ISO 12488-1:2005/Cor 1:2008

Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General — Technical Corrigendum 1

This part of ISO 12488 specifies tolerances for construction assemblies and operational conditions of cranes and associated crane tracks as defined in ISO 4306-1. The purpose of the requirements in this part of ISO 12488 is to promote safe operation and achievement of the expected life of components by the elimination of excessive load effects due to deviations or misalignments from the normal dimensions of the structure. Tolerances given are extreme values. The elastic deformations due to load effects are outside the scope of this part of ISO 12488. These will need to be taken into account at the design stage using other criteria to achieve the intended operation and performance. Specific values for particular crane types are given in other parts of ISO 12488.

Appareils de levage à charge suspendue — Tolérances des roues et des voies de roulement et de déplacement — Partie 1: Généralités — Rectificatif technique 1

Žerjavi - Tolerance za kolesa, gibanje in vozne proge - 1. del: Splošno - Popravek

Ta del standarda ISO 12488 določa tolerance za konstrukcijske sestave in obratovalne pogoje žerjavov in povezanih prog žerjavov iz standarda ISO 4306-1. Namen zahtev v tem delu standarda ISO 12488 je spodbujati varno obratovanje in doseganje pričakovane življenjske dobe sestavnih delov z odpravo učinkov prekomernih obremenitev zaradi odstopanj od normalnih mer strukture ali neporavnanosti z njimi. Navedene tolerance so skrajne vrednosti. Elastične deformacije zaradi učinkov obremenitev ne spadajo v področje uporabe tega dela standarda ISO 12488. Deformacije bo treba upoštevati v fazi načrtovanja z uporabo drugih meril, da se dosežeta nameravano obratovanje in učinkovitost. Posebne vrednosti za posamezne vrste žerjavov so navedene v drugih delih standarda ISO 12488.

General Information

• Status: Withdrawn
• Publication Date: 11-Nov-2008
• Withdrawal Date: 11-Nov-2008
• ICS: 53.020.20 - Cranes
• Technical Committee: ISO/TC 96/SC 8 - Jib cranes
• Drafting Committee: ISO/TC 96/SC 8 - Jib cranes
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 26-Jun-2012
• Ref Project: SIST ISO 12488-1:2012/Cor 1:2012 - Cranes - Tolerances for wheels and travel and traversing tracks - Part 1: General

Relations

• Revised: ISO 12488-1:2012 - Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
• Effective Date: 28-Aug-2010
• Corrects: ISO 12488-1:2005 - Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
• Effective Date: 06-Jun-2022
• Child: ISO 12488-1:2005 - Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
• Effective Date: 04-Sep-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Žerjavi - Tolerance za kolesa, gibanje in vozne proge - 1. del: Splošno - PopravekAppareils de levage à charge suspendue - Tolérances des roues et des voies de roulement et de déplacement - Partie 1: GénéralitésCranes - Tolerances for wheels and travel and traversing tracks - Part 1: General53.020.20DvigalaCranesICS:Ta slovenski standard je istoveten z:ISO 12488-1:2005/Cor 1:2008SIST ISO 12488-1:2012/Cor 1:2012en01-oktober-2012SIST ISO 12488-1:2012/Cor 1:2012SLOVENSKI
STANDARD



SIST ISO 12488-1:2012/Cor 1:2012



ICS
53.020.20 Ref. No. ISO 12488-1:2005/Cor.1:2008(E)©
ISO 2008 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 12488-1:2005 TECHNICAL CORRIGENDUM 1 Published 2008-11-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Cranes — Tolerances for wheels and travel and traversing tracks —
Part 1: General TECHNICAL CORRIGENDUM 1 Appareils de levage à charge suspendue — Tolérances des roues et des voies de roulement et de déplacement —
Partie 1: Généralités RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to International Standard ISO 12488-1:2005 was prepared by Technical Committee ISO/TC 96, Cranes, Subcommittee SC 8, Jib cranes.
Page 2,
...