ISO 13993:2019

Rental ski shop practice — Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications

This document specifies a uniform method for the sampling and inspection of complete and incomplete alpine ski-binding-boot systems used in rental operations. This document is intended for any facility which rents complete and incomplete alpine ski-binding-boot systems as for example when the skier owns the boots. This document is not applicable for alpine touring ski-binding-boot systems. This document is not applicable for complete and incomplete alpine ski-binding-boot systems which are rented for 15 days or more. NOTE 1 A period of less than 15 days is common for equipment being rented. NOTE 2 ISO 11088 gives a method for testing if the equipment is owned or rented for 15 days or more.

Pratique pour la location dans les commerces de matériel de ski —Échantillonnage et contrôle des ensembles complets ou incomplets ski/fixation/chaussure dans les applications de location

General Information

• Status: Published
• Publication Date: 04-Mar-2019
• ICS: 97.220.20 - Winter sports equipment
• Technical Committee: ISO/TC 83/SC 4 - Snowsports equipment
• Drafting Committee: ISO/TC 83/SC 4/WG 2 - Bindings for ski and snowboard
• Current Stage: 9092 - International Standard to be revised
• Completion Date: 08-Jan-2024

Relations

• Revises: ISO 13993:2001 - Rental ski shop practice — Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications
• Effective Date: 07-May-2016

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13993
Second edition
2019-03
Rental ski shop practice — Sampling
and inspection of complete and
incomplete alpine ski-binding-boot
systems in rental applications
Pratique pour la location dans les commerces de matériel de ski —
Échantillonnage et contrôle des ensembles complets ou incomplets
ski/fixation/chaussure dans les applications de location
Reference number
ISO 13993:2019(E)
©
ISO 2019

---------------------- Page: 1 ----------------------
ISO 13993:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13993:2019(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Range classes . 4
5 Summary of practice . 4
6 Equipment inspection requirements . 6
6.1 Preseason inspection . 6
6.2 In-season inspection . 7
6.3 System inspection of incomplete ski-binding-boot system used with customer
owned components . 7
7 Sampling requirements . 8
7.1 Sample size . 8
7.2 Sampling frequency and handling deviations . 8
8 Sampling and inspection procedures . 9
8.1 Preseason check . 9
8.1.1 General. 9
8.1.2 Boot inspection .
...