ISO 15037-1:2019

Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars

This document specifies the general conditions that apply when vehicle dynamics properties are determined according to ISO test methods. In particular, it specifies general conditions for: — variables; — measuring equipment and data processing; — environment (test track and wind velocity); — test vehicle preparation (tuning and loading); — initial driving; and — test reports (general data and test conditions). These items are of general significance, regardless of the specific vehicle dynamics test method. They apply when vehicle dynamics properties are determined, unless other conditions are required by the standard which is actually used for the test method. This document is applicable to passenger cars as defined in ISO 3833 and light trucks. NOTE The general conditions defined in existing vehicle dynamics standards are valid until a reference to this document is included. This document is cited in many other standards without a dated reference. In the course of its revision, no change in the numbering of clauses, tables and figures is anticipated.

Véhicules routiers — Méthodes d'essai de la dynamique des véhicules — Partie 1: Conditions générales pour voitures particulières

General Information

• Status: Published
• Publication Date: 09-Jan-2019
• ICS: 43.100 - Passenger cars. Caravans and light trailers
• Technical Committee: ISO/TC 22/SC 33 - Vehicle dynamics and chassis components
• Drafting Committee: ISO/TC 22/SC 33/WG 2 - Vehicle dynamics of passenger cars
• Current Stage: 9020 - International Standard under periodical review
• Start Date: 15-Jan-2024
• Completion Date: 15-Jan-2024

Relations

• Consolidated By: ISO/TS 24283-3:2022 - Geotechnical investigation and testing — Qualification criteria and assessment — Part 3: Qualified enterprise
• Effective Date: 06-Jun-2022
• Revises: ISO 15037-1:2006 - Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars
• Effective Date: 21-Nov-2015

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 15037-1
Third edition
2019-01
Corrected version
2019-03
Road vehicles — Vehicle dynamics test
methods —
Part 1:
General conditions for passenger cars
Véhicules routiers — Méthodes d'essai de la dynamique des
véhicules —
Partie 1: Conditions générales pour voitures particulières
Reference number
ISO 15037-1:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 15037-1:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 15037-1:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Variables . 2
4.1 Reference system . 2
4.2 Variables to be determined . 2
5 Measuring equipment . 3
5.1 Description . 3
5.2 Transducer installations . 3
5.3 Data processing . 3
5.3.1 General. 3
5.3.2 Analogue data processing . 4
5.3.3 Digital data processing . 4
6 Test conditions . 5
6.1 General . 5
6.2 Test track .
...