Ebonite — Determination of hardness by means of a durometer

Ébonite — Détermination de la dureté au moyen d'un duromètre

General Information

Status
Withdrawn
Publication Date
30-Apr-1975
Withdrawal Date
30-Apr-1975
Current Stage
9599 - Withdrawal of International Standard
Completion Date
01-Apr-1991
Ref Project

Buy Standard

Standard
ISO 2783:1975 - Ebonite -- Determination of hardness by means of a durometer
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 2783:1975 - Ebonite — Determination of hardness by means of a durometer Released:5/1/1975
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

,*Bi*,
INTERNATIONAL STANDARD @ 'ai!& 2783
INTERNATIONAL ORGANIZ4TION FOR STANDARDIZATION *MEEAYHAPOnHAR OPTAHMJAUMX no CTAHAAPTH3AUHH.ORGANlSATlON INTERNATIONALE DE NORMALISATION
0
Ebonite - Determination of hardness by means of a durometer
Ébonite - Détermination de la dureté au moyen d'un duromètre
First edition - 1975-05-15
*
- w UDC 678.44 : 678.01 : 539.53 Ref. No. IS0 2783-1975 (E)
U>
pi
2
Descriptors : rubber, vulcanized elastomers, ebonite, tests, hardness tests, hardness testers.
r4
Co pi
N
O
Price based on 2 pages
II

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 2783 was drawn up by Technical Committee
ISO/TC 45, Rubber and rubber products, and circulated to the Member Bodies in
July 1972.
It has been approved by the Member Bodies of the following countries :
Germany South Africa, Rep. of
Austria
Belgium India Sri Lanka
Brazil Italy Sweden
Canada Netherlands Switzerland
Czechoslovakia Poland Thai land
United Kingdom
Egypt, Arab Rep. of Portugal
U.S.A.
France Romania
The Member Body of the following country expressed disapproval of the
document on technical grounds :
Australia
0 International Organization for Standardization, 1975
Printed in Switzerland

---------------------- Page: 2 ----------------------
IS0 2783-1975 (E)
iNTERNATl ONAL STANDARD
Ebonite - Determination of hardness by means of a durometer
uniform scale ranging from zero (for full extension of 2,46
1 SCOPE AND FIELD OF APPLICATION
to 2,54 mm) to 100 for zero extension obtained by placing
1.1 This International Standard specifies a type of
presser foot and indentor in firm contact with a flat piece
durometer and the procedure suitable for determining the
of glass.
indentation hardness of ebonite.
3.4 Calibrated spring for applying a force F, expressed in
newtons, to the indentor in accordance with the following
1.2 This method measures the penetration of a specified
equation :
indentor forced into the material under specified
conditions. The indentation hardness is inversely related to
F = 0,444 8 HD
the penetration as defined in 3.3 and is dependent on the
elastic modulus and viscoelastic behaviour of the material.
where HD is the hardness reading on a durometer.
The shape of the indentor and the force applied to it
NOTE -The Shore durometer type D complies with these
influence the results obtained so that there may be no requirements.
simple relationship between the results obtained with one
type of durometer and those obtained with either another
4 TEST PIECE
type of durometer or another instrument for measuring
hardness. This method is an empirical test intended
4.1 The test piece shall be at least 3 mm thick.
No simple relationship
primarily for control purposes.
exists between indentation hardness determination by this
4.2 The lateral dimensions of the test piece shall be
method and any fundamental property of the material
sufficient to permit measurements at least 12 mm from any
tested.
edge unless it is known that identical results are obtained
when measurements are made at a lesser distance from any
edge. The surface of the test piece must be flat over
2 REFERENCE
sufficient area to permit the pressure foot to contact the
test piece over an area having a radius of at least 6 mm from
ISOIR 47 1, Standard atmospheres for the conditioning and
the indentor point. Satisfactory
...

