Part 3: Metamodel for ontology registration — Amendment 1: Alignment with Edition 4 of ISO/IEC 11179-3
Information technology — Metamodel framework for interoperability (MFI) — Part 3: Metamodel for ontology registration — Amendment 1: Alignment with Edition 4 of ISO/IEC 11179-3
Technologies de l'information — Cadre du métamodèle pour l'interopérabilité (MFI) — Partie 3: Métamodèle pour l'enregistrement de l'ontologie — Amendement 1: Titre manque
General Information
Relations
Buy Standard
Standards Content (Sample)
International
Standard
ISO/IEC 19763-3
Third edition
Information technology —
2020-10
Metamodel framework for
interoperability (MFI) —
AMENDMENT 1
2024-02
Part 3:
Metamodel for ontology registration
AMENDMENT 1: Alignment with
Edition 4 of ISO/IEC 11179-3
Reference number
ISO/IEC 19763-3:2020/Amd. 1:2024(en) © ISO/IEC 2024
---------------------- Page: 1 ----------------------
ISO/IEC 19763-3:2020/Amd. 1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO/IEC 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/IEC 19763-3:2020/Amd. 1:2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementa
...
International
Standard
ISO/IEC 19763-3
Third edition
Information technology —
2020-10
Metamodel framework for
interoperability (MFI) —
AMENDMENT 1
Part 3:
Metamodel for ontology registration
AMENDMENT 1: Alignment with
Edition 4 of ISO/IEC 11179-3
PROOF/ÉPREUVE
Reference number
ISO/IEC 19763-3/Amd. 1:2024(en) © ISO/IEC 2024
---------------------- Page: 1 ----------------------
ISO/IEC 19763-3/Amd. 1:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
PROOF/ÉPREUVE
© ISO/IEC 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/IEC 19763-3/Amd. 1:2024(en)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations,
governmental and non-governmental, in liaison with ISO and IEC, also take part in the work.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/
IEC Directives, Part 2 (see www.iso.org/directives or www.iec.ch/members_experts/refdocs).
ISO and IEC draw attention to the possibility that the implementation of this d
...
ISO/IEC 19763-3:2020/PRF Amd 1:2023(E)
Date: 2023-12-12
ISO/IEC JTC 1/SC 32/WG 2
Secretariat: ANSI
Date: 2024-01-03
Information technology — Metamodel framework for
interoperability (MFI) —
Part 3:
Metamodel for ontology registration
AMENDMENT 1: Alignment with Edition 4 of ISO/IEC 11179-3
PROOF
---------------------- Page: 1 ----------------------
ISO/IEC 19763-3:2020/PRF Amd 1:2023(E)
© ISO/IEC 20232020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Office copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
Email: copyright@iso.org
E-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Published in Switzerland.
ii © ISO/IEC 2023 – All rights reserved
© ISO/IEC 2024 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/IEC 19763-3:2020/PRF Amd 1:2023(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical activity.
ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of document should be noted. This document was drafted in accordance with the editorial
rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directiveswww.iso.org/directives or
www.iec.ch/members_experts/refdocs).
Field Code Changed
ISO and IEC draw attention to the possibili
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.