ISO 3684:1990/Amd 1:2006

Conveyor belts — Determination of minimum pulley diameters — Amendment 1

Courroies transporteuses — Détermination des diamètres minimaux des tambours — Amendement 1

Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Določitev minimalnega premera bobnov - Dopolnilo A1

General Information

• Status: Published
• Publication Date: 18-Jan-2006
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: ISO/TC 41/SC 3 - Conveyor belts
• Drafting Committee: ISO/TC 41/SC 3 - Conveyor belts
• Current Stage: 6060 - International Standard published
• Due Date: 21-Oct-2007
• Completion Date: 19-Jan-2006
• Ref Project: SIST ISO 3684:1997/Amd 1:2020 - Conveyor belts - Determination of minimum pulley diameters

Relations

• Amends: ISO 3684:1990 - Conveyor belts — Determination of minimum pulley diameters
• Effective Date: 06-Jun-2022
• Child: ISO 3684:1990 - Conveyor belts — Determination of minimum pulley diameters
• Effective Date: 15-Apr-2008
• Child: SIST ISO 3684:1997 - Conveyor belts -- Determination of minimum pulley diameters
• Effective Date: 12-May-2008

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 3684
Second edition
1990-03-15
AMENDMENT 1
2006-01-15
Conveyor belts — Determination of
minimum pulley diameters
AMENDMENT 1
Courroies transporteuses — Détermination des diamètres minimaux
des tambours
AMENDEMENT 1




Reference number
ISO 3684:1990/Amd.1:2006(E)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 3684:1990/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2006 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3684:1990/Am
...

NORME ISO
INTERNATIONALE 3684
Deuxième édition
1990-03-15
AMENDEMENT 1
2006-01-15

Courroies transporteuses —
Détermination des diamètres minimaux
des tambours
AMENDEMENT 1
Conveyor belts — Determination of minimum pulley diameters
AMENDMENT 1




Numéro de référence
ISO 3684:1990/Amd.1:2006(F)
©
ISO 2006

---------------------- Page: 1 ----------------------
ISO 3684:1990/Amd.1:2006(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2006
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Publié en Suisse

ii © ISO 2006 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 3684:1990/Amd.1:2006(F)
Avant-propos
L'ISO (Organisation
...

SLOVENSKI STANDARD
SIST ISO 3684:1997/Amd 1:2020
01-oktober-2020
Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Določitev
minimalnega premera bobnov - Dopolnilo A1
Conveyor belts - Determination of minimum pulley diameters
Courroies transporteuses - Détermination des diamètres minimaux des tambours
Ta slovenski standard je istoveten z: ISO 3684:1990/Amd 1:2006
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST ISO 3684:1997/Amd 1:2020 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 3684:1997/Amd 1:2020

---------------------- Page: 2 ----------------------
SIST ISO 3684:1997/Amd 1:2020


INTERNATIONAL ISO
STANDARD 3684
Second edition
1990-03-15
AMENDMENT 1
2006-01-15
Conveyor belts — Determination of
minimum pulley diameters
AMENDMENT 1
Courroies transporteuses — Détermination des diamètres minimaux
des tambours
AMENDEMENT 1




Reference number
ISO 3684:1990/Amd.1:2006(E)
©
ISO 2006

---------------------- Page: 3 ----------------------
SIST ISO 3684:1997/Amd 1:2020
ISO 3684:1990/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member bod
...

SLOVENSKI STANDARD
SIST ISO 3684:1997/oAmd 1:2020
01-junij-2020
Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Določitev
minimalnega premera bobnov
Conveyor belts - Determination of minimum pulley diameters
Courroies transporteuses - Détermination des diamètres minimaux des tambours
Ta slovenski standard je istoveten z: ISO 3684:1990/Amd 1:2006
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST ISO 3684:1997/oAmd 1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 3684:1997/oAmd 1:2020

---------------------- Page: 2 ----------------------
SIST ISO 3684:1997/oAmd 1:2020


INTERNATIONAL ISO
STANDARD 3684
Second edition
1990-03-15
AMENDMENT 1
2006-01-15
Conveyor belts — Determination of
minimum pulley diameters
AMENDMENT 1
Courroies transporteuses — Détermination des diamètres minimaux
des tambours
AMENDEMENT 1




Reference number
ISO 3684:1990/Amd.1:2006(E)
©
ISO 2006

---------------------- Page: 3 ----------------------
SIST ISO 3684:1997/oAmd 1:2020
ISO 3684:1990/Amd.1:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in t
...