NORME INTERNATIONALE 2783
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION MEXnYHAPOnHAR OPTAHH3AUHR II0 CTAHnAPTH3AUHA .ORGANISATION INTERNATIONALE DE NORMALISATION
0 Ébonite - Détermination de la dureté au moyen d'un
duromètre
Ebonite - Determination of hardness by means of a durometer
Première édition - 1975-05-15
Réf. no : IS0 2783-1975 (FI
CDU 678.44 : 678.01 : 539.53
Descripteurs : caoutchouc, caoutchouc vulcanisé, ébonite. essai, essai de dureté, duromètre.
Prix base sur 2 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L'ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (Comités Membres ISO). L'élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I'ISO.
La Norme Internationale IS0 2783 a été établie par le Comité Technique
ISO/TC 45, Élastomères et produits à base d'élastomères, et soumise aux Comités
Membres en juillet 1972.
Elle a été approuvée par les Comités Membres des pays suivants :
Afrique du Sud, Rép. d' France Royaume-Uni
Al lemagne Inde Sri Lanka
Autriche Italie Suède
Belgique Pays-Bas Suisse
Brésil Pologne Tchécoslovaquie
Canada Portugal Thaïlande
Egypte, Rép. arabe d' Roumanie U.S.A.
Le Comité Membre du pays suivant a désapprouvé le document pour des
raisons techniques :
Australie
O Organisation Internationale de Normalisation, 1976 O
lmorirné en Suisse

---------------------- Page: 2 ----------------------
IS0 2783-1975 (F)
NORME INTERNATIONALE
Ebonite - Détermination de la dureté au moyen d'un
duromètre
1 OBJET ET DOMAINE D'APPLICATION de façon que le zéro corresponde à une pénétration
de 2,46 à 2.54 mm et le 100 à une pénétration nulle,
1.1 La présente Norme Internationale spécifie un type de
obtenue en placant le pied presseur et le pénétreur
duromètre et une méthode appropriée pour la détermination
fermement en contact avec une plaque en verre plane.
de la dureté par indentation de l'ébonite.
3.4 Ressort étalonné, destiné à appliquer une force F,
1.2 Le principe de la méthode consiste à mesurer
exprimée en newtons, sur le pénétreur, selon la relation
l'enfoncement d'un pénétreur déterminé dans le matériau,
F = 0,444 8 HD
SOUS des conditions données. La dureté par indentation est
inversement proportionnelle à la pénétration définie en 3.3
où HD est la dureté lue sur le duromètre.
et dépend du module d'élasticité et du comportement
visco-élastique du matériau.
NOTE - Le duromètre Shore type D est conforme à ces
spécifications.
La forme du pénétreur et la force qui lui est appliquée
telle les résultats obtenus qu'il n'y a
influencent de façon
pas de relations simples entre les résultats obtenus avec un
4 ÉPROUVETTE
certain type de duromètre et ceux obtenus soit avec un
4.1 L'éprouvette doit avoir au moins 3 mm d'épaisseur.
autre type de duromètre, soit avec un autre instrument
pour mesurer la dureté. Cette méthode est un essai
4.2 Les dimensions latérales de l'éprouvette doivent être
empirique initialement prévu dans un but de contrôle.
telles que l'on puisse effectuer les mesurages à au moins
Aucune relation simple n'existe entre la dureté par inden-
12 mm des bords, 2 moins qu'il n'ait été reconnu que des
tation obtenue selon cette méthode et toute propriété
résultats identiques sont obtenus lorsque les mesurages sont
fondamentale quelconque du matériau essayé.
faits à une distance inférieure des bords. La surface de
l'éprouvette doit être plane sur une portion suffisante pour
permettre au pied presseur de prendre appui sur
2 RÉFÉRENCE
l'éprouvette sur une surface ayant un rayon d'au moins
ISOIR 47 1, Atmosphèresnormales pour le conditionnement
6 mm autour de la pointe du pénétreur. Une détermination
a
et les essais des éprouvettes de caoutchouc.
satisfaisante de la dureté ne peut être obtenue sur des
surfaces arrondies, irrégulières ou rugueuses.
3 APPAREILLAGE
5 ÉTALONNAGE
Duromètre, constitué des composants suivants :
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.