ISO/DIS 14133-2

Optics and optical instruments -- Specifications for binoculars, monoculars and spotting scopes

Optique et instruments d'optique -- Spécifications pour jumelles, monoculaires et lunettes

Standards Content (sample)

DRAFT INTERNATIONAL STANDARD ISO/DIS 14133-2
ISO/TC 172/SC 4 Secretariat: GOST R
Voting begins on Voting terminates on
2002-12-05 2003-05-05

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION

Optics and optical instruments — Specifications for
binoculars, monoculars and spotting scopes —
Part 2:
High performance instruments

Optique et instruments d'optique — Spécifications pour jumelles, monoculaires et lunettes —

Partie 2: Instruments haute performance
ICS 37.020

In accordance with the provisions of Council Resolution 15/1993 this document is circulated

in the English language only.

Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est

distribué en version anglaise seulement.

To expedite distribution, this document is circulated as received from the committee

secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at

publication stage.

Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du

secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au

Secrétariat central de l'ISO au stade de publication.

THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE REFERRED TO

AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.

IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT

INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO WHICH

REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
© International Organization for Standardization, 2002
---------------------- Page: 1 ----------------------
ISO/DIS 14133-2
Copyright notice

This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted

under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be reproduced,

stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying, recording or

otherwise, without prior written permission being secured.

Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's member

body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2002 — All rights reserved
---------------------- Page: 2 ----------------------
ISO/DIS 14133-2
Contents

Foreword .................................................................................................................................................................... iv

1 Scope.............................................................................................................................................................. 1

2 Normative references.................................................................................................................................... 1

3 Terms and definitions................................................................................................................................... 1

4 Specifications ................................................................................................................................................ 1

4.1 Tolerances ..................................................................................................................................................... 1

4.2 Minimum requirements to optical characteristics ..................................................................................... 2

4.3 Environmental requirements ....................................................................................................................... 3

5 Designation, marking and information of the product.............................................................................. 3

5.1 Designation and marking ............................................................................................................................. 3

5.2 Information of the product ........................................................................................................................... 4

Bibliography................................................................................................................................................................ 5

© ISO 2002 — All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/DIS 14133-2
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO

member bodies). The work of preparing International Standards is normally carried out through ISO technical

committees. Each member body interested in a subject for which a technical committee has been established has

the right to be represented on that committee. International organizations, governmental and non-governmental, in

liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical

Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted

by the technical committees are circulated to the member bodies for voting. Publication as an International

Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.

ISO shall not be held responsible for identifying any or all such patent rights.

ISO 14133-2 was prepared by Technical Committee ISO/TC 172, Optics and optical instruments, Subcommittee

SC 4, Telescopic systems.

ISO 14133 consists of the following parts, under the general title Optics and optical instruments — Specifications

for binoculars, monoculars and spotting scopes:
 Part 1: General purpose instruments
 Part 2: High performance instruments
iv © ISO 2002 — All rights reserved
---------------------- Page: 4 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 14133-2
Optics and optical instruments — Specifications for
binoculars, monoculars and spotting scopes —
Part 2:
High performance instruments
1 Scope
This part of ISO 141
...