ISO 12460-1:2007/Amd 1:2023

Wood-based panels — Determination of formaldehyde release — Part 1: Formaldehyde emission by the 1-cubic-metre chamber method — Amendment 1: Other analytical procedures

Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 1: Méthode du dégagement de formaldéhyde en chambre de 1 mètre cube — Amendement 1: Autres méthodes d’analyse

General Information

• Status: Published
• Publication Date: 03-Apr-2023
• ICS: 79.060.01 - Wood-based panels in general
• Technical Committee: ISO/TC 89 - Wood-based panels
• Drafting Committee: ISO/TC 89 - Wood-based panels
• Current Stage: 6060 - International Standard published
• Start Date: 04-Apr-2023
• Due Date: 12-Apr-2024
• Completion Date: 04-Apr-2023

Relations

• Amends: ISO 12460-1:2007 - Wood-based panels — Determination of formaldehyde release — Part 1: Formaldehyde emission by the 1-cubic-metre chamber method
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 12460-1
First edition
2007-09-15
AMENDMENT 1
2023-04
Wood-based panels — Determination
of formaldehyde release —
Part 1:
Formaldehyde emission by the
1-cubic-metre chamber method
AMENDMENT 1: Other analytical
procedures
Panneaux à base de bois — Détermination du dégagement de
formaldéhyde —
Partie 1: Méthode du dégagement de formaldéhyde en chambre de 1
mètre cube
AMENDEMENT 1: Autres méthodes d’analyse
Reference number
ISO 12460-1:2007/Amd.1:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 12460-1:2007/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12460-1:2007/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should b
...

2023-01-21 Style Definition: Normal
Style Definition: Heading 1: Indent: Left: 0 pt, First
ISO 12460-1:2007/Amd.1:2023(E)
line: 0 pt, Tab stops: Not at 21.6 pt
Style Definition: Heading 2: Font: Bold, Tab stops: Not
ISO /TC 89/SC /WG 5
at 18 pt
Style Definition: Heading 3: Font: Bold
2023-xx
Style Definition: Heading 4: Font: Bold
Secretariat: DIN
Style Definition: Heading 5: Font: Bold
Style Definition: Heading 6: Font: Bold
Style Definition: ANNEX
Style Definition: AMEND Terms Heading: Font: Bold
Wood-based panels — Determination of formaldehyde release — Part 1: Formaldehyde
Style Definition: AMEND Heading 1 Unnumbered:
emission by the 1-cubic-metre chamber method —
Font: Bold
AMENDMENT 1: Other analytical procedures
Panneaux à base de bois — Détermination du dégagement de formaldéhyde — Partie 1: Méthode
du dégagement de formaldéhyde en chambre de 1 mètre cube — AMENDEMENT 1

---------------------- Page: 1 ----------------------
ISO 12460-1:2007/Amd.1:2023(E)
© ISO 2023
Formatted: Pattern: Clear
Formatted: Pattern: Clear
All rights reserved. Unless otherwise specified, or required in the context of its implementation,
no part of this publication may be reproduced or utilized otherwise in any form or by any means,
electronic or mechanical, including photocopying, or posting on the internet or an intranet,
without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12460-1:2007/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, t
...

INTERNATIONAL ISO
STANDARD 12460-1
First edition
2007-09-15
AMENDMENT 1
Wood-based panels — Determination
of formaldehyde release —
Part 1:
Formaldehyde emission by the
1-cubic-metre chamber method
AMENDMENT 1: Other analytical
procedures
Panneaux à base de bois — Détermination du dégagement de
formaldéhyde —
Partie 1: Méthode du dégagement de formaldéhyde en chambre de 1
mètre cube
AMENDEMENT 1: Autres méthodes d’analyse
PROOF/ÉPREUVE
Reference number
ISO 12460-1:2007/Amd.1:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 12460-1:2007/Amd.1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
PROOF/ÉPREUVE © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 12460-1:2007/Amd.1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. Thi
